KAM AVIDA ENVIRO ENGINEERS PVT LTD

Kolkata, West Bengal

Non- motorized drain cleaner. Manual outdoor drain cleaner for 4 to 12 Lines. Can be used to clean sewer lines which are not easily accessible. The attached brush dislodges/collects deposited material. The equipment is a nylon rope with brush with manhole guide pipe assembly as an option. The length of the Flexo rigid rod of the retriever is 100 feet and 9 mm diameter. Application : Handheld Outdoor Drain Cleaner

Motorised trolley mounted cable spinner Motorised Outdoor drain cleaner for 4 to 12 Lines. Our equipment can be used to clean outdoor floor drains and pipes. The KAMBORE 's high speed drilling along with force presents the most effective way of removing blockages. Augers, cutters and accessories may be used as per customer 's requiremnts. Some accessories available are Hook Auger, Grease Cutter, Flute Brush, Chain Knocker, Shark Tooth Cutter etc. Application : Motorised Outdoor Drain Cleaner

Motorised Cabling - Cum - Rodding Machine Powered by a 0.5 HP, 220 volts, 50 Hz, single phase reversible induction motor, the trolly mounted cabling cum rodding machine drives the floexo rigid coiled cables and alloy steel rods through a compact, 2 speed, planetary, reduction gear box and a timimg belt and pulley drive configuration. Our equipment is effective in removal of light and heavy, stubborn pipe and drain line blockages in pipe diameters ranging from 4 inches to 24 inches depending on which mode of cleaning the sewer man chooses to use. Our flexible cables or sections of the 8 mm x 1 m long alloy steel sewer cleaning rods make the machine versatile and suitable for both external, internal, light and heavy duty applications. The concept of low speed-high torque drilling is most effective. The standard accessories included are Sand Driller, Flat Auger and Double Cork Screw. A self-powered generator can be optionally attached. Application : Generator Powered Motorised Outdoor Drain Cleaner

Description : Non- motorized hand held drain cleaner. A manual equipment used for cleaning of indoor drains FOR 0.75 to 2.5 Lines. The drive of the CC is manual with a cable size of 9 mm and cable length of 3 feet. Our equipment weights 1.5 kg. The equipment is ideal for cleaning closet with traps. Application : Hand held Non- motorized closet cleaner.

Description : Non- motorized hand held drain cleaner. A manual equipment used for cleaning of indoor drains for 0.75 to 2.5 Lines. The drive of the NM is manual with a cable size of 8 mm and cable length of 25 feet. Our equipment weights 3.5 kg. Our equipments can be used to clean clogged lines leading from lavatory, urinals and tubs/shower drains. The equipment is ideal for lines with traps, bends leading from sinks, tubs, lavatories, urinals etc. Application : Handheld non- motorised cable spinner/pipe cleaner.

Description : A light weight and handheld machine used for 1.25 to 2.00 Lines. The drive of the KAMBORE ST 700 comes from the Drill machine of upto 1.85 amp. Our equipment weighs 2 kg. Our equipment can be used to clean clogged lines leading from lavatory, urinals and tubs/shower drains. The equipment is ideal for lines with traps, bends leading from sinks, tubs, lavatories, urinals etc. The HSN Code of this product is 84.67. Application : Hand held Variable Speed Drain Cleaner

Description : The KAMBORE ST -100 UP cable machine is perfect for clearing out smaller lines. Holding up to 75 ' of cable in a compact, adjustable frame, the KAMBORE ST -100 UP carries the precision and power you expect. You can count on the KAMBORE ST -100 UP to get you out of the tightest spots over and over again. The equipment can be used for 1.25 to 4.00 Lines and weighs 20 kg. The HSN Code of this product is 8479 71 00 & 8479 79 00. Application : Indoor and Floor Drain Cleaning Cabling Machine

Description : A medium-weight machine with heavy-duty power for 3 to 6 " lines weighing 62 kgs. The cable length can be increased up to 200 ' with additional cable length. The Permanent Magnet gear-reduced quiet motor with watertight switch makes machine the quietest in the Industry. The HSN Code of this product is 8479 71 00 & 8479 79 00. Application : High Power Drain Cleaning Cabling Machine

