RAY-3 data logger is dedicated for measuring of analog (voltage, current, resistance) parameters, for tracking the status of discrete inputs, formation of discrete output signals, archiving and sending data to local users/server over RS232/RS485 or USB and to remote users/server over Ethernet or/and GSM/GPRS/EDGE or UMTS/HSPA+ using Modbus TCP/IP protocol.

Technical Features :

• Possibility to choose interfaces: M-Bus, RS232, RS485, USB, GSM/GPRS, Ethernet, Analog IN/OUT, Discrete IN/OUT
• Supported protocols: Modbus RTU, Modbus TCP/IP, M-Bus, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:200 DynDNS, FTP server, FTP client, DNS client and transparent
• Independent data log with real time stamp (Real Time Clock)
• Alarm limits tracing of analog and discrete inputs, logging in event archive, warning about alarms over GSM/GPRS/EDGE or UMTS/HSPA+, Ethernet and by sending SMS
• Reading data from M-bus meters (heat, water, gas, electricity.) via M-Bus interface
• Alarms status of analog and discrete channels fixing
• Data from local device reading over RS232/RS485 (using Modbus RTU protocol) or USB 
• Remote communication over Ethernet or GPRS/GSM / 3G
• Up to 6 analog inputs (voltage, current, resistance, PT100)
• Up to 2 analog outputs
• Up to 4 discrete inputs (contact / impulse / alarm)
• Up to 2 discrete relay outputs
• Galvanically isolated interfaces and power supply
• Additional special transparent protocol data transfer
• Internal battery ensure at least 1 hour operation, after power fail

http://www.viltrus.com/data-logger-ray-3/

Features

• Multi Serial interfaces
• Support 1x TCP Server / 1x TCP Client / UDP / Virtual COM / Paring
• Powerful Cortex M4 CPU
• Built in 15KV ESD protection for all signals
• Web Browser configuration
• Easy installation Windows utility

Specifications

System

• CPU : 32-bit ARM-Cortex-M4 CPU , 120 MHz
• RAM : 128K bytes SDRAM
• ROM : 512K bytes Flash ROM
• Watchdog : Built in H/W Watchdog timer 

Ethernet

• Port number : 1
• Port Type : RJ-45 Connector
• Speed : 10 / 100 Mbps ( Auto Detect )
• Protocol : ARP, IP, ICMP, UDP, TCP, HTTP, DHCP
• Mode : 1x TCP Server / 1x TCP Client / UDP / Virtual COM / Paring
• Setup : HTTP Browser Setup (IE, Chrome, Firefox)
• Security : Login Password
• Protection : Built-in 1.5KV Magnetic Isolation

Serial Interface

• Port number : 2
• Port Type : RS-232 x 1 Port ( DB9 ) ,
• RS-422/485 x 1 Port (Auto Detect)
• Connector : Male DB9 / 7-pin Terminal Block
• Speed : 300 bps 115.2 Kbps
• Parity : None , Odd , Even , Mark , Space
• Data Bit : 5, 6 , 7 , 8
• Stop Bit : 1 , 2
• Port 1 RS-232 : Rx , Tx , GND , RTS , CTS
• Port 2 RS-422 : Rx+ , Rx- , Tx+ , Tx-
• RS-485 : Data+ , Data-
• Built–in : RS-422/485 pull high / low Resistor
• Protection : 422/485 Surge & Over Current Protection
• Built in 15KV ESD protection for all signals

LED   SYS (PWR), DI/DO, Port-2, Port-1

Regulatory Approval

• FCC Part15 Class A
• CE EN55022 Class A, EN55024
• RoHS Compliance

Environment

• Temperature : Operating: -10°C 65°C (14°F 149°F)
• Storage: -20°C 70°C (-4°F 158°F)
• Humidity : Operating: 10% 95% non-condensing
• Storage: 5% 95% non-condensing

Software Features

• OS Supported : Windows 2000/2003/XP/Vista/Win 7/Win 8
• Configuration : Window Utility, Web Browser

Power

• Input: DC 9 24V, 300mA@ 12VDC
• Consumption < 4W

Warranty 1 Year

Features :

• Plug & Play installation
• Built in 15KV ESD protection for signals
• RS-422/485 surge protection
• Built in 100 ohm Termination resistor
• LED indicator for transmission status

Specifications

Serial Interface

• Port number : 1
• Port Type : 1x RS-232 Port (DB9)  to 1x RS-422/485 Port (4-pin Terminal Block)
• Connector : Male DB9 / 4-pin Terminal Block
• Speed : 300 bps 230.4 Kbps
• Parity : None , Odd , Even , Mark , Space
• Data Bit : 5, 6 , 7 , 8
• Stop Bit : 1 , 2
• RS-232 : Rx , Tx , GND 
• (RTS & CTS is shorted, DTR, DSR & DCD are shorted)
• RS-422 : Rx+ , Rx- , Tx+ , Tx-
• RS-485 : Data+ , Data-
• Built–in : RS-422/485 pull high / low Resistor
• Protection : 422/485 Surge Protection
• Built in 15KV ESD protection for all signals
• Termination Resistor built in 100 Ohm Termination resistor switch On/Off
• Distance : Up to 1250 Meters.

