Bio Techno Lab

Marine Lines, Mumbai, Maharashtra

We are one of the leading Manufacturers and Suppliers of Laboratory Water Bath. Laboratory Water Bath, offered by us, is double walled unit with inner chamber and top lid (pyramidal) made of S.S., and outer chamber made of M.S. with powder coating. There is a gap between the walls filled with glass wool insulation to avoid heat loss. The inner chamber of Laboratory Water Bath is fitted with immersion type heating element.

Features :

• Temperature range 5^oC above ambient to 60^oC with accuracy of ± 2^oC
• Long casting heating element
• Operates on 230 Volts AC only

Avail from us, quality Bacteriological Incubators with sturdy double walls. Inner and outer chambers of our Bacteriological Incubator are made of stainless steel (SS) and mild steel respectively, and powder coating is also performed on this incubator. Gap is provided between the walls fitted with glass wool insulation to avoid heat loses and heating elements are made of high-grade chrome plated nichrome wire. Our Bacteriological Incubator works at a temperature range of 5^oC to 60^oC with an accuracy of ± 2^oC, and a thermostat is provided in this incubator to control temperature.

Features :

• Air ventilation to remove the hot gases / fumes.
• Heaters are placed in the bottom side of the unit
• All the control switches & pilot lamps are fitted on the front panel
• Trays should be supplied with GI wire mesh
• Thermostat is provided to control the temperature

We are instrumental in offering high quality BOD (Biological Oxygen Demand) Incubator to the clients. Our BOD Incubator has castor wheel mounted on it, and is double walled with inner chamber of stainless steel & outer wall of M.S. sheet duly powder coated. Double walled back of the BOD Incubator is fitted with air circulation fan for maintaining temperature uniformity throughout the chamber. Full view of inner glass door permits inspection of specimens without disturbing the same. Lock & Key arrangement is provided in the double walled outer door. Our BOD Incubator is fitted with door operated illumination lamp inside the chamber, and the front panel is provided with separate indicator lamps for main, heating & incoming voltage.

Features :

• Supplied with adjustable shelves, cord & plug to work on 220-230 volts AC supply
• Works at temperature range of 5^oC to 60^oC
• Accuracy ±0.5^oC
• Temperature is controlled by digital temperature indicator – cum – controller

The Environmental Test Chamber is used for creating ideal conditions for industrial component / product research and bio technical specification test. The Environmental Test Chamber is the most accurate and reliable chamber for long-term high temperature and RH testing. The Environmental Test Chamber has temperature range from 10^oC to 60^oC with an accuracy +- 0.5^oC and relative humidity range from 35% RH to 90% with an accuracy +-3% RH.

Details :

• A positive vertical air circulation ensures temperature and RH uniformity.
• Digitally set, temperature and Humidity controller with direct digital read out in temperature and percentage RH.
• Low pressure Boiler to generate steam for chamber humidification.
• Well balanced refrigeration system.
• Double walled construction inner chamber S.S. and outside of Mild steel beautifully powder coated.
• The chamber is provided with modular removable shelves made of S.S. for complete flexibility in use.
• A key lockable insulated door having positive door gasket seals doors perfectly.
• Control panel mounted on the top of the Unit.
• It work on 230 volts. A.C. only.

Sizes

• 45 x 45 x 45 Cm.
• 71 x 45 x 45 Cm.
• 85 x 50 x 50 Cm.
• 100 x 90 x 90 Cm.
• 190 x 100 x 100 Cm.

We offer Hot Air Oven to the clients. Our Hot Air Oven has a double walled inner made of thick stainless steel and mild steel. Outer wall of Hot Air Oven is made of heavy duty mild steel G.I. This Hot Air Oven is duly powder coated which makes it long lasting. Further, we are a prime Manufacturer and Supplier of Hot Air Oven.

Features :

• Temperature range 50^oC to 250^oC
• Temperature accuracy ± 2^oC
• Controlled by thermostatic

Laboratory Oil Bath has double walled construction with inner side made up of stainless steel & outer side of mild steel sheet duly powder coated. The gap between the two walls of Laboratory Oil Bath is fitted with high-grade glass wool to minimize thermal loss. The temperature range of Laboratory Oil Bath varies from ambient 50^oC to 250^oC accuracy ± 2 ^oC.
Other Details : The temperature maintains to work on 220/230 volts A.C. supply

Specifications :

• Double walled with inside made up of stainless steel & outside of mild steel sheet duly powder coated.
• The gap between the two walls is fitted with high – grade glass wool to minimize thermal loss.
• Temperature range from ambient 50 ^oC to 250^oC accuracy ± 2 ^oC.
• The temperature maintains to work on 220/230 volts A.C. supply.

We offer Constant Temperature Water Bath. Rectangular double walled in construction. Inner chamber made of stainless steel & outer body made of mild steel duly powder coated. Temperature range 5ºC above ambient to 95^oC. Fitted with immersion type heater, digital temperature controller cum indicator accuracy ±0.5ºC. Operating on 230 V AC. Fitted with circular pump with stirrer to re-circulate water at constant temperature.

Size Cm Inch : 30X25X20 12”X10”X8” 45x30x25 18”X12”X10” 45X35X30 18”X14”X12”