Description : The KAM GRAB is ideal to collect "SEDIMENTAL MATERIAL " at a depth up to 3 meters from the ground. Our machine is able to scrape and collect around 6 litres of solids into its Collection Bucket. Can be used to manually collect silt & other solids from manholes & open nallah 's. Application : Manual Outdoor Drain Cleaner

Description : Our Spartan Tool 2.0 Traveller is a self-contained surveillance system that takes finding and seeing the clog in your pipes and sewerage network to the next level. The CCTV features a removable push rod reel allowing you to quickly & easily swap reels in the field. Application : CCTV Pipe Inspection Camera

Description : Trolly Mounted Jetting drain cleaner for 2 to 6 Indoor Lines. Our trolly mounted jetting unit is capable of de-choking & de-silting civil and industrial drain lines. The Kamjet Mini can also be used as a high-pressure trigger gun with rigid lance for washing hence making it a multi-purpose cleaning device. Application : Trolly Mounted Mini Jetting Machine

Description : Our KAMBI is a truck chassis mounted suction-cum-jetting combination machine available in multiple volumetric capacities of clean water and sludge collection tank. These equipments are capable of efficiently working is sewer lines of diameters ranging from 200-1000 mm. Siphoning the liquid and solid effluents into the equipment 's sludge collection tank under high vacuum, from surcharged manhole chambers, sewer and storm water drain lines, septic/sump tanks and gully pits and transporting the same to any desired disposal site for emptying under gravity/positive pressure/tipping of sludge tank. De-choking and de-silting of the sewer and drain water lines and chambers by high pressure jetting through suitably dimensioned jetting hoses and nozzles aspirating the dislodged effluent and transporting the same to any desired disposal site for emptying under gravity/positive pressure/tipping of sludge tank. Application : Chassis Mounted Suction cum Jetting Machine

Description : A wide range of suitably designed, truck chassis mounted high vacuum suction, jetting and combination machines, capable of effectively working in sewer lines of depth up to 20 mtr and line diameters of up to 2000 mm. Our machine can be used for: Simultaneously/independently de-silting by power jetting and siphoning the silt and debris under high vacuum flow from deep sewer mains upto 20 meters. Transportation of the extracted effluent to any desired disposal site for emptying under gravity/tank tipping. Application : Deep Sewer Suction, Jetting and Combination Machine

Description : Combination of high vacuum - high flow suction - cum jetting combination recycler machines mounted on high powered high GVW rating (equal to or greater than 25 Tonnes ) truck chassis. Our machine can be used for: The equipment power jets, cleans, flushes the silt and debris in the drain lines and siphons the same into its sludge compartment from where the liquid effluent is extracted, recycled through a simple and easy to maintain filtration system and sent back to the jetting pump for further power cleaning use. The KAMBI RECYCLER does not stop its operations for water but continues cleaning until the debris tank is full thus asserting the elimination of the non productive fill cycle time and offers massive productivity gains. Application : Sewer Suction cum Jetting Machine with a Recycler

Description : Our KAMJET is a truck chassis mounted jetting machine available in multiple volumetric capacities of clean wate tank. These equipments are capable of efficiently working is sewer lines of diameters ranging from 200-1000 mm. De-choking and de-silting of the sewer and drain water lines and chambers by high pressure jetting through suitably dimensioned jetting hoses and nozzles aspirating the dislodged effluent and transporting the same to any desired disposal site for emptying under gravity/positive pressure/tipping of sludge tank. Application : Trailer and Chassis Mounted Jetting Machine

Description : Indian first compact yet powerful, hydraulically driven, electro mechanically operated sewer cleaning and maintenance machine, modelled the KAMJET GR is designed for: De-choking of sewer lines through Power Rodding. Flushing and de-silting of sewer lines through High Pressure Water Jetting. Removal of silt and debris from manholes through Mechanical Grabbing. All the above, without any physical contact with sullage/ waste water and man-entry. A suitable truck chassis (Diesel or CNG) of minimum 60 HP and 4.8 Tons Gross Vehicle Weight is selected to provide the minimum required horsepower and payload for the configuration of the machine. The KAMJET GR is under copyright and industrial design certification 10376/2018-CO/L The KAMJET GR is the 2nd Runner Up of the Ministry or Urban Development, India (MOUD) technology challenge AMRUT Tech Challenge 2018.

