Post Buy Requirement
Brick well
Hyderabad, Telangana, India
gstGST : 36ACIPA8274C1ZS Verified Add Review

Other Products / Services

Autoclaves

  • Min. Order (MOQ) 1 Set(s)
  • Country of Origin India
  • Type Horizontal Autoclave
  • Material Carbon Steel
  • Shape Round
  • Certification CE Certified
  • Color BOQ PLATES
  • Voltage 415V
  • Condition New
  • Power New
  • Pressure High Pressure
  • Surface Finishing Painted
  • Operating Mode Semi Automatic
  • Brand Name Semi Automatic
  • Phase Three Phase
  • IP Grade Three Phase
  • Warranty 1 Year
  • Corrosion Resistance Yes
  • Mount Type Floor Mounted Autoclave
  • Rust Proof Yes
  • Usage Industrial Use
  • Specialities Hardend & Temper, Accuracy Durable
  • Thickness 16-22mm
  • Weight 30.00 Mt +
  • Overall Dimension 2.0mtr X 30.00mtr
  • Capacity 2.0mtr X 30.00mtr
  • Chamber Volume 2.0mtr X 30.00mtr
  • Packaging Type 2.0mtr X 30.00mtr
  • Operating Temperature 210 Degree
  • Width 2.0MTR
  • Height 3.0MTR
  • Depth 30MTR

Autoclave is a large steam equipment, which can be usd in steaming lime-sand brick, flyash brick, slag brick, the air concrete block, cement pile, and other cement products. Our company can manufacture all kinds of autoclaves according to requirements of users to meet the demands of application.

 

Autoclaves of our company have been developed with the best features of similar products at home and abroad. The design of main pressure parts have been done according to finite element analysis and all kinds of stress test to improve strength calculation.

 

Autoclave structure is steel horizontal cylinder design, and the whole autoclave body adopts Q345R steel plate. Autoclave body flange, autoclave cover flange both feature 16MnIIforge piece to manufacture. Weld of pressure parts have been inspected with X-ray non-destructive testing and heat treatment according to GB150-2011(Pressure Vessel) industrial standard. Sealing of autoclave door adopt imported rubber seal ring which is produced by professional manufacturers. It features easy installation, good sealing and long service life. According to different parts of autoclave body bearing, we set up hold-down support, movable bearing support and customization according to geographical requirements. It adapts expansion and contraction of autoclave body well and ensure steam distribution pipe and rail. Besides, we specially install sealing gas mask, hydrophobic cover.

 

Products are complete and available with manual control and computer control. Autoclave door adopts active-opening structure, and opens and closes by hand speed reducer or can be electric driven, aerodynamic driven and hydraulic driven. The equipment deploy perfect safety chain protection device, which avoids mistaken operation during high limit, and ensures safe operation of autoclave and safe production of operation staff. The way of opening door has side-opening door and up-sliding door depending on users selection. Side-opening adopts rotating arm type opening structure, flexible turning, low operating, and easy opening. Up-sliding door adopts lever-type opening structure, leverage bottom connects with autoclave door. At the top of the door, there is counterweight device, and this type opens easily and kettle side occupies small space.

 

Autoclave deploy safety valve, pressure gauge, temperature element air release valve, seal ball valve, trap and so on. We have drainage pipe connectors for the user matching use.

 

Autoclave Technology Points :

  • Autoclave belongs to low cycle fatigue pressure vessel. So the right choice of main pressure part material is especially important. Selection principles has the following five:
  • According to service conditions of vessels, such as design temperature (design pressure, medium characteristic, operating feature). Selected material should have enough strength. This is necessary for autoclave to bear all kinds of loads.
  • Good toughness. If material toughness is not good, it will directly effect service life of autoclave which is considered by low cycle fatigue stress. This is one of the main reasons which cause brittle failure of autoclaves.
  • Good process and weldability. In order to improve weldability, we should use low phosphorus sulfur of high-quality steels which carbon content is less than 0.25%. It needs better cold heat processing.
  • Good corrosion resistance
  • Material price is reasonable and source of goods is ample
View Complete Details

Brick Making Machine

15 Lakh /Set Get Latest Price
  • Min. Order (MOQ) 1 Set(s)
  • Type Brick Making Machine
  • Condition New
  • Automatic Grade Automatic, Semi Automatic
  • Warrenty 1 Year
  • Brand Name Brickwell

we would like to introduce ourself as manufacturer of fly ash bricks & blocks, pavers and concrete block making machines.we manufacture machines that have aproduction capacity of 10, 000 to 1, 50, 000 per shiftandwould like to give you a quotation that suits your requirements.we also provide complete turnkey projects for fly ash bricks (semi automatic & fully automatic), concrete hollow/solid blocks, concrete paving blocks/interlocking pavers, kerb stone, aac blocks, and designer tiles etc. To add to that, we make both hydraulicfor flyash bricks and vibro machines for all other concrete bricks and blocks (hollow and solid) and interlocking pavers.