Power Supply

• Input: DC 5V, 20mA@ 12VDC
• Mode: DC jack adapter
• Wrong polarity input protection

LED  Rx, Tx

Regulatory Approval

• FCC Part15 Class A
• CE EN55022 Class A, EN55024
• RoHS Compliance

Environment

• Temperature : Operating: 0°C 65°C (32°F 149°F)
• Storage: -20°C 70°C (-4°F 158°F)
• Humidity : Operating: 10% 95% non-condensing
• Storage: 5% 95% non-condensing

Dimension & Weight

• Dimension 55 x 40 x 25 mm
• Weight 35g

Warranty 1 Year

PROFIBUS-DP/FMS/FIP, 1 Pair, Copper Braided and Foil Screened, Polyvinyl chloride (PVC) outer sheath colour Violet for Bus Systems, fixed installation, indoor use, conductor size of 0.64 mm ø, 250 V (Not for power application), 8mm OD, Flame Retardant to IEC 60332-1-2, Approvals: Fire protection, ULC.

Product Description

Application Range

• For fixed installationMaximum electromagnetic screening
• Dry or damp rooms
• Item nos. 2170233, 2170333, 2170820, 2170824, 2170826 are all UV-resistant

Norm References / Approvals

• In accordance with DIN 19245 and EN 50170, e.g. for SIEMENS SIMATIC NET, also suitable for FIP (Factory Instrumentation Protocol)
• See below for UL certification type

Product Make-Up

• FC: Fast Connect cable design
• 7-W: 7-wire, e.g. for applications where vibrations occur
• PE: polyethylene outer sheath, black
• P: PolyurethaneH: Halogen-free 
• COMBI: Data transmission andpower supply in one cable

Product Features

• These bus cables can be used for PROFIBUS-DP as well as for PROFIBUS-FMS and FIP
• Based on the bit rates listed, in accordance with PNO specifications the following maximum cable lengths for a bus segment apply(cable type A, PROFIBUS-DP):93.75 kbit/s = 1200 m187.5 kbit/s = 1000 m500 kbit/s = 400 m1.5 Mbit/s = 200 m12.0 Mbit/s = 100 m

Technical Data

Minimum Bending Radius

• Fixed installation: see data sheet

Test Voltage

• Core/core: 1500 V rms

Peak Operating Voltage

• (not for power applications) 250 V

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000830
• ETIM 5.0 Class-Description: Data cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000830
• ETIM 6.0 Class-Description: Data cable

LI30-20B24PR2 -DIN rail power supply; Output 24Vdc at 1.5A; 36 Watt , metal case.

NP301 is the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. The product supports 1 RS-232/RS-422 /RS-485 to 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes.

Serial device server supports multiple network protocols, such as TCP, UDP, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server, Advanced UDP operating modes and AT, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features and Benefits :

• Adopt 32 bits ARM processor
• Support 10/100Base-T(X) self-adaptive Ethernet interface
• Support AUTO MDI/MDIX, which can be connected via crossover cable and straight-through cable
• Support 300bps-115200bps line speed and non-blocking communication
• Support low power consumption mode and high performance mode
• Support TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server and Advanced UDP operating mode
• Support AT command, which is convenient for the secondary development of users
• Support DNS, which can achieve communication via domain name
• Support across gateway and routing communication
• Support virtual serial port drive access mode and automatic connection recovery after network interruption
• Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
• Support standard TCP/IP SOCKET application access
• TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously
• UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously
• Support Windows configuration tool, serial port, WEB and other configuration forms
• Support local and remote system firmware upgrading

USB232/485/422 is a USB to RS-232/485/422 interface converter, which can achieve bidirectional data conversion between USB interface and RS-232/485/422 serial ports. The product supports 1 USB interface and 1 RS-232/485/422 serial port. RS-485/422 supports serial port self-adaption technology, which can identify RS-485/RS-422 serial port with no need of switch setting. Serial port is equipped with 8kV electrostatic protection and 2kV isolation protection, which can effectively protect the device from damage. It adopts wall mounting to meet the requirements of different application fields.

The product provides matched driver program software; USB interface connected to PC will make up a serial COM port in the computer system automatically. PC host can communicate with RS-232/485/422 serial devices via virtual COM port.

Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC, Industrial Automatic Control, IC Card Toll Collection System, and Data Acquisition Control System, etc.

NP304T series are the serial device servers that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This series include 3 types of products and provide 4 RS-232, RS-485/422 or 3IN1 serial port to 1 100M Ethernet copper port. Thereinto, RS-485/422 supports electromagnetic isolation of serial port. It adopts wall/desktop mounting to meet the requirements of different application scenes.