Description : Our KAMVAC is a truck chassis mounted vacuum loader, gully pit/cesspool emptier available in multiple volumetric capacities of sludge collection tanks and free air displacement ratings of vacuum pumps. Siphoning the liquid and solid effluents into the equipment 's sludge collection tank under high vacuum, from surcharged manhole chambers, sewer and storm water drain lines, septic/sump tanks and gully pits and transporting the same to any desired disposal site for emptying under gravity/positive pressure/tipping of sludge tank. Application : Trailer and Chassis Mounted Suction Machine

KAMVAC / KAMBI HI FLOW BB On MCV, HCV Application : Sewer suction cum jetting machine with Blow Back option.

Description : Our KAMSCOOP machine after being parked parallely to open nallahs / drains can excavate silt and floating bodies up to an arm radius of 3.6 meters. Our machine is ideally suited for operating in towns & cities with ease for medium and large sized open drains. The excavated silt can be unloaded at the rear end, keeping the front side free. Application : Open Nallah Desilting Machine on Mahindra PICK UP.

Description : The KAMVAC 1 LT 1.5 PTO is a 1000 litre capacity trailer mounted suction unit capable of creating vacuum for sucking out dense waste, sludge like mud, slurry, etc. from septic tanks, sewer lines, storm water drains, gullies etc. The equipment is mounted on an RTO approved single axle trailer with a wide wheel base and a low center of gravity to ensure optimum road stability in dynamic conditions. The high performance exhauster, compressor ensure the machine can be operated in both vacuum and pressure mode. Blowing pressurized air or water into the chamber dislodges the sediment solids and combines with the liquid effluent to form sludge. This sludge is then collected into the tank by operating the system in vacuum mode. Application : Tiller Mounted Mounted Suction Machine

Description : The KAMBI MINI RECYCLER is a compact hydraulically driven recycling machine that can turn at a radius of 7 meters making it easy to steer into narrow gullies of India. The machine can operate in 3 modes namely Suction mode, Jetting mode, Recycling mode. The machine 's tank has been made from corrosion-free stainless steel and has a cylindrical capacity of 3000 liters out of which 2800 liters are reserved for sludge and 200 liters for freshwater. The recycler 's blower can displace air at 1000 cum/hr which helps it siphon sludge up to 7 meters in sewers. Its boom arm is hydraulically operated and can extend up to 60 mm to reach the furthest corner with ease. Its filtration system is 200 LPM output and three-stage filtration systems are capable of filtering sewage water up to 50 microns. Application : Chassis Mounted Suction cum Jetting Machines with Recycling

KAM SHRAVAN has been designed as an Emergency Sanitation Response Unit (ESRU) Vehicle and has been developed with the primary objective of protecting the life of the Safai Karamcharis. KAM SHRAVAN is equipped with all tools and equipment required under mechanized cleaning as per The Prohibition of Employment as Manual Scavengers and their Rehabilitation Act, 2013 such as a gas detector, blower, wash down system, safety torch, and other personal protective equipment. The machine is designed to provide emergency onsite medical assistance as it is equipped with a breathing mask, basket stretcher, and more, to provide immediate onsite medical support in case of work accidents. It can be fitted on any chassis with min output of 90 HP or above. Application : Chassis Mounted Emergency Sanitization Vehicle.

Kamjet RGI is India 's first chassis mounted sewer jetting machine with waste water recycling facility, a grab for machine hole desilting & CCTV Inspection. Brought to you jointly by CSIR - CMERI (Central Mechanical Engineering Research Institute) & Kam Avida Enviro Engineers Pvt. Ltd. It is capable of cleaning, de-choking, de-silting drains and sewer lines by using re-cycled waste water. Application : Jetting, Grabbing, CCTV Inspection.

KAM MTU is India 's first Chassis mounted Mobile Faecal Sludge Treatment Unit. MTU attempts to address several barriers to achieving safely managed septic waste and is designed in such a way that it is replicable across geography. The higher flow rate of MTU helps in emptying & treating more number of septic tanks per day, bringing down the operational cost of the truck, especially its fuel cost, maximizing the profit. Treatment system mounted on a small/medium truck. Designed to treat contents of septic tank at the household/site itself. Separates solids and liquids, liquid gets treated on the spot, thickened sludge carried for further treatment. Operational capacity is 6000 litres per hour. Application : KAM MTU (Mobile Septage Treatment Unit)

Our KAMSCOOP TBCT is ideally suited for operating in cities and towns having a drainage network of medium and large sized open drains. Capable of removing silt and solid materials from open, dry or flowing open drains the KAMSCOOP TBCT is available in 3 variants of outreach, thereby allowing operations and open drains and canals of width and depth of 6 meters. Removal of silt and debris is done by a folding type loading crane unit mounted between the truck 's cabin and tipper load body, using a hydraulically operated and extended boom arrangement. Application : Tipper Body Crane Truck mounted mobile, open drain de-silting eqipment.

