Brand Liaison India Pvt Ltd

Laxmi Nagar, delhi

We are providing BIS Registration Consultancy in all major cities of India likeDelhi, Mumbai, Chennai, Bangalore, Pune, Kolkata, Hyderabad, Ahmedabadetc.BIS Registration Services for Projectorthe BIS product certification scheme is essentially required, and based on the ISO/IEC guide 28. We provide general rules for third party certification system of determining conformity with product standards through initial testing & assessment process of a factory. Following total quality management process and the testing of samples from the factory and the open market, we provide certification in accordance to the Indian standards.Other Details: Precise InformationProperly executed by expertsFull assurance of quality

We are a leading service provider of ISI Mark Certification Consultancy Service. We provide best services across India.The ISI mark is by far the most recognized product quality certification mark in the Indian subcontinent. The ISI mark is issued by Bureau of Indian Standards (BIS). There are 374 mandatory products which need ISI certification before being sold in India.

WPC Registration Services for Radio DevicesThe BIS product certification service is based on ISO/IEC guide 28 which provide general rules for third party certification system of determining conformity with product standards through initial testing and assessment of a factory quality management system. Its acceptance followed by surveillance that takes into account the factory quality management system and the testing of product samples is checked several times before the approval of services.

How to get BIS Certification in India?

The manufacturer(s) have to complete the testing and documentation required by BIS in order to certify the product with ISI mark. Factory will also require to get physically audited by the BIS officer.

 

Brand Liaison is an experienced service provider for ISI certification for Indian as well as foreign manufacturers. We help to manage all the required process to obtain the ISI Certification for products mentioned in the mandatory list or other optional products for which Indian Standard is available. For details, please check the Important Information given below.

 

Required Documents

List of Documents Required for ISI (BIS) Certification are as under:

 

Main Application Form V -

(Basic details of factory & product category)

 

ISI Application Fee -

(Copy of Remittance / Payment Advice)

 

Copy of Test Report done within a month by internal laboratory

(Indicating conformance of the product to relevant Indian Standard) 

 

Address Proof of the Manufacturing Unit

(Factory License / Tax Registration copy mentioning the scope as manufacturer)

 

Trade Mark Registration, if available  

(TM Registration copy)

 

Certificate from concerned regulatory agencies for manufacturing

(If there is any)

 

Drawing of the product

(As applicable)

 

Present Installed Capacity

(Manufacturing)

 

Raw Material Details

(Name of component used - name of supplier - quality certification of component)

 

Details of Machines

(Name of machine – make - capacity – number/quantity)

 

Layout plan of factory

(Floor & technical)

 

Details of Manufacturing Process

(Process flow chart along with outsourcing details, if any)

 

Nature of packing

(Size/quantity of packaging, storage facility)

 

Details of Test Equipments

(Name of equipment - Size – Quantity – Calibration Status & Date)

 

Details of QC (Quality Control) Staff

(Name of person, qualification, designation, year of experience)

 

Method of disposal of substandard product

(After manufacturing)

 

Organizational Chart of Factory

(Management list with name & designation in chart format)

 

Location Map of Factory 

(With indicating the distance from Airport & City Centre)

 

Specific Requirements for Foreign Manufacturers 

 

Costing and Timeline

 

Costing 

For a customized and attractive quotation, please contact us with your product details at +91-9250056788 / +91-8130856678.

 

Timeline 

• Indian manufacturers - 25 - 40 working days approx.
• Foreign manufacturers - 5 - 6 months approx.

 

Validity and Renewal

The licence to use Standard Mark (ISI) shall initially be granted for not less than one year and up to two years. For extension of product varieties covered in licence, application with requisite fee and documents under the existing licence may be submitted.

 

Licence may be renewed up to five years by applying renewal fees and marking fees along with few documents.

Who Can Apply Under FMCS?

The company which is situated outside India is applicable for FMCS.