Serial device server supports multiple network protocols, such as TCP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast operating modes and TELNET, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

DIP switch can achieve restore factory defaults of the device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features and Benefits :

• Support 10/100Base-T(X) self-adaptive Ethernet interface
• Support 300bps-115200bps line speed and non-blocking communication
• Support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast and other operating modes
• Support across gateway and routing communication
• Support multiple hosts polling mode, which allows multiple hosts to access the same serial port
• Support delimiter matching communication, achieving various demands for serial port packaging
• Support FIFO, compatible with various old type terminal devices
• Support IP address and MAC address filtering, which can easily achieve accurate access control
• Support classification of user management to realize humanized permission management
• Support serial port status and parameters monitoring, ensuring the communication status be clear at a glance
• Support RTS/CTS, DTR/DSR and XON/XOFF flow control
• Compatible with various virtual serial port management software
• Support virtual serial port drive access mode and automatic connection recovery after network interruption
• Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
• Support standard TCP/IP SOCKET application access
• TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously
• UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously
• Support Windows configuration tool, TELNET, WEB and other configuration forms

NP3016T series are the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This series include 4 types of products; provide 16 RS-232/485/422/3IN1 serial port to 1 100M Ethernet copper port and support single or dual Ethernet port. It adopts rack mounting to meet the requirements of different application scenes.

Serial device server supports multiple network protocols, such as TCP, UDP, SNMP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast operating modes and TELNET, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

DIP switch can achieve restore factory defaults of the device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features and Benefits :

• Support 10/100Base-T(X) self-adaptive Ethernet interfaces
• Support 300bps-115200bps line speed and non-blocking communication
• Support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast and other operating modes
• Support across gateway and routing communication
• Support multiple hosts polling mode, which allows multiple hosts to access the same serial port
• Support delimiter matching communication, achieving various demands for serial port packaging
• Support FIFO, compatible with various old type terminal devices
• Support IP address and MAC address filtering, which can easily achieve accurate access control
• Support classification of user management to realize humanized permission management
• Support serial port status and parameters monitoring, ensuring the communication status be clear at a glance
• Support RTS/CTS, DTR/DSR and XON/XOFF flow control
• Support SNMP network management
• Compatible with various virtual serial port management software
• Support virtual serial port drive access mode and automatic connection recovery after network interruption
• Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
• Support standard TCP/IP SOCKET application access
• TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously
• UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously
• Support Windows configuration tool, TELNET, WEB and other configuration forms

12 port fully loaded liu_lc_multi mode_din rail_om-2

6 Port Fully Loaded LIU_LC_Multi Mode_DIN RAIL_OM-2

6 Port Fully Loaded LIU_SC_Single Mode_DIN RAIL

Standard Industrial Modbus TCP/RTU/ASCII Network Integration

PLANET has added the Industrial Modbus TCP/IP Protocol to its easily-integrated industrial management level products that come with SCADA/HMI system and other data acquisition systems on factory floors. Moreover, the industrial IT SNMP network is upgraded to the Industrial automation Modbus TCP/IP network. PLANET industrial management level products with the Modbus TCP/IP Protocol offer flexible network connectivity solutions for the industrial automation environment.

To complete the industrial automation environment application solution, PLANET has announced a first industrial level 1-port RS232/422/485 Modbus Gateway, IMG-2100T, a bridge that converts between Modbus TCP/IP Protocol and Modbus RTU/ASCII Protocol. It features a wide operating temperature range from -40 to 75 degrees C and a compact but rugged IP30 metal housing.

Features

Serial Interface

• One DB9 interface that supports RS232
• One terminal block interface that supports 2-wire RS485 and 4-wire RS422/RS485 operation
• Asynchronous serial data rates up to 921600bps

Ethernet Interface

• 1-port 10/100BASE-TX RJ45 interface with auto MDI/MDI-X function

Management Function

• Built-in IP-based Web interface and telnet interface for remote management
• Software Protocol supports Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS
• Supports RTU Master, RTU Slave, ASCII Master, and ASCII Slave four serial operation modes via management interface
• Master mode supports 32 TCP slave connection requests
• Slave mode supports 32 TCP master connections
• PLANET Modbus Gateway utility for finding client device on the network
• PLANET Smart Discovery utility automatically finds the client devices on the network
• Firmware upgrade/configuration backup and restore via HTTP protocol

Industrial Case and Installation

• IP30 metal case
• DIN-rail and wall-mount designs
• Redundant power design

- 9 to 48V DC / 24V AC, redundant power with reverse polarity protection

• Supports 6000 VDC Ethernet ESD protection
• Free fall, shock-proof and vibration-proof for industries
• Supports extensive LED indicators for network diagnosis

-40 to 75 degrees C operating temperature 

• Reset button for resetting to factory default

Cost-effective Solutions of RS-232 / RS-422 / RS-485 for Industrial Ethernet Applications

PLANET ICS-2100 Smart Media Converter / Device Server series offers conversion of serial RS-232 / RS-422 / RS-485 communication to Industrial Fast Ethernet networking. It allows serial and Ethernet communications to connect efficiently and inexpensively. The ICS-2100 is a time-saving and cost-effective solution for users and SIs to quickly transform its serial equipment to the Ethernet network with no need of replacing the existing serial equipment and software system.