M/s Menzi Muck, Switzerland - world renowned manufacturers of Mobile All Terrain Excavators together with Kam-Avida, bring to you the Kam-Mate in models of varying capacities and attachments. We are delighted to present to you an engineering marvel that will start work where a conventional excavator, back hoe loader will fail to even reach. Our Kam-Mate may be used for the below applications : De-silting of inaccessible Open Nallahs and Drains Dredging of Canals & Shallow Water Bodies River Bank Reinforcement Stream and Canal Restoration Land Slide Restoration and Protection Disaster Management Border Road Construction Maintenance of Assets that are along the Railway Track but are difficult to access. De-silting of Open Nallahs and Drains along the Tracks. Maintenance of Fixtures and Bridges along the Tracks. Reaching a point of mishap during Rescue Operations.

The KAMSCOOP is a tractor towed, compact, mobile, drain de-silting eqipment, ideally suited for operating on both main roads and narrow restricted lanes of large/medium sized cities and smaller towns. Our machine is able to de-siltopen drains and strong water canals of a maximum width of 1.5 meters and depth 1.2 meters, using a hydraulically operated bucket and boom arrangement. The scooped out silt and debris can be off loaded into an open skip, a waiting dumper truck or it 's self contained dumper trailer itself. Application : Open Nallah Desilting Machine on a tractor towed trailer

Description : Performing an important role as a short haul element in the Municipal Solid Waste Management of an Urban Local Body, the KAMPAC Rear End Loading compactor is deployed for collection and transportation of garbage. The KAMPAC REL is available in varying capacities with a universal bin lifter mounted on 16 ton &25 ton GVW chassis resp. Our KAMPAC REL UBL is fitted with a push button unit with a complete safety cage that aids in the lifting and emptying of wheelie bins into dumper bins(UBL). Application : Real End Loading Compactor with Universal Bin Lifter

Performing an important role as a short haul element in the Municipal Solid Waste Management of an Urban Local Body, the KAMPAC Rear End Loading compactor is deployed for collection and transportation of garbage. The KAMPAC REL DP is available in varying capacities with a dumper placer arm mounted on 16 ton & 25 ton GVW chassis resp. Our KAMPAC REL DP is fitted with hydraulically operated arms and lifting mechanism designed for lifting and transportation. Application : Real End Loading Compactor with Dumper Placer Arms

Our dismountable Integral Static Compactor and container houses a very large charge box which can be customised as per the customer 's requirement. It is stand-alone unit and is ideal for use in areas such as Railway stations, bus stands, market yards, Shopping malls, retail markets and other places that generate large quantities of Municipal waste. As stipulated in SWM 2000 rules, the whole unit is closed and once filled to its capacity, it can be transported with the help of a specially designed skip loader/dumper placer/HLE unit mounted on suitable GVW rated truck chassis. Application : Dismountable Integral Static Compactor

The Kampac REL series standard model when additionally fitted the hydraulically operated universal bin lifting arms with comb, dumper placer arms and a combination of both is offered as UBL, DP and UBL : DP models The equipment has versatile capabilities and is effective and economical in the collection and disposal of: Kitchen, domestic and commercial waste. Market waste. Hotel, restaurants and canteen waste. Dry and recyclable waste generated in metropolitan cities and towns. Application : Real End Loading Compactor with Universal Bin Lifter and Dumper Placer

The KAMPAC SEL is available in varying capacities with a universal bin lifter mounted on 16 ton & 25 ton GVW chassis resp. Our KAMPAC SEL UBL is fitted with a push button unit with a complete safety cage that aids in the lifting and emptying of wheelie bins into dumper bins(UBL) Application : Side End Loading Compactor with Universal Bin Lifter