View Complete Details

Reinforced Wall Panel

52 - 105 /sft Get Latest Price
  • Min. Order (MOQ) 34 Cubic Meter
  • Width 600mm
  • Length 2400-3000mm
  • Thickness of 75 200mm per 25mm interval.

autoclaved aerated concrete (aac) panels:


autoclaved aerated lightweight concrete (aac) panels though largely new to india, can be used in both load and non-load-bearing applications. Complete load bearing applications, however, are limited to low-rise construction, though cladding and large panels are available to take advantage of aacs insulative, fire proofing, and other benefits on mid- and high-rise projects. Additionally, the large wall, floor, and roof panels, measuring up to 10 feet long, 2 feet wide, and in various thicknesses, are also used in load-bearing capacities and are common in commercial and industrial applications. Aac panels, also called units are stacked using thin-set mortar, as opposed to the traditional cement-based mortar used in cmu construction.
due to aacs design flexibility and combined structural and insulation components, an entire structure can be built using the one material. Exterior surfaces can be finished with stucco, traditional veneers or siding, while interior walls can be plastered, painted, or left unfinished, in addition to traditional sheetrock finishes.


further, acc is easy to use and can be cut and manipulated with normal wood-working tools.


with cement, lime, silica sand as raw materials, adopting two-way and welded steel reinforcement mesh(reinforcing bar) processed by special anti-rust liquid , produced in high temperature, high pressure and steam curing, its a kind of porous silicate plate of high performance, and has many incomparable performances of good fire-resistance, fire prevention, sound insulation, heat insulation, thermal insulation etc. It can be categorized into external wall panels, partition panels (internal panels), roof panels, floor panels according to usage.
aac panel is processed according to the pre-defined sizes by actual field measurement. As a prefabricated product, its of high precision, sawable and drillable. Used in dry operation, it is
convenient to install in a simple process, greatly shortening the construction period, and improving the efficiency and quality of construction.
the reinforcement is calculated and determined according to the work load, the specifications of the panel.


View Complete Details

AAC Reinforced Wall Panel

15,000 - 25,000 /Meter Get Latest Price
  • Width 600mm
  • Length 2400-3000mm
  • Thickness 75-200mm per 25mm interval.

Autoclaved Aerated Lightweight Concrete (AAC) Panels – though largely new to India, is not a new building material. Developed in Sweden in the 1920s in response to increasing demands on timber supplies ACC is a lightweight manufactured building stone. Comprised of all natural raw materials viz., cement, Quick lime, and Silica Sand. AAC is used in a wide range of commercial, industrial, and residential applications and has been in use in Europe for over 70 years, the Middle East for the past 40 years, and South America and Australia for approximately 20 years.

 

According to one manufacturer, AAC now accounts for over 40% of all construction in the United Kingdom and more than 60% of construction in Germany AAC Product Types AAC, unlike traditional concrete masonry units (“CMU”), is a solid panel /material system with integrated insulative and structural components, and is available in a variety of products that can be used in both load and non-load-bearing applications. Complete load bearing applications, however, are limited to low-rise construction, though cladding and large panels are available to take advantage of AAC’s insulative, fire proofing, and other benefits on mid- and high-rise projects. Additionally, the large wall, floor, and roof panels, measuring up to 10 feet long, 2 feet wide, and in various thicknesses, are also used in load-bearing capacities and are common in commercial and industrial applications. AAC Panels, also called “units” are stacked using thin-set mortar, as opposed to the traditional cement-based mortar used in CMU construction.