Remote Manageable

The ICS-2100 makes the connected serial equipment become the IP-based facilities and able to connect to a TCP/IP networking immediately. It also provides Web Management Interface for efficient network management. The powerful Web-Smart Media Converter supports application mode and serial operation mode for alarm or IP address connection, which helps reduce a network administrator’s time by detecting and locating network problems without requiring visual inspection of cabling and equipment. Multiple connection options are available for large networking environment as well.

Stable Performance under Difficult Environments

• The ICS-2100 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Its operating temperature range from -10 to 60 degrees C allows the ICS-2100 to be placed in almost any difficult environment.
• The ICS-2100 is equipped with the compact, IP30 standard metal case that allows either DIN rail or wall mounting for efficient use of cabinet space. The ICS-2100 also provides an integrated power supply source with wide range of voltages (12 to 48V DC) ideally suitable for worldwide operation with high availability applications requiring dual or backup power inputs.

https://www.planet.com.tw/en/product/ics-2100

NP314T series are the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This series include 2 types of products and provide 4 RS-485/422 or 3IN1 serial port to 2 100M Ethernet copper port. Thereinto, RS-485/422 supports electromagnetic isolation of serial port. It adopts wall/desktop mounting to meet the requirements of different application scenes.

Serial device server supports multiple network protocols, such as TCP, UDP, SNMP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast operating modes and TELNET, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

DIP switch can achieve restore factory defaults of the device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features and Benefits :

• Support 2 10/100Base-T(X) self-adaptive Ethernet interfaces, which provide double IP and MAC addresses to meet the requirements of network management or backup
• Support 300bps-115200bps line speed and non-blocking communication
• Support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast and other operating modes
• Support across gateway and routing communication
• Support multiple hosts polling mode, which allows multiple hosts to access the same serial port
• Support delimiter matching communication, achieving various demands for serial port packaging
• Support FIFO, compatible with various old type terminal devices
• Support IP address and MAC address filtering, which can easily achieve accurate access control
• Support classification of user management to realize humanized permission management
• Support serial port status and parameters monitoring, ensuring the communication status be clear at a glance
• Support RTS/CTS, DTR/DSR and XON/XOFF flow control
• Support SNMP network management
• Compatible with various virtual serial port management software
• Support virtual serial port drive access mode and automatic connection recovery after network interruption
• Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
• Support standard TCP/IP SOCKET application access
• TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously
• UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously
• Support Windows configuration tool, TELNET, WEB and other configuration forms

The Bausch DinBox PSTN 485 SIA modem was specifically designed to meet the stringent requirements for the Medical Services and Electricity Metering Industry, as well as for alarm equipments. The embedded SM_H2 socket Modem with 3kV isolation is based on the well-proven Conexant (Harley 2) technology. Especially for alarm equipments the modem supports the SIA & Contact ID protocol. The DinBox PSTN 485 SIA) is a professional V.92 56K modem designed in a robust 22.5 mm wide DIN-rail housing with a wide range DC power supply (10-40 Vdc). Stable operation is guaranteed by the long term watchdog that monitors and automatically resets the modem in case of malfunction. The modem has a RS-232 and RS-485 2 and 4-wire interface. For security reasons it supports selective Caller ID answering with disabled automatic answering (ATS0=0). Firmware adaptations according to your specifications are possible on demand.

Features :

• SIA & Contact ID Alarm Transmitter
• Industrial DINrail housing
• PSTN V.92 modem
• Wide range DC power supply (10-40Vdc) with Watchdog circuit
• RS-232 serial interface
• RS-485 (2-4 wire) serial interface
• Secured: Caller ID detect and answering
• Distinctive ring detect

Applications :

• Alarm equipments
• Remote reading of utility meters
• Medical applications
• Micro RTU applications
• Vending machine monitoring
• Remote control
• Security alarms
• Measurement instruments
• Surveillance systems
• Point of Sales

Extenseur d'Ethernet liaison point à point Plug & Play:

( 1 port SHDSL, LAN : 1 Eth)

Boitier métallique IP20 avec fixation Rail DIN

1 port SHDSL pour connection point à point

Connexion LAN : 1 port Ethernet

Installation « Plug & Play » (configuration par serveur HTML possible)

Autonegociation

De 192Kb/s à 15Mb/s pour une paire

T° d’utilisation : -20°C/+70°C

Qualité de Service Diffserv

VLAN

Une entrée d’alimentation

RAY-3 data logger is dedicated for measuring of analog (voltage, current, resistance) parameters, for tracking the status of discrete inputs, formation of discrete output signals, archiving and sending data to local users/server over RS232/RS485 or USB and to remote users/server over Ethernet or/and GSM/GPRS/EDGE or UMTS/HSPA+ using Modbus TCP/IP protocol.