Process plants handle and transport various types of raw bulk material and finished goods through conveyer belts, bucket elevators, trucks and transfer stations. Spillage of bulk material and dust explosion is common, exposing the plant, shop floor and machinery to fine dust particles. This material can be recovered and pumped back with the help of our IVC machine and its special Back to Process attachment, arresting a considerable monetary loss. Application : Chassis mounted Industrial Vacuum Cleaner with Back to Process System

Dust and debris if not controlled, deteriorate the life, aesthetic appearance and property value of Plants and Assets. The KAMVAC IVC can be used to efficiently clean various industries and process plants as well as ensure cleaning compliance. Our Chassis mounted industrial vacuum cleaners of varying tank and pump capacity work in some of the below industries: Cement Steel Coal Power Mining Refineries Fitted with our sweeper attachment, the KAMVAC IVC can ensure consistent sweeping quality, speed, efficiency and productivity

Chassis mounted industrial vacuum cleaners of varying tank and pump capacity. Application : Mobile Vacuum Loader for Volatile and Non Volatile Hydrocarbons

ATEX is the name commonly given to the European Directives for controlling explosive atmospheres on minimum requirements for improving the health and safety protection of workers potentially at risk from explosive atmospheres. The KAMVAC IVC can be used to efficiently clean various industries and process plants handling fire hazardous materials. Our Chassis mounted industrial vacuum cleaners of varying tank and pump capacity along with anti-static reels and ATEX certified controls can safely work in explosive environments with ease. Application : Chassis mounted Mobile Industrial Vacuum Cleaner with ATEX compliance.

Ideally positioned for use in small municipalities, Nagar Palikas and Parishads. The equipment efficiently cleans narrow congested roads, large parking lots, open grounds, markets and open areas. The KAMSWEEP 3AT draws power from the tractor 's hydraulic system. Application : Tractor attached sweeper

Our Chassis Mounted Vacuum-assisted Mechanical Sweeper is powered by a minimum 150 HP Diesel engine. It is an all Hydraulic driven sweeper that is capable of working in wet and dry road conditions without any changeover. The KAMSWEEP 500 / 650 C is equipped with pleated filter bags and an automatic pulse jetting bag cleaning system. It is mainly used for commercial applications like the sweeping of Roads, Highways, Vehicle parking areas, Industrial shop floors, etc. Application : Chassis Mounted Vacuum-assisted Mechanical Sweeper (Wet and Dry)

A time tested Tree Transplanting equipment, manufactured by M/s Big John, United States of America, with over 500 nos working world wide. Our Transplanter may be used for the below applications : Land Development. Road Construction. Green Field Projects. Plant/ Factory Expansion. Application : Chassis Mounted Tree Tranplanting Equipment

Our KAM FOGGER machine, mounted on a 16 ton GVW chassis contains a tank for storage of water, a canon for sprinkling water and a platform to operate the same from.rnrnThe canon contains a number of nozzles through which water gets continuously sprayed under high pressure.rnrnThe main objective of the KAM FOGGER is to drop down the harmful PM 2.5 particles in the air, dust and all other harmful particulate matter in air to the ground and keeps air-environment clean.rnrnOur machine is fitted with a Fog Cannon, also known as a Dust Suppression System or Dust Fighter. These cannons consist of a high power turbine ventilator which sprays a light rain to a minimum distance in a range of 30 to 120 meters.rnrnThese cannons can be rotated horizontally by 360 degrees and their pitch angle can be adjusted from -10 to 45.rnrnrnApplication :rnTruck Chassis Mounted Fogging Canon Equipment

KAMPICK is a contactless hassle-free litter collection solution performing in wet and dry conditions. KAMPICK is powered by a 25 horsepower engine with a high-capacity suction blower with conveying velocity of 35 mega transfers per second at the minimum fuel consumption capacity. The machine is available in varying capacities in hooper from 1000 Litres, 1750 Litres and 3000 litres as per your requirement. It has an integrated boom arm to ensure the rotation of 270 degrees with an 8-inch collection hose. The KAMPICK can be fitted on any chassis in the segment as per customers desire payload capacity. Application : Chassis Mounted litter picking machine

Meet the e-Kamsweep, the first fully electric street sweeper. The Boschung S2.0 electric sweeper combines ease and suction power with the most progressive technologies of today. Street-smart, intuitive and compact, the S2.0 sweeper was engineered and designed for maximum performance. The intelligent and innovative battery at the heart of the sweeper will grant you an entire work shift with just a 100 minutes of charging time. Application : The first fully electric street sweeper.