Other Products / Services #591776

A Variable Frequency Drive (VFD) is a type of motor controller that drives an electric motor by varying the frequency and voltage supplied to the electric motor. Other names for a VFD are variable speed drive,  adjustable speed drive,  adjustable frequency drive,  AC drive,  microdrive, and inverter. Frequency (or hertz) is directly related to the motor’s speed (RPMs). In other words, the faster the frequency, the faster the RPMs go. If an application does not require an electric motor to run at full speed, the VFD can be used to ramp down the frequency and voltage to meet the requirements of the electric motor’s load. As the application’s motor speed requirements change the VFD can simply turn up or down the motor speed to meet the speed requirement

A molded case circuit breaker, abbreviated MCCB, is a type of electrical protection device that can be used for a wide range of voltages, and frequencies of both 50 Hz and 60 Hz. The main distinctions between molded case and miniature circuit breaker are that the MCCB can have current ratings of up to 2, 500 amperes, and its trip settings are normally adjustable. An additional difference is that MCCBs tend to be much larger than MCBs As with most types of circuit breakers, an MCCB has three main functions :                                

• Protection against overload – currents above the rated value that last longer than what is normal for the application Protection against electrical faults – During a fault such as a short circuit or line fault, there are extremely high currents that must be interrupted immediately.                                        
• Switching a circuit on and off – This is a less common function of circuit breakers, but they can be used for that purpose if there isn’t an adequate manual switch.                                        
• The wide range of current ratings available from molded-case circuit breakers allows them to be used in a wide variety of applications. MCCBs are available with current ratings that range from low values such as 15 amperes, to industrial ratings such as 2, 500 amperes. This allows them to be used in both low-power and high power applications.   

Our Cold Storage Refrigeration System is extensively used for cold storage. Cold Storage Refrigeration System supplied by us is used in frozen food plant, frozen vegetable plant and fish, meat plant. Our Cold Storage Refrigeration System is in compliance with international quality standards that ensure its premium usage, reliable performance and longer working life. Why Our Cold Storage Refrigeration System?

• Reliable performance
• Low maintenance
• Energy saving
• Tough construction

Having associations with vendors of repute and leveraging on our technical knowledge, we are geared up to supply quality and precision Compressor Spare Parts that include refrigeration compressor spares, air compressor spares, air compressor spare parts and refrigeration Compressor Spare Parts. The quality of our Compressor Spare Parts goes beyond the expectations of our clients. By offering tailor made solutions, we cater to individual requirements. Compressor Spare Parts: Brands Available

Colt Super Kirloskar Frick Accel Sabroe Copeland Trane

K.G. Khosla Frick Eclipse Sinco Carrier (Voltas) Tecumseh Amoking

The Air Curtains, such as cold storage Air Curtains create an invisible barrier of high velocity air that provides complete protection against insects, dust, dirt and fumes from infiltrating food facilities and other clean work areas when the doors are open and these are designed for compactness and rigid construction. In other words, our Air Curtains help to create a hygienic atmosphere. The Air Curtains that we offer have a double-ended shaft heavy-duty motor with balanced centrifugal fan on both sides of motor shafts which require negligible maintenance. Our Air Curtains help prevent loss of refrigerated air-reduce humidity. Features & Specifications

• Design : These are designed for compactness and rigid construction. Balanced centrifugal fan wheels are mounted on both sides of motor shafts. Double ended shafts heavy duty motors provided are securely mounted inside the equipment
• Casing : These are fabricated of die formed heavy gauge sheet metal
• Performance : These have been engineered very carefully for noiseless operation and high performance
• Finish : These are nicely painted in different attractive colors
• Easy installation and Fast Servicing : These are very simple in installation. They are bolted to wall with fasteners. The front sheet can be removed for quick servicing. Whether the air curtain mounted inside or outside the exterior wall, the performance is equally effective. These are available for specific design and application

Benefits Of Our Air Curtains

• Constant interior temperature by preventing the entry of hot & cold air
• Eliminate pollution and contamination to improve working conditions
• Eliminate need of expensive flapper doors of canvas curtain

The standard line of units in the catalog are high velocity units, characterized by unequal compactness non turbulent air flow, even air distribution and free operation at an economical cost. Super Air Curtains create an invisible barrier of high velocity air to provide complete protection against insects, dust, dirt and fumes from infiltrating foods facilities and other clean work areas when the doors are open. Air Curtains provide constant interior temperature by preventing the entry of hot and cold air. Our Air Curtains eliminate pollution and contamination to improve working conditions. Air Curtains also prevent loss of refrigerated air-reduce humidity. Air Curtains supplied by us eliminate need of expensive flapper doors of canvas curtains. Technical Data