Technical Features :

• Possibility to choose interfaces: M-Bus, RS232, RS485, USB, GSM/GPRS, Ethernet, Analog IN/OUT, Discrete IN/OUT
• Supported protocols: Modbus RTU, Modbus TCP/IP, M-Bus, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:200 DynDNS, FTP server, FTP client, DNS client and transparent
• Independent data log with real time stamp (Real Time Clock)
• Alarm limits tracing of analog and discrete inputs, logging in event archive, warning about alarms over GSM/GPRS/EDGE or UMTS/HSPA+, Ethernet and by sending SMS
• Reading data from M-bus meters (heat, water, gas, electricity.) via M-Bus interface
• Alarms status of analog and discrete channels fixing
• Data from local device reading over RS232/RS485 (using Modbus RTU protocol) or USB 
• Remote communication over Ethernet or GPRS/GSM / 3G
• Up to 6 analog inputs (voltage, current, resistance, PT100)
• Up to 2 analog outputs
• Up to 4 discrete inputs (contact / impulse / alarm)
• Up to 2 discrete relay outputs
• Galvanically isolated interfaces and power supply
• Additional special transparent protocol data transfer
• Internal battery ensure at least 1 hour operation, after power fail

http://www.viltrus.com/data-logger-ray-3/

Features

• Multi Serial interfaces
• Support 1x TCP Server / 1x TCP Client / UDP / Virtual COM / Paring
• Powerful Cortex M4 CPU
• Built in 15KV ESD protection for all signals
• Web Browser configuration
• Easy installation Windows utility

Specifications

System

• CPU : 32-bit ARM-Cortex-M4 CPU , 120 MHz
• RAM : 128K bytes SDRAM
• ROM : 512K bytes Flash ROM
• Watchdog : Built in H/W Watchdog timer 

Ethernet

• Port number : 1
• Port Type : RJ-45 Connector
• Speed : 10 / 100 Mbps ( Auto Detect )
• Protocol : ARP, IP, ICMP, UDP, TCP, HTTP, DHCP
• Mode : 1x TCP Server / 1x TCP Client / UDP / Virtual COM / Paring
• Setup : HTTP Browser Setup (IE, Chrome, Firefox)
• Security : Login Password
• Protection : Built-in 1.5KV Magnetic Isolation

Serial Interface

• Port number : 2
• Port Type : RS-232 x 1 Port ( DB9 ) ,
• RS-422/485 x 1 Port (Auto Detect)
• Connector : Male DB9 / 7-pin Terminal Block
• Speed : 300 bps 115.2 Kbps
• Parity : None , Odd , Even , Mark , Space
• Data Bit : 5, 6 , 7 , 8
• Stop Bit : 1 , 2
• Port 1 RS-232 : Rx , Tx , GND , RTS , CTS
• Port 2 RS-422 : Rx+ , Rx- , Tx+ , Tx-
• RS-485 : Data+ , Data-
• Built–in : RS-422/485 pull high / low Resistor
• Protection : 422/485 Surge & Over Current Protection
• Built in 15KV ESD protection for all signals

LED   SYS (PWR), DI/DO, Port-2, Port-1

Regulatory Approval

• FCC Part15 Class A
• CE EN55022 Class A, EN55024
• RoHS Compliance

Environment

• Temperature : Operating: -10°C 65°C (14°F 149°F)
• Storage: -20°C 70°C (-4°F 158°F)
• Humidity : Operating: 10% 95% non-condensing
• Storage: 5% 95% non-condensing

Software Features

• OS Supported : Windows 2000/2003/XP/Vista/Win 7/Win 8
• Configuration : Window Utility, Web Browser

Power

• Input: DC 9 24V, 300mA@ 12VDC
• Consumption < 4W

Warranty 1 Year

Features :

• Plug & Play installation
• Built in 15KV ESD protection for signals
• RS-422/485 surge protection
• Built in 100 ohm Termination resistor
• LED indicator for transmission status

Specifications

Serial Interface

• Port number : 1
• Port Type : 1x RS-232 Port (DB9)  to 1x RS-422/485 Port (4-pin Terminal Block)
• Connector : Male DB9 / 4-pin Terminal Block
• Speed : 300 bps 230.4 Kbps
• Parity : None , Odd , Even , Mark , Space
• Data Bit : 5, 6 , 7 , 8
• Stop Bit : 1 , 2
• RS-232 : Rx , Tx , GND 
• (RTS & CTS is shorted, DTR, DSR & DCD are shorted)
• RS-422 : Rx+ , Rx- , Tx+ , Tx-
• RS-485 : Data+ , Data-
• Built–in : RS-422/485 pull high / low Resistor
• Protection : 422/485 Surge Protection
• Built in 15KV ESD protection for all signals
• Termination Resistor built in 100 Ohm Termination resistor switch On/Off
• Distance : Up to 1250 Meters.