 

Following points should be taken into the consideration by the manufacturers while applying for ISI Certificate:

• Make sure that all products are classified under Indian Standards Specification.
• At the factory premises, all the manufacturing facility should be available.
• Testing of the products as per Indian Standards Specification (ISS), proper arrangement for the same must be available at the factory premises.
• The scheme of testing fees must be accepted by the manufacturer.
• Company must accept the Terms & Conditions of Certificate.

 

Procedure for FMCS Service

• Once the application process is registered, the BIS authority will calibrate the application and if there any queries it will be communicated to the applicant by e-mail or phone.
• The applicant will be informed that BIS Officer visits at a given scheduled time. At the time of the visit by the officer, the officer will verify the manufacturing & testing infrastructure and some samples for independent testing.
• The applicant needs to pay the visit charges as well as testing charges to the authority for further processing of application.
• Certificate will be valid for 1 year a.nd can then be further renewed for next 1 year.

How to get TEC Certification in India?

TEC Certification is given after testing and evaluating the product for compliance. TEC Certificate will be given to manufacturer.

 

Brand Liaison has the team of committed TEC Registration specialists who excellently utilize their skills and provide complete support and assistance in getting TEC Certification in India from start to end. For details, please check the Important Information given below.

 

Mandatory Product List

Mandatory List of Products for TEC Certification is as below:

• Two Wire Telephone Equipment (SCS)
• Group 3 Fax Machine (SCS)
• Data Modem (connectable on 2-wire Analog Line) (SCS)
• Point of Sale (POS) Devices with or without Biometric Scanner
• Cord Less Telephone (GCS)
• PON Family of Broadband Equipments (ONT, ONU, OLT)
• IoT Gateway with Cellular Connectivity
• Endpoint Device for Environmental Monitoring with Cellular Connectivity
• Feedback Devices (IoT) with Cellular Connectivity
• ISDN Customer Premises Equipment (SCS)
• PABX (GCS)
• Transmission Terminal Equipments (SDH Equipment, Multiplexing Equipment)

 

Required Documents

• Documents / Technical Details Required for TEC Certification
• Legal address proof of the Manufacturing Unit
• Copy of Factory License mentioning the relevant product as the scope of manufacturing and indicating the address of manufacturing unit - in English as well in original language

 

Trademark Details

• Copy of Trademark (Brand) Registration
• Authority Letter from Trademark owner, if manufacturing unit is not the owner of Trademark

 

Technical Details about the Product

• Sample(s) along with user manual and accessories to run the product
• Product name, Brand name and Model number
• Safety critical components list
• BoM (Bill of Material)
• PCB layout and circuit diagram of the product
• Mains power / SMPS Layout and circuit diagram
• Details of series models, if any - please refer the series guideline View / Download
• Copy of marking label
• OEM support to configure the product for functional testing, if required
• Details of AIR (Authorized Indian Representative), in case of foreign manufacturer

• KYC of AIR Company
• Details of signatory person
• Additional Technical Details in case of Cell / Battery
• UN 38.3 test report (Transportation of Dangerous Goods) for lithium ion cells and batteries
• ISO 9001 certificate

 

Groups and Schemes in TEC

 

Groups in TEC

Groups in TEC are made according to the time and complexity involved in testing the equipment or evaluating test reports. These equipments are divided into three Groups: Group A, Group B and Group C.

 

Schemes in TEC

Below are the 2 types of Certification Schemes for notified Telecom Equipment:

 

General Certification Scheme (GCS)

• Under this scheme, applicant has to submit test wise compliance along with test reports, in respect of parameters included in  Essential Requirements (ERs), from any designated Conformance Assessment Body (CAB).
• General Certification Scheme (GCS) is applicable to Group A, Group B and Group C equipment.

 

Simplified Certification Scheme (SCS)

Under this scheme, applicant has to submit a test wise compliance sheet, along with a Self-Declaration of Conformity (SDoC), in respect of parameters included in ERs. Test reports from CAB are not required to be submitted by applicant or evaluated by TEC.

Simplified Certification Scheme (SCS) is applicable to Group A equipment.

All types of Low Voltage Switchgears became mandatory for BIS certification. It will be covered under Scheme II of BIS i.e. CRS(Compulsary Registration Scheme).