Birla Precision offers boring bar blanks on various tapers in Different dia. & in standard gauge lengths. The front end is provided with the hardness in the range of 25 to 30 HRC which provides ease of converting it to Spl Tools.

Birla Precision offers all varieties of ER/TG/DA collets in metric & Inch sizes. Collets in sets are also supplied as per DIN 6499. Pull Studs/Retention studs manufactured from low carbon alloy steel & spl care taken in H/T avoid cracking to ensure reliability.  Pull studs for coolant through application are also supplied.

High Precision Fuel Injection System parts: Retainer Shafts, Adaptors, Guides, Covers, Housings. Our Engineering team with thorough experience on application works throughout the project right from Design review up to PAP approval including documentation.    

• Accuracy0.005 mm or 0.00002” w.r.t.Taper., 0.008 mm or 0.0003” w.r.t .Taper.

the largest variety and highest quality standard Collet Chucks. ER, TG and DA Collet Chucks on BTDVCAT & HSK tapers Metric & in Metric & Inch version available. Straight shank extensions are available as well. ER collet chucks guarantee run out accuracy of 0.005 mm or 0.00002” w.r.t.Taper. TG & DA Collet chucks guarantee run out accuracy of 0.008 mm or 0.0003” w.r.t .Taper. ER Lock nuts are supplied with special surface treatment to the improve wear resistance & reduce the friction. Pre-balanced collet chucks are supplied in balancing grades G6.3 or G2.5 on request.

Birla Precision offers the largest variety and highest quality standard Collet Chucks.  ER, TG and DA Collet Chucks on BT/DV/CAT & HSK tapers Metric & in Metric & Inch version available. Straight shank extensions are available as well. ER collet chucks guarantee run out accuracy of 0.005 mm or 0.00002” w.r.t.Taper. TG & DA Collet chucks guarantee run out accuracy of 0.008 mm or 0.0003” w.r.t .Taper. ER Lock nuts are supplied with special surface treatment to the improve wear resistance & reduce the friction. Pre-balanced collet chucks are supplied in balancing grades G6.3 or G2.5 on request.

Birla Precision offers a wide range in hydraulic chucks on BT/DV/CAT & HSK tapers. Bore size range- 6 mm to 40 mm & ¼”to 11/2” In Inch sizes Advantages TIR within 5 microns at 4 times the cutting tool diameter. Improved vibration dampening by using a patented silicon compound as the pressuring medium. Improved surface finish and excellent size control for hole. Improves tool life up to 50% Repeatability of 3 microns TIR over 50, 000 cycles. Up to and 20 mm diameter tool with Weldon or whistle notch shank can be clamped without an intermediate sleeve. The integral clamping sleeve is hardened & tempered to reduce chuck wear & give a longer service life. Always supplied in pre-balanced condition at G2.5, at 20, 000 RPM. All chucks are individually tested for accuracy & torque transmission.

Functioning efficiently from Aurangabad-431 133(India), we are known for bringing forth quality products at competitive price. Backed by a well-organized and structured storage unit, we efficiently store the entire array of products in a secured manner. Furthermore, we ensure total security of the products.

Birla Precision offers boring bar blanks on various tapers in Different dia. & in standard gauge lengths. The front end is provided with the hardness in the range of 25 to 30 HRC which provides ease of converting it to Spl Tools.

Birla Precision offers wide range in Shrink Fit adaptors on BT/DV/CAT & HSK tapers. Extra long gauge lengths are available to approach machining deep areas.  Bore size ranging from 6 mm to 32 mm & ¼”to 11/4” In Inch sizes. Advantages TIR within 3 microns at nose. Cutting tool is gripped 360 degree along the entire length of tool shank ensures the even distribution of clamping force. Clamping force is greater than hydraulic chuck or collet chuck. Best suitable for high speed machining because of symmetry & no other assembly parts. Supplied in pre-balanced condition at G2.5, 20, 000 RPM for 40 Taper & 15, 000 RPM for 50 taper

Birla Precision offers the largest variety and highest quality standard Collet Chucks.  ER, TG and DA Collet Chucks on BT/DV/CAT & HSK tapers Metric & in Metric & Inch version available. Straight shank extensions are available as well. ER collet chucks guarantee run out accuracy of 0.005 mm or 0.00002” w.r.t.Taper. TG & DA Collet chucks guarantee run out accuracy of 0.008 mm or 0.0003” w.r.t .Taper. ER Lock nuts are supplied with special surface treatment to the improve wear resistance & reduce the friction. Pre-balanced collet chucks are supplied in balancing grades G6.3 or G2.5 on request.

Birla Precision offers a wide range in hydraulic chucks on BT/DV/CAT & HSK tapers. Bore size range- 6 mm to 40 mm & ¼”to 11/2” In Inch sizes Advantages TIR within 5 microns at 4 times the cutting tool diameter. Improved vibration dampening by using a patented silicon compound as the pressuring medium. Improved surface finish and excellent size control for hole. Improves tool life up to 50% Repeatability of 3 microns TIR over 50, 000 cycles. Up to and 20 mm diameter tool with Weldon or whistle notch shank can be clamped without an intermediate sleeve. The integral clamping sleeve is hardened & tempered to reduce chuck wear & give a longer service life. Always supplied in pre-balanced condition at G2.5, at 20, 000 RPM. All chucks are individually tested for accuracy & torque transmission.

High Precision Fuel Injection System parts: Retainer Shafts, Adaptors, Guides, Covers, Housings. Our Engineering team with thorough experience on application works throughout the project right from Design review up to PAP approval including documentation.