Power Supply

• Input: DC 5V, 20mA@ 12VDC
• Mode: DC jack adapter
• Wrong polarity input protection

LED  Rx, Tx

Regulatory Approval

• FCC Part15 Class A
• CE EN55022 Class A, EN55024
• RoHS Compliance

Environment

• Temperature : Operating: 0°C 65°C (32°F 149°F)
• Storage: -20°C 70°C (-4°F 158°F)
• Humidity : Operating: 10% 95% non-condensing
• Storage: 5% 95% non-condensing

Dimension & Weight

• Dimension 55 x 40 x 25 mm
• Weight 35g

Warranty 1 Year

PROFIBUS-DP/FMS/FIP, 1 Pair, Copper Braided and Foil Screened, Polyvinyl chloride (PVC) outer sheath colour Violet for Bus Systems, fixed installation, indoor use, conductor size of 0.64 mm ø, 250 V (Not for power application), 8mm OD, Flame Retardant to IEC 60332-1-2, Approvals: Fire protection, ULC.

Product Description

Application Range

• For fixed installationMaximum electromagnetic screening
• Dry or damp rooms
• Item nos. 2170233, 2170333, 2170820, 2170824, 2170826 are all UV-resistant

Norm References / Approvals

• In accordance with DIN 19245 and EN 50170, e.g. for SIEMENS SIMATIC NET, also suitable for FIP (Factory Instrumentation Protocol)
• See below for UL certification type

Product Make-Up

• FC: Fast Connect cable design
• 7-W: 7-wire, e.g. for applications where vibrations occur
• PE: polyethylene outer sheath, black
• P: PolyurethaneH: Halogen-free 
• COMBI: Data transmission andpower supply in one cable

Product Features

• These bus cables can be used for PROFIBUS-DP as well as for PROFIBUS-FMS and FIP
• Based on the bit rates listed, in accordance with PNO specifications the following maximum cable lengths for a bus segment apply(cable type A, PROFIBUS-DP):93.75 kbit/s = 1200 m187.5 kbit/s = 1000 m500 kbit/s = 400 m1.5 Mbit/s = 200 m12.0 Mbit/s = 100 m

Technical Data

Minimum Bending Radius

• Fixed installation: see data sheet

Test Voltage

• Core/core: 1500 V rms

Peak Operating Voltage

• (not for power applications) 250 V

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000830
• ETIM 5.0 Class-Description: Data cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000830
• ETIM 6.0 Class-Description: Data cable

LI30-20B24PR2 -DIN rail power supply; Output 24Vdc at 1.5A; 36 Watt , metal case.

NP301 is the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. The product supports 1 RS-232/RS-422 /RS-485 to 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes.

Serial device server supports multiple network protocols, such as TCP, UDP, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server, Advanced UDP operating modes and AT, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features and Benefits :

• Adopt 32 bits ARM processor
• Support 10/100Base-T(X) self-adaptive Ethernet interface
• Support AUTO MDI/MDIX, which can be connected via crossover cable and straight-through cable
• Support 300bps-115200bps line speed and non-blocking communication
• Support low power consumption mode and high performance mode
• Support TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server and Advanced UDP operating mode
• Support AT command, which is convenient for the secondary development of users
• Support DNS, which can achieve communication via domain name
• Support across gateway and routing communication
• Support virtual serial port drive access mode and automatic connection recovery after network interruption
• Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
• Support standard TCP/IP SOCKET application access
• TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously
• UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously
• Support Windows configuration tool, serial port, WEB and other configuration forms
• Support local and remote system firmware upgrading

USB232/485/422 is a USB to RS-232/485/422 interface converter, which can achieve bidirectional data conversion between USB interface and RS-232/485/422 serial ports. The product supports 1 USB interface and 1 RS-232/485/422 serial port. RS-485/422 supports serial port self-adaption technology, which can identify RS-485/RS-422 serial port with no need of switch setting. Serial port is equipped with 8kV electrostatic protection and 2kV isolation protection, which can effectively protect the device from damage. It adopts wall mounting to meet the requirements of different application fields.

The product provides matched driver program software; USB interface connected to PC will make up a serial COM port in the computer system automatically. PC host can communicate with RS-232/485/422 serial devices via virtual COM port.

Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC, Industrial Automatic Control, IC Card Toll Collection System, and Data Acquisition Control System, etc.

NP304T series are the serial device servers that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This series include 3 types of products and provide 4 RS-232, RS-485/422 or 3IN1 serial port to 1 100M Ethernet copper port. Thereinto, RS-485/422 supports electromagnetic isolation of serial port. It adopts wall/desktop mounting to meet the requirements of different application scenes.