 

Due to AAC’s design flexibility and combined structural and insulation components, an entire structure can be built using the one material. Exterior surfaces can be finished with stucco, traditional veneers or siding, while interior walls can be plastered, painted, or left unfinished, in addition to traditional sheetrock finishes.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Naresh Agarwal (Brick well)
  • 6-27/34/4,Plot No 34E, S V Co operative Industrial Estate, Balanagar,, Hyderabad, Telangana - 500037
  • Share us via
  • Call 08069247352 Ext. 455
Manufacturer from Hyderabad, Telangana
Post Buy Requirement
Brick well
Hyderabad, Telangana, India
gstGST : 36ACIPA8274C1ZS Verified Add Review

Other Products / Services

Autoclaves

  • Min. Order (MOQ) 1 Set(s)
  • Country of Origin India
  • Type Horizontal Autoclave
  • Material Carbon Steel
  • Shape Round
  • Certification CE Certified
  • Color BOQ PLATES
  • Voltage 415V
  • Condition New
  • Power New
  • Pressure High Pressure
  • Surface Finishing Painted
  • Operating Mode Semi Automatic
  • Brand Name Semi Automatic
  • Phase Three Phase
  • IP Grade Three Phase
  • Warranty 1 Year
  • Corrosion Resistance Yes
  • Mount Type Floor Mounted Autoclave
  • Rust Proof Yes
  • Usage Industrial Use
  • Specialities Hardend & Temper, Accuracy Durable
  • Thickness 16-22mm
  • Weight 30.00 Mt +
  • Overall Dimension 2.0mtr X 30.00mtr
  • Capacity 2.0mtr X 30.00mtr
  • Chamber Volume 2.0mtr X 30.00mtr
  • Packaging Type 2.0mtr X 30.00mtr
  • Operating Temperature 210 Degree
  • Width 2.0MTR
  • Height 3.0MTR
  • Depth 30MTR

Autoclave is a large steam equipment, which can be usd in steaming lime-sand brick, flyash brick, slag brick, the air concrete block, cement pile, and other cement products. Our company can manufacture all kinds of autoclaves according to requirements of users to meet the demands of application.

 

Autoclaves of our company have been developed with the best features of similar products at home and abroad. The design of main pressure parts have been done according to finite element analysis and all kinds of stress test to improve strength calculation.

 

Autoclave structure is steel horizontal cylinder design, and the whole autoclave body adopts Q345R steel plate. Autoclave body flange, autoclave cover flange both feature 16MnIIforge piece to manufacture. Weld of pressure parts have been inspected with X-ray non-destructive testing and heat treatment according to GB150-2011(Pressure Vessel) industrial standard. Sealing of autoclave door adopt imported rubber seal ring which is produced by professional manufacturers. It features easy installation, good sealing and long service life. According to different parts of autoclave body bearing, we set up hold-down support, movable bearing support and customization according to geographical requirements. It adapts expansion and contraction of autoclave body well and ensure steam distribution pipe and rail. Besides, we specially install sealing gas mask, hydrophobic cover.

 

Products are complete and available with manual control and computer control. Autoclave door adopts active-opening structure, and opens and closes by hand speed reducer or can be electric driven, aerodynamic driven and hydraulic driven. The equipment deploy perfect safety chain protection device, which avoids mistaken operation during high limit, and ensures safe operation of autoclave and safe production of operation staff. The way of opening door has side-opening door and up-sliding door depending on users selection. Side-opening adopts rotating arm type opening structure, flexible turning, low operating, and easy opening. Up-sliding door adopts lever-type opening structure, leverage bottom connects with autoclave door. At the top of the door, there is counterweight device, and this type opens easily and kettle side occupies small space.

 

Autoclave deploy safety valve, pressure gauge, temperature element air release valve, seal ball valve, trap and so on. We have drainage pipe connectors for the user matching use.

 

Autoclave Technology Points :

  • Autoclave belongs to low cycle fatigue pressure vessel. So the right choice of main pressure part material is especially important. Selection principles has the following five:
  • According to service conditions of vessels, such as design temperature (design pressure, medium characteristic, operating feature). Selected material should have enough strength. This is necessary for autoclave to bear all kinds of loads.
  • Good toughness. If material toughness is not good, it will directly effect service life of autoclave which is considered by low cycle fatigue stress. This is one of the main reasons which cause brittle failure of autoclaves.
  • Good process and weldability. In order to improve weldability, we should use low phosphorus sulfur of high-quality steels which carbon content is less than 0.25%. It needs better cold heat processing.
  • Good corrosion resistance
  • Material price is reasonable and source of goods is ample
View Complete Details

Brick Making Machine

15 Lakh /Set Get Latest Price
  • Min. Order (MOQ) 1 Set(s)
  • Type Brick Making Machine
  • Condition New
  • Automatic Grade Automatic, Semi Automatic
  • Warrenty 1 Year
  • Brand Name Brickwell

we would like to introduce ourself as manufacturer of fly ash bricks & blocks, pavers and concrete block making machines.we manufacture machines that have aproduction capacity of 10, 000 to 1, 50, 000 per shiftandwould like to give you a quotation that suits your requirements.we also provide complete turnkey projects for fly ash bricks (semi automatic & fully automatic), concrete hollow/solid blocks, concrete paving blocks/interlocking pavers, kerb stone, aac blocks, and designer tiles etc. To add to that, we make both hydraulicfor flyash bricks and vibro machines for all other concrete bricks and blocks (hollow and solid) and interlocking pavers.

