Delhi, India
Our Products
Largest capacity range in Compacts from 170 cmh to 3000 cmh (100 cfm to 1766 cfm). The Bry-Air FFB Series, 170 cmh through 3000 cmh (100 cfm to 1766 cfm) desiccant dehumidifier line is designed to integrate small footprint and finish of a commercial unit with the ruggedness of an industrial dehumidifier.The BRY-AIR FFB Compact Dehumidifier is CNC fabricated with powder coated finish and incorporates a high performance fluted metal silicate desiccant synthesized rotor which allows for:
The FFB Compact Dehumidifier removes moisture through a process of continuous physical adsorption. The moisture is adsorbed in the dehumidification sector by the fluted, desiccant synthesised rotor and is exhausted in the reactivation sector by a stream of hot air in a counter flow.
India Plant is the hub for all manufacturing of FFBs for the Bry-Air Group including USA.
In USA it is sold under the brand name : MiniPAC.
Bry-Air setting new benchmarks in gas phase filtration have introduced a custom-designed solution fordata centresknown as Bry-Air DataCenter Air Purifier (DAP). With the introduction of Bry-Air DataCenter Air Purifier (DAP), you can now protect your data center effectively from threat of electronic corrosion and abrupt failures. Bry-Air DAP is manufactured to the highest quality, reliability and ecological standards.
Bry-Air DAP houses a revolutionary Honeycomb Chemical Filter which is the heart of the system. This next generation revolutionary new medium is a building block of our new custom designed solution for data centers. Bry-Air macro-porous desiccant formed honeycomb matrix filter has a high bulk density and very high structural strength as well as adsorption capacity. This honeycomb matrix technology not only reduces the size of DAP but also increases its efficiency and life while reducing energy bills. All this provides a much higher capacity chemical filter with a much longer mean time between replacements (MTBR).
Some of the Salient Features of Honeycomb based Bry-Air DataCenter Air Purifier (DAP)
Ideal for drying non-hygroscopic resins, the Bry-Air EcoDry Hopper (Hot Air) Dryer is a compact and rugged hopper packaged with a blower, stainless steel tubular heaters and automatic temperature controller. Designed and engineered for easy handling, they are a perfect match for your plastics processing machine with the flexibility to be either be machine mounted or installed at the side of the moulding machine. The plastics resins, to be dried, can either be loaded manually or with the Bry-Air Auto Loader.
Available in 6 standard models with a capability to dry 13 to 400 kg/hr of non hygroscopic resins, they are a superior alternative to oven drying in performance, energy as well as labor inputs. For Hot Air Dryer larger than 400 kg/hr. it is available a different series, know as HAD (L) Series. For technical specification of HAD (L)
Assured speedy and uniform drying, ensures numerous benefits to the molder like better surface finish, cleaner shop floor, improved quality, increased output, increased profitability, power saving and reduced material handling.
Bry-Air Twin Loader ensures that the material is always available at both the Primary and Secondary receivers. These Loaders are designed for conveying of un-dried and dried material at both points. When the power is switched On i.e. when start key is pressed, the vacuum blower starts and the solenoid valve of primary receiver get energized starting the primary loadings. After completion of primary loading, the solenoid valve of secondary receiver get energized and secondary loading starts. At the same time primary receiver belly dumps material into hopper and a signal goes to the controller for next cycle.
After completion of the both cycles, primary as well as secondary, the controller checks at which station material is required. If primary loader doesnt need more material, the controller will switchover the loading to secondary loader and vise-versa. If both station do not require material, after a set delay time vacuum blower stops. Whenever the material is required by any station, the blower starts again and work as per the above sequence.
The three combinations available in twin loader are:
High performance plastics require precision and accuracy in all phases of production. Even the slightest deviation from the prescribed ratio of materials leads to products that are unusable and thus further leads to huge overhead expenses.
Gravimetric Blending Units solve this problem by automatically weighing multiple components to produce the exact blend of materials necessary to create a high-quality product every time with consistency. A Gravimetric Blending Unit is essential to get the most out of blow moulding, plastics extrusion, and injection molding processes.
Industrial Blender (Gravimetric Blending Unit) can be deployed in a variety of ways depending on the type of manufacturing process. Most can be mounted directly on other machines in order to create a seamless production process.
Also, Loaders are often a desirable peripheral for blenders in order to facilitate the loading process and avoid human error or injury.
In any industrial plastics environment, gravimetric blenders are an absolutely essential component of the production process. Their efficiency and easy use facilitate production without rejection, reduce human error and injury, and saves material.
Blend With Bry-AirBry-Airs Gravimetric Blending Units ensures proper mixing of additives and colours of the pellets or blends hence reducing rejections.
The Unit helps in providing the extruder /moulder with the most accurate solution of colours and blend of pellets, resins and master batches with consistency.
The Units can be used as a centralised stand-alone system or it can be machine mounted.
The throughput ranges from 6.8 kg/hr to more than 2268 kg/hr. All models dispense and blend all materials (in granular form) for continuous and unfailing accuracy.
Advantages of Bry-Air Gravimetric Blending Unit
The Bry-Air offer superior quality Mould Temperature Controller BTC series which is designed to maintain constant temperature of Mould during the Moulding process. It is engineered to provide precise temperature control.
This technology is increasingly being used to improve the quality of injection moulded parts and to avoid material wastage during injection moulding start up phase.
Apart from its functioning it has an exquisite appearance and is small in size, also it is convenient for mobility as the unit is mounted on wheels.
Widely demanded in various industries, our range is known for its reliability & accuracy. We provide these in different specifications to meet the diverse demand of customers in different Industries with different application areas worldwide.
The state-of-the-art design of our MouldTemperature Controlleris seen in high quality injection plastic mould like automobile Industry, medical plastic industry, white goods industry etc.
Bry Air Mould Temperature Controller is available in water and oil.The temperature can be maintained between 40 90C in case of water and 40-150C in case of oil.
Advantages of Bry Air Mould Temperature Controller:
The Bry- Air Ecodry Mould Dehumidification System is an example of the innovation, based on market needs.
Bry-Air EcoDryMould Dehumidification System MDS Series is designed exclusively to prevent mould sweating. The Bry-Air Mould Dehumidification System ensures increased production through reduced cycle times.
A chilled water pre-cooling coil combined with the latest in desiccant technology ensures super dry air. This prevents mould condensation on injection moulding machine. Typically, a MDS-3 model Mould Dehumidification System can prevent condensation on moulding machines upto 800 tons.
Features