• Model HP Door Size RPM
• KFA - 4214 1/3 42" x 75" 1400
• KFA - 4814 1/3 48" x 75" 1400
• KFA - 4228 0.75 42" x 96" 2800
• KFA - 4828 0.75 48" x 96" 2800

Applications

Meat, Poultry & Fish Processing Wineries Restaurants Breweries Dairies Canneries Bakeries

Hotels Cold Storages Cinemas Hospitals Frozen Food Plants Research Laboratories

Our Touch Screen PLC Panels are known for their accuracy and user friendly operation. We can provide customized Touch Screen PLC Panels to suit the requirements of our esteemed clients who have different kinds of plants. Our Touch Screen PLC Panels are fully automatic and have wide applications in numerous fields. Our best quality Touch Screen PLC Panels range is available with us at market leading prices. Our Touch Screen PLC Panel Is Known For

• User friendly display
• Easy operation
• Durability
• Cost effectiveness

We offer Liquid Overfeed System in different sizes as per the requirement in Ammonia Plant. Liquid Overfeed Systems (re-circulation system) are those in which excess liquid is forced, mechanically or by gas pressure, through organized-flow evaporators, separated from the vapor, and returned to the evaporators. This ensures no oil in the evaporators and no liquid slugs in the compressor leading to high saving in power and maintenance. We present carefully designed Liquid Overfeed System in domestic as well as international markets. Positioned as one of the leading Liquid Overfeed System Suppliers, we offer them at reasonable prices by us. Advantages

• Even refrigerant distribution
• Protection of compressors
• Hot gas defrosting
• No effects of fluctuating ambient and condensing conditions
• Zero pressure drops in the evaporators / overfeed lines
• Ease of operation
• Low maintenance

Materials Used

• Steel Tube
• Pipe
• Channel
• Angle
• Seamless pipe
• Shell
• Laval gauge
• Liquid pump
• Valve flow control

Attributes

• Compact design
• Power saver
• Fully automatic operation
• Truck size plant
• Easy transportation

Applications

• Cold Storage
• Ammonia refrigeration plant

We ensure that the payment procedures we undertake are completely secured. Cash payments and bank transfers are some of the modes of payment that we accept.If buyers are interested in attaining Air Cooling Unit at the lowest prices, our organization is the products' established supplier.

Nitrile rubber insulation is a very versatile and flexible insulation. It is widely used the Industrial insulation, air-conditioning, plumbing and Hvac industries. It is a closed cell elastomeric insulation and is resistant to water vapour, oil and most acids.     

                                                               
Applications :                                                    

• Refrigeration pipe work, heating and ventilation pipe work, airconditioning pipe work.  Heating and ventilation ductwork systems.            
• Vessels and curved or irregular surfaces          
• Thickness and Density Range pipe insulation - 10, 13, 19, 25 and 38m Sheet insulation - 3, 6, 10, 13, 19, 25, 38 and 50mm 
• Roll insulation - 10, 13, 19, 25, 38 and 50mm

Power factor is the ratio between the KW and the KVA drawn by an electrical load where the KW is the actual load power and the KVA is the apparent load power. It is a measure of how effectively the current is being converted into useful work output and more particularly is a good indicator of the effect of the load current on the efficiency of the supply system.

 

All current flow causes losses both in the supply and distribution system. A load with a power factor of 1.0 results in the most efficient loading of the supply. A load with a power factor of, say, 0.8, results in much higher losses in the supply system and a higher bill for the consumer. A comparatively small improvement in power factor can bring about a significant reduction in losses since losses are proportional to the square of the current.When the power factor is less than one the ‘missing’ power is known as reactive power which unfortunately is necessary to provide a magnetizing field required by motors and other inductive loads to perform their desired functions. Reactive power can also be interpreted as wattles, magnetizing or wasted power and it represents an extra burden on the electricity supply system and on the consumer’s bill.

 

Specifications :