View Complete Details

Reinforced Wall Panel

52 - 105 /sft Get Latest Price
  • Min. Order (MOQ) 34 Cubic Meter
  • Width 600mm
  • Length 2400-3000mm
  • Thickness of 75 200mm per 25mm interval.

autoclaved aerated concrete (aac) panels:


autoclaved aerated lightweight concrete (aac) panels though largely new to india, can be used in both load and non-load-bearing applications. Complete load bearing applications, however, are limited to low-rise construction, though cladding and large panels are available to take advantage of aacs insulative, fire proofing, and other benefits on mid- and high-rise projects. Additionally, the large wall, floor, and roof panels, measuring up to 10 feet long, 2 feet wide, and in various thicknesses, are also used in load-bearing capacities and are common in commercial and industrial applications. Aac panels, also called units are stacked using thin-set mortar, as opposed to the traditional cement-based mortar used in cmu construction.
due to aacs design flexibility and combined structural and insulation components, an entire structure can be built using the one material. Exterior surfaces can be finished with stucco, traditional veneers or siding, while interior walls can be plastered, painted, or left unfinished, in addition to traditional sheetrock finishes.


further, acc is easy to use and can be cut and manipulated with normal wood-working tools.


with cement, lime, silica sand as raw materials, adopting two-way and welded steel reinforcement mesh(reinforcing bar) processed by special anti-rust liquid , produced in high temperature, high pressure and steam curing, its a kind of porous silicate plate of high performance, and has many incomparable performances of good fire-resistance, fire prevention, sound insulation, heat insulation, thermal insulation etc. It can be categorized into external wall panels, partition panels (internal panels), roof panels, floor panels according to usage.
aac panel is processed according to the pre-defined sizes by actual field measurement. As a prefabricated product, its of high precision, sawable and drillable. Used in dry operation, it is
convenient to install in a simple process, greatly shortening the construction period, and improving the efficiency and quality of construction.
the reinforcement is calculated and determined according to the work load, the specifications of the panel.


View Complete Details

AAC Reinforced Wall Panel

15,000 - 25,000 /Meter Get Latest Price
  • Width 600mm
  • Length 2400-3000mm
  • Thickness 75-200mm per 25mm interval.

Autoclaved Aerated Lightweight Concrete (AAC) Panels – though largely new to India, is not a new building material. Developed in Sweden in the 1920s in response to increasing demands on timber supplies ACC is a lightweight manufactured building stone. Comprised of all natural raw materials viz., cement, Quick lime, and Silica Sand. AAC is used in a wide range of commercial, industrial, and residential applications and has been in use in Europe for over 70 years, the Middle East for the past 40 years, and South America and Australia for approximately 20 years.

 

According to one manufacturer, AAC now accounts for over 40% of all construction in the United Kingdom and more than 60% of construction in Germany AAC Product Types AAC, unlike traditional concrete masonry units (“CMU”), is a solid panel /material system with integrated insulative and structural components, and is available in a variety of products that can be used in both load and non-load-bearing applications. Complete load bearing applications, however, are limited to low-rise construction, though cladding and large panels are available to take advantage of AAC’s insulative, fire proofing, and other benefits on mid- and high-rise projects. Additionally, the large wall, floor, and roof panels, measuring up to 10 feet long, 2 feet wide, and in various thicknesses, are also used in load-bearing capacities and are common in commercial and industrial applications. AAC Panels, also called “units” are stacked using thin-set mortar, as opposed to the traditional cement-based mortar used in CMU construction.

 

Due to AAC’s design flexibility and combined structural and insulation components, an entire structure can be built using the one material. Exterior surfaces can be finished with stucco, traditional veneers or siding, while interior walls can be plastered, painted, or left unfinished, in addition to traditional sheetrock finishes.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Naresh Agarwal (Brick well)
  • 6-27/34/4,Plot No 34E, S V Co operative Industrial Estate, Balanagar,, Hyderabad, Telangana - 500037
  • Share us via
  • Call 08069247352 Ext. 455