Serial device server supports multiple network protocols, such as TCP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast operating modes and TELNET, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

DIP switch can achieve restore factory defaults of the device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features and Benefits :

• Support 10/100Base-T(X) self-adaptive Ethernet interface
• Support 300bps-115200bps line speed and non-blocking communication
• Support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast and other operating modes
• Support across gateway and routing communication
• Support multiple hosts polling mode, which allows multiple hosts to access the same serial port
• Support delimiter matching communication, achieving various demands for serial port packaging
• Support FIFO, compatible with various old type terminal devices
• Support IP address and MAC address filtering, which can easily achieve accurate access control
• Support classification of user management to realize humanized permission management
• Support serial port status and parameters monitoring, ensuring the communication status be clear at a glance
• Support RTS/CTS, DTR/DSR and XON/XOFF flow control
• Compatible with various virtual serial port management software
• Support virtual serial port drive access mode and automatic connection recovery after network interruption
• Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
• Support standard TCP/IP SOCKET application access
• TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously
• UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously
• Support Windows configuration tool, TELNET, WEB and other configuration forms

NP3016T series are the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This series include 4 types of products; provide 16 RS-232/485/422/3IN1 serial port to 1 100M Ethernet copper port and support single or dual Ethernet port. It adopts rack mounting to meet the requirements of different application scenes.

Serial device server supports multiple network protocols, such as TCP, UDP, SNMP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast operating modes and TELNET, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

DIP switch can achieve restore factory defaults of the device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features and Benefits :

• Support 10/100Base-T(X) self-adaptive Ethernet interfaces
• Support 300bps-115200bps line speed and non-blocking communication
• Support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast and other operating modes
• Support across gateway and routing communication
• Support multiple hosts polling mode, which allows multiple hosts to access the same serial port
• Support delimiter matching communication, achieving various demands for serial port packaging
• Support FIFO, compatible with various old type terminal devices
• Support IP address and MAC address filtering, which can easily achieve accurate access control
• Support classification of user management to realize humanized permission management
• Support serial port status and parameters monitoring, ensuring the communication status be clear at a glance
• Support RTS/CTS, DTR/DSR and XON/XOFF flow control
• Support SNMP network management
• Compatible with various virtual serial port management software
• Support virtual serial port drive access mode and automatic connection recovery after network interruption
• Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
• Support standard TCP/IP SOCKET application access
• TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously
• UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously
• Support Windows configuration tool, TELNET, WEB and other configuration forms

12 port fully loaded liu_lc_multi mode_din rail_om-2

6 Port Fully Loaded LIU_LC_Multi Mode_DIN RAIL_OM-2

6 Port Fully Loaded LIU_SC_Single Mode_DIN RAIL

Standard Industrial Modbus TCP/RTU/ASCII Network Integration

PLANET has added the Industrial Modbus TCP/IP Protocol to its easily-integrated industrial management level products that come with SCADA/HMI system and other data acquisition systems on factory floors. Moreover, the industrial IT SNMP network is upgraded to the Industrial automation Modbus TCP/IP network. PLANET industrial management level products with the Modbus TCP/IP Protocol offer flexible network connectivity solutions for the industrial automation environment.

To complete the industrial automation environment application solution, PLANET has announced a first industrial level 1-port RS232/422/485 Modbus Gateway, IMG-2100T, a bridge that converts between Modbus TCP/IP Protocol and Modbus RTU/ASCII Protocol. It features a wide operating temperature range from -40 to 75 degrees C and a compact but rugged IP30 metal housing.

Features

Serial Interface

• One DB9 interface that supports RS232
• One terminal block interface that supports 2-wire RS485 and 4-wire RS422/RS485 operation
• Asynchronous serial data rates up to 921600bps

Ethernet Interface

• 1-port 10/100BASE-TX RJ45 interface with auto MDI/MDI-X function

Management Function

• Built-in IP-based Web interface and telnet interface for remote management
• Software Protocol supports Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS
• Supports RTU Master, RTU Slave, ASCII Master, and ASCII Slave four serial operation modes via management interface
• Master mode supports 32 TCP slave connection requests
• Slave mode supports 32 TCP master connections
• PLANET Modbus Gateway utility for finding client device on the network
• PLANET Smart Discovery utility automatically finds the client devices on the network
• Firmware upgrade/configuration backup and restore via HTTP protocol

Industrial Case and Installation

• IP30 metal case
• DIN-rail and wall-mount designs
• Redundant power design

- 9 to 48V DC / 24V AC, redundant power with reverse polarity protection

• Supports 6000 VDC Ethernet ESD protection
• Free fall, shock-proof and vibration-proof for industries
• Supports extensive LED indicators for network diagnosis

-40 to 75 degrees C operating temperature 

• Reset button for resetting to factory default

Cost-effective Solutions of RS-232 / RS-422 / RS-485 for Industrial Ethernet Applications

PLANET ICS-2100 Smart Media Converter / Device Server series offers conversion of serial RS-232 / RS-422 / RS-485 communication to Industrial Fast Ethernet networking. It allows serial and Ethernet communications to connect efficiently and inexpensively. The ICS-2100 is a time-saving and cost-effective solution for users and SIs to quickly transform its serial equipment to the Ethernet network with no need of replacing the existing serial equipment and software system.