• A poor power factor is usually the result of a significant phase difference between the voltage and current at the load terminals, or it can be due to a high harmonic content or a distorted current waveform.
• A poor power factor is generally the result of an inductive load such as an induction motor, a power transformer, and ballast in a luminary, a welding set or an induction furnace. A distorted current waveform can be the result of a rectifier, an inverter, a variable speed drive, a switched mode power supply, discharge lighting or other electronic loads.
• A poor power factor due to inductive loads can be improved by the addition of power factor correction  equipment, but a poor power factor due to a distorted current waveform requires a change in equipment    Design or the addition of harmonic filters.
• Some inverters are quoted as having a power factor of better than 0.95 when, in reality, the true power factor is between 0.5 and 0.75. The figure of 0.95 is based on the cosine of the angle between the voltage and current but does not take into account that the current waveform is discontinuous and therefore contributes to increased losses.
• An inductive load requires a magnetic field to operate and in creating such a magnetic field causes the current to be out of phase with the voltage (the current lags the voltage). Power factor correction is the process of compensating for the lagging current by creating a leading current by connecting capacitors to the supply.
• P.F (Cos Ǿ)= K.W / KVA  Or
• P.F (Cos Ǿ)=  True Power / Apparent Power.
• KW is Working Power (also called Actual Power or Active Power or Real Power).
• It is the power that actually powers the equipment and performs useful work.
• KVAR is Reactive Power.
• It is the power that magnetic equipment (transformer, motor and relay)needs to produce the magnetizing flux.
• KVA is Apparent Power.
• It is the “vectorial summation” of KVAR and KW.

We supply best quality Ammonia Pressure Vessel. The Ammonia Pressure Vessel is manufactured in line with the industry standards. Ammonia Pressure Vessels that we offer are made of tough materials resistant to chemical attack and temperature extremities. The specification and technical details of our Ammonia Pressure Vessel are given below: ReceiverReceivers are available in 26 standard models with an internal gross volume of 4.4 to 329.1 cubic feet and a pump down capacity of 130 to 9740 pounds based on 80% of internal volume with liquid refrigerant at 90deg F. Ammonia or fluoridated receivers are made from carbon steel shell and carbon steel dished ends. Shells upto 300 mm (12") are made from seamless or welded pipes and above 300 mm, they are made from rolled plates. StandardsAll receivers are manufactured and tested as per the following standards:

• ASME Sec. VIII
• ASME Sec. XI
• IS:2825

RangeThe diameter varies from 200mm (8") to 1200mm (48") and the lengths vary from 1.5 Meters (5') to 7.5 Meters (25'). Oil SeparatorOur scrubber type oil separators are designed for vertical mounting in the compressor discharge line of commercial and industrial refrigeration systems to separate entrained oil from the discharge gas and a automatically return this oil to the compressor crankcase. Oil separators are made from carbon steel shell and carbon steel dished ends. Shells upto 300 mm (12") are made from seamless or welded pipes and above 300 mm. They are made from rolled plates. All oil separators are manufactured and tested as per the following standards:

• ASME Sec.VIII
• ASME Sec.XI
• IS:2825

RangeTwo types of oil separators are available, one with automatic oil return and other without automatic oil return. The diameters vary from 200 mm (8") to 600mm (24") and lengths vary from 1 meter (3') to 1.5 Meter (5'). Vertical AccumulatorThese are made from Carbon Steel / low temperature plate shell and carbon steel/low temperature steel dished ends. Shells upto 300mm (12") are made from seamless / welded pipes and above 300 mm are made from rolled plates. StandardsAll accumulators are manufactured and tested as per the following standards:

• ASME Sec. VIII
• ASME Sec. IX
• IS:2825

RangeThe diameters range from 250mm(10") to 600mm (24") and lengths vary from 1 Meter(3") to 1.8 Meter(6"). Horizontal AccumulatorThese are made from carbon steel / low temperature steel plate shell and carbon steel / low temperature steel dished ends. Shells upto 300 mm (12") are made from seamless / welded pipes and above 300mm are made from rolled plates. RangeThe diameters range from 250mm (10") to 600mm (24") and lengths vary from 1 Meter (3") to 1.8 Meter (6").

We trade in a wide assortment of Ammonia Valves such as Tee Valves, Safety Valves, Gauge Valves and many more. These Ammonia Valves are made in adherence to the industry recommended standards. The Ammonia Valves have numerous industrial application areas. We can offer standard as well as customized Ammonia Valves which helps us cater to even larger number of clients in various industries. Detail

• Working Media : Ammonia, Freon, Ref. machine oils, neutral gaseous & liquid media

We bring forth high performance Chiller Condenser to meet requirements of our clients. Our Chiller Condensers are in accordance with highest quality standards as they are obtained by us from ISO certified vendors. Chiller Condenser supplied by us is widely demanded for its excellent performance, long working life and great efficiency that ensures total value for your money. Our Chiller Condenser Is Used In

• Ammonia plant
• Refrigeration plant

Ice Making Plant offered by us is in accordance with the highest industrial standards. Our Ice Making Plant is fully automatic and is equipped with vital features for low maintenance, energy savings and longer working life. Ice Making Plant can be easily transported on a truck because of its compact design. One can avail highly functional Ice Making Plant from us at competitive prices. Industries Benefitting From Our Ice Making Plant

• Pharmaceuticals
• Pesticides
• Fertilizers
• Sugar mills

PLC- Programmable Logic Controllers are extensively used in all type of industries Considering the preference of client from view of past experience, availability of support  we offer our client any make of PLC such as Siemens, Allen Bradley, GE Fanuc, Mitsubishi, Schneider for making of PLC based control system Panels / Enclosures. Also wide range of MMI are used in combination of above PLCs these include Siemens, Allen Bradley GE Fanuc, Mitsubishi, Schneider. We provide complete solutions for the process control and other applications right from Designing, Drawing approval, manufacturing and commissioning. Our engineering team is capable of providing support for end  to end solutions.

