Dehumidifiers #46332

designed aesthetically the fli series bry-air dehumidifiers can be packaged with * pre filter * after filter * pre cooling (fresh air cooling) * post cooling * bypass arrangement . . . .

. . . For complete air handling and environment control needs. Engineered to highest consistency, reliability and ecology standards, the fli rotary type, industrial dehumidifier removes moisture from air on a continuous basis.

the FLi dehumidifier incorporates the highly effective ecodry metal silicate desiccant synthesized rotor to meet the industry needs to for equipment with small footprint coupled with high moisture removal capability.

ecodry at the heart of it

the ecodry dehumidifying rotors are the result of many man-years of in-depth study and research on countless permutations and combinations of substrates, desiccants and chemical processes. Every parameter has been considered to maximize performance, durability and applicability.

advantage with ecodry inside

• adsorbent, non-toxic, non-flammable, fully water washable
• in-situ synthesized metal silicate desiccant on an inert inorganic fibre substrate
• active desiccant 80% of the media weight, so as to ensure high performance and minimal heat carry-over
• rotor is non-flammable. The net organics in the honeycomb media less than 2%
• special edge hardened media surface to ensure a smooth surface and long life of both, media and the seal contacting it
• rotor perimeter flange extend media and seal life

• rotor incorporates robust internal structure with perimeter flange for industrial quality, durability and easy serviceability.

   

Largest capacity range in Compacts - from 170 cmh to 3000 cmh (100 cfm to 1766 cfm). The Bry-Air FFB Series, 170 cmh through 3000 cmh (100 cfm to 1766 cfm) desiccant dehumidifier line is designed to integrate "small footprint and finish" of a commercial unit with "the ruggedness" of an industrial dehumidifier.

The BRY-AIR® FFB Compact Dehumidifier is CNC fabricated with powder coated finish and incorporates a high performance fluted metal silicate desiccant synthesized rotor which allows for:

• * Reduced Foot Print
• * Increased Performance
• * Lowest Volume/ Weight per CMH
• * Innumerable mounting options
• * Light weight, and can be installed above the false ceiling eliminating the need for floor space

The FFB Compact Dehumidifier removes moisture through a process of continuous "physical adsorption". The moisture is adsorbed in the dehumidification sector by the fluted, desiccant synthesised rotor and is exhausted in the reactivation sector by a stream of hot air in a counter flow.

India Plant is the hub for all manufacturing of FFBs for the Bry-Air Group including USA.

Bry-Air engineered dehumidifiers maintain stringent Dry Room conditions for Lithium-battery processing. The DryPurge® dehumidifier from Bry-Air is the most efficient and economical solution to provide dry air required for Lithium-battery production. These engineered dehumidifiers are specially designed to control moisture levels in the lithium-battery manufacturing areas from -40°C to -70°C dew point depending on the process being carried out.
Lithium-battery processing generates hydrofluoric acid which is carried into the return air (4-6 ppm) damaging the dehumidification media and resulting in 30-50% weight loss in dehumidification capability. However, the heart of the DryPurge dehumidifier from Bry-Air is the EcoDry Desiccant Honeycomb Rotor which has excellent tolerance to hydrogen flouride, does not deteriorate easily and hence, does not require frequent replacement. The average life of the EcoDry Rotor is 5 years.

The DryPurge® Advantage …Cutting Edge Technology

• Tailored for range from (-) 40°C dewpoint to lower than (-) 70°C dewpoint application, with minimum energy requirement
• Low dew point with single wheel design up to (-) 70°C
• Bry-Air matrix is PH neutral and resistant to chemicals and gases
• Energy economics: Huge saving in Energy
• Compact design
• Service support
• Application experience
• High efficiency and reliability
• The Bry-Air’s DryPurge® (patent pending) Dehumidifier ensures recommended Dry Room conditions for lithium battery processing and special grade coloured nylon blended PET bottles.

Advantage With EcoDry Inside

• Adsorbent, non-toxic, non-flammable, fully water washable.
• In-situ synthesized metal silicate desiccant on an inert inorganic fibre substrate.
• Active desiccant 80% of the media weight, so as to ensure high performance and minimal heat carry-over.
• Rotor is non-flammable. The net organics in the honeycomb media less than 2%.
• Special edge hardened media surface to ensure a smooth surface and long life of both, media and the seal contacting it.
• Rotor perimeter flange extends media and seal life.
• Rotor incorporates robust internal structure with perimeter flange for industrial quality, durability and easy serviceability.