Remote Manageable

The ICS-2100 makes the connected serial equipment become the IP-based facilities and able to connect to a TCP/IP networking immediately. It also provides Web Management Interface for efficient network management. The powerful Web-Smart Media Converter supports application mode and serial operation mode for alarm or IP address connection, which helps reduce a network administrator’s time by detecting and locating network problems without requiring visual inspection of cabling and equipment. Multiple connection options are available for large networking environment as well.

Stable Performance under Difficult Environments

• The ICS-2100 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Its operating temperature range from -10 to 60 degrees C allows the ICS-2100 to be placed in almost any difficult environment.
• The ICS-2100 is equipped with the compact, IP30 standard metal case that allows either DIN rail or wall mounting for efficient use of cabinet space. The ICS-2100 also provides an integrated power supply source with wide range of voltages (12 to 48V DC) ideally suitable for worldwide operation with high availability applications requiring dual or backup power inputs.

https://www.planet.com.tw/en/product/ics-2100

NP314T series are the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This series include 2 types of products and provide 4 RS-485/422 or 3IN1 serial port to 2 100M Ethernet copper port. Thereinto, RS-485/422 supports electromagnetic isolation of serial port. It adopts wall/desktop mounting to meet the requirements of different application scenes.

Serial device server supports multiple network protocols, such as TCP, UDP, SNMP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast operating modes and TELNET, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

DIP switch can achieve restore factory defaults of the device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features and Benefits :

• Support 2 10/100Base-T(X) self-adaptive Ethernet interfaces, which provide double IP and MAC addresses to meet the requirements of network management or backup
• Support 300bps-115200bps line speed and non-blocking communication
• Support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast and other operating modes
• Support across gateway and routing communication
• Support multiple hosts polling mode, which allows multiple hosts to access the same serial port
• Support delimiter matching communication, achieving various demands for serial port packaging
• Support FIFO, compatible with various old type terminal devices
• Support IP address and MAC address filtering, which can easily achieve accurate access control
• Support classification of user management to realize humanized permission management
• Support serial port status and parameters monitoring, ensuring the communication status be clear at a glance
• Support RTS/CTS, DTR/DSR and XON/XOFF flow control
• Support SNMP network management
• Compatible with various virtual serial port management software
• Support virtual serial port drive access mode and automatic connection recovery after network interruption
• Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
• Support standard TCP/IP SOCKET application access
• TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously
• UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously
• Support Windows configuration tool, TELNET, WEB and other configuration forms

The Bausch DinBox PSTN 485 SIA modem was specifically designed to meet the stringent requirements for the Medical Services and Electricity Metering Industry, as well as for alarm equipments. The embedded SM_H2 socket Modem with 3kV isolation is based on the well-proven Conexant (Harley 2) technology. Especially for alarm equipments the modem supports the SIA & Contact ID protocol. The DinBox PSTN 485 SIA) is a professional V.92 56K modem designed in a robust 22.5 mm wide DIN-rail housing with a wide range DC power supply (10-40 Vdc). Stable operation is guaranteed by the long term watchdog that monitors and automatically resets the modem in case of malfunction. The modem has a RS-232 and RS-485 2 and 4-wire interface. For security reasons it supports selective Caller ID answering with disabled automatic answering (ATS0=0). Firmware adaptations according to your specifications are possible on demand.

Features :

• SIA & Contact ID Alarm Transmitter
• Industrial DINrail housing
• PSTN V.92 modem
• Wide range DC power supply (10-40Vdc) with Watchdog circuit
• RS-232 serial interface
• RS-485 (2-4 wire) serial interface
• Secured: Caller ID detect and answering
• Distinctive ring detect

Applications :

• Alarm equipments
• Remote reading of utility meters
• Medical applications
• Micro RTU applications
• Vending machine monitoring
• Remote control
• Security alarms
• Measurement instruments
• Surveillance systems
• Point of Sales

Extenseur d'Ethernet liaison point à point Plug & Play:

( 1 port SHDSL, LAN : 1 Eth)

Boitier métallique IP20 avec fixation Rail DIN

1 port SHDSL pour connection point à point

Connexion LAN : 1 port Ethernet

Installation « Plug & Play » (configuration par serveur HTML possible)

Autonegociation

De 192Kb/s à 15Mb/s pour une paire

T° d’utilisation : -20°C/+70°C

Qualité de Service Diffserv

VLAN

Une entrée d’alimentation