We supply a wide assortment of Cold Storage Door Lock Hinges. Since these Door Lock Hinges are required for cold storage, our ready to fit Door Lock Hinges are offered in standard sizes. Our Door Lock Hinges are duly fitted in outer frame. These are offered with complete lock sets and hinges and are properly insulated to prevent heat loss. The Door Lock Hinges supplied by us are fabricated from malleable castings that provide high degree of strength and it is coated with a special paint to prevent rusting. Door Lock Hinges are specially designed and developed with best available materials. Their special designs make them tough and rugged for any kind of cold storage doors. Sizes Available

• 2100mm x 900mm
• 1200mm x 750mm

Specialties

• Precise designs
• Versatile application areas
• Corrosion free
• Durable

Liquid Ammonia Pumps are used for liquid refrigerant re-circulation systems with one or two main accumulators. These Liquid Ammonia Pumps are developed keeping in view the Indian atmosphere and operating conditions. The Liquid Ammonia Pumps have fully compatible graded cast iron body with versatile impeller shaft and a reliable mechanical seal constitute the main parts of this Liquid Ammonia Pump. The design is rugged and is conducive to smooth and silent running. Being open type, our Liquid Ammonia Pumps are easy to operate and maintain and are backed up by our country wide after sales network. Features

• Rugged graded close-grained cast iron body for cryogenic applications
• Even balanced special design impeller
• Open type for easy and low maintenance
• Graded steel shaft
• Twin seal assembly

We are a well-known Supplier of Tube Ice Plant. Our Tube Ice Plant is obtained from our trusted vendors and thus, assured quality is offered to our esteemed clients. Tube Ice Plant is our quality certified product and is preferred in the market because of its durability, low maintenance and easy operation. Industries like Pharmaceuticals, Fertilizers, Chemicals, etc. are benefitting greatly from our Tube Ice Plants. Furthermore, we supply Tube Ice Plant at reasonable rates in the market. Attributes

• Fully automatic
• Power saving
• Easy installation
• Easy maintenance

We offer premium grade Monoblock Brine Agitators that are obtained by us from trusted and quality certified companies. We offer Monoblock Brine Agitators in various sizes and models with a view to meet the needs of our clients. Our Monoblock Brine Agitator is an ice making equipment that is made up of high quality white metal bearings and water seals. Highlights

• Directly driven by motor
• High performance capacity
• Corrosion resistant and food grade quality parts
• Durable

We are offering gas coolers and liquid coolers are available with us in ten standard sizes through a capacity range of 15 to 1000 tons of ammonia refrigeration. Designed for installation in the booster discharge line, the gas and liquid coolers sub cools liquid ammonia from the receiver for the low stage load while super heating booster discharge gas to the high stage compressor. Superheat of booster discharge gas is necessary to prevent overheating of the high stage compressor. Sub cooling of liquid refrigerant for the low stage load is essential to obtain economical thermodynamic efficiency of the refrigeration cycle. Our gas and liquid coolers perform both these functions efficiently. why our gas and liquid coolers?

• energy saving
• user friendly operation
• durable
• quality certified

We offer Milk Chilling Plants that are well-equipped with features for excellent durability, efficiency and longer service life. We obtain Milk Chilling Plant from ISO certified companies in order to offer you the best quality equipment. Our Milk Chilling Plant is widely used in milk dairies, ice cream parlors and butter plant. Highlights

• Power saving
• Demands low maintenance
• Easy to set up
• User friendly operation

Now purchase Condensing Unit at highly affordable prices from us. We are its well-known supplier in the country. Carrying out systematic quality process at every stage, we keep our quality standards high to gain customers' satisfaction.

For ensuring quality products at buyer's end, we check each and every product at diverse stages including production, packaging and delivery. Located in Mathura(India), our company is involved in making available wide array of products that are in conformance with the industry standards.

As, our products are manufactured following guidelines set by international quality managements systems, they are of unmatched standards. We are listed amidst the emerging Suppliers of Ripening Chamber and have been serving markets with the premium products.