High Efficiency and reliability

• A totally self contained units
• CNC fabricated unit(s) with powder coated finish Rotor media has high performance metal silicates synthesized in situ.
• Rotor incorporates robust internal structure with stainless steel perimeter flange for industrial quality, durability and easy serviceability.
• Unit is compatible with both 100 mm and 200 mm deep rotors.
• Rotor perimeter flange extends media and seal life
• Edge hard face coating on rotor ensures long life and good sealing for media and seals.
• Rotor is non-flammable with organics < 2%.
• Process and reactivation air flow sectors are insulated
• Unique teflon with silicon spounge seal design; minimized air leakage
• Process fan with brushless DC motors for 200 to 1000 CMH units on sliding plate for easy access.
• Process fan with EC motors for 1500 and 2000 CMH units on sliding plate for easy access.
• PTC Heaters upto Victory plus 420 Model
• All operations automized using PLC.
• Access and maintainance to components from operation side only.
• Spigots on dismountable adapter plate for easy connection at inlet and outlet for extra equipment by flange rubber ducts.
• Integrated by pass purge air (process air if it is senseful)
• Integrated PID Controller with 2 fix setpoints.
• Speed controlled brushless/EC systems.

Necessary control and safeties

• Differential air pressure switch for providing react air flow.
• High temperature safety thermostat cutout.
• Microprocessor based controller for easy operation and having various options.
• Electrical interlocking of fan motors, heaters and rotor drive.

Easy to operate

• Suitable for continuous operation

Easy to Install

• Several mounting and installation options
• Small footprints; low volume/weight per CMH.

Easy to maintain

• Quick and easy to service
• Rotor is water washable

The BryCool 500 compact dehumidifier is another energy efficient compact dehumidifier from Bry-Air. BryCool accomplish the task of providing cool dry air for any close facility which requires desiccant assisted drying capability in a compact package. The unit uses the heat dissipated in refrigeration cycle for regenerating the desiccant rotor. This leads to substantial savings as no additional heat source is required to regenerate the desiccant rotor. Most of the times, it also helps avoiding installing additional air conditioning unit in the conditioned space as supply air is typically temperature neutral. BryCool operates very cost effectively because all the energy required for the operations of the desiccant dehumidifier cycle is coming from the integrated refrigeration unit which is cooling the inlet air. It is ideal for facilities where human comfort is also required along with dehumidification requirement. BryCoolTM incorporates the high performance EcoDryTM rotor and it comes with BryCareTM program which offers a highly cost effective after sales services.

• High Efficiency and Reliability
• Necessary Control and Safety Features
• Easy to Operate
• Easy to Install
• Easy to Maintain

BryCool uses two streams of air separated from each other to accomplish the task of providing cool dry air. The inlet air (Supply) passes through the evaporator coil for cooling and condensation of easy moisture. It then passes through the desiccant rotor where moisture is further adsorbed by the desiccant rotor. Thus process fan cool dry air is available for dehumidification. On the reactivation stream side, the heat dissipated by the condenser coil combined with heat dissipated by the refrigeration compressor is used to heat reactivation fresh air. The reactivation fresh air then passes through the desiccant rotor to expel out the moisture adsorbed by the desiccant rotor.

The new, Bry-Air BrySmart Series (BBS) Dehumidifiersis is embedded with patented* BrySmart ® and BryTherm technologies. The latest product offering from Bry-Air is designed for continuously optimizing Dynamic Specific Performance (DSP) and incorporates BHPTM (Bry-Air High Performance) rotor with special geometry and chemistry.

The Future Is Here!integrating 4.0 tomorrow based concepts & technologiesEmbedded with patented* BrySmart ® technology

• Energy saving upto 48%
• Optimized Dehumidifier performance
• Reduced annual Energy consumption
• Lower energy usage & maintenance cost
• Green technology

DPS … Dynamic Specific Performance

• Continuously senses and monitors temperature at varying locations in the rotor thus providing data for continuously optmizing performance

Embedded with patented* BryThermTM Technology

• Ensures maximum flexibility in operation
• User has the option to control parameter

Incorporating BHPTM Technology

• The customized rotor delivers an additional energy saving of upto 20% by reducing initial react energy input for equivalent performance of standard dehumidifiers

Optional…Bry-Air PrognosTM

• Most advanced tool for predictive failure/maintenance…the new world order for continuously diagnosing and forecasting components failure e.g. heater, drivers, switchgears, etc.