The Restaurant fire suppression system is a pre-engineered, wet chemical, cartridge-operated, regulated pressure type with a fixed nozzle agent distribution network. It is listed with Underwriters Laboratories, INC (UL/ULC).

The system is capable of automatic detection and actuation and/or remote manual actuation. Additional equipment is available for mechanical or electrical gas line shut-off applications.

The detection portion of the fire suppression system allows for automatic detection by means of specific alloy rated fusible links, which, when the temperature exceeds the rating of the link, the link separates, allowing the regulated release to actuate.

The FM-200* Total Flooding Fire Suppression System is an engineered system utilizing a fixed nozzle agent distribution network. The system is designed and installed in accordance with the National Fire Protection Association (NFPA) Standard 2001, Clean Agent Fire Extinguishing Systems. When properly designed, the FM-200 system can suppress a surface burning fire in Class A, B, and C hazards.

The firefighting ability of the FM-200 system is achieved through 80% heat absorption and 20% direct chemical means (action of the fluorine radical on the chain reaction of a flame). Fire suppression using the FM-200 system has the following advantages:

A fire sprinkler system is an active fire protection method, consisting of a water supply system, providing adequate pressure and flow rate to a water distribution piping system, onto which fire sprinklers are connected. Although historically only used in factories and large commercial buildings, systems for homes and small buildings are now available at a cost-effective price.[1] Fire sprinkler systems are extensively used worldwide, with over 40 million sprinkler heads fitted each year. In buildings completely protected by fire sprinkler systems, over 96% of fires were controlled by fire sprinklers alone.

Each closed-head sprinkler is held closed by a heat-sensitive glass bulb. A sprinkler activation will do less water damage than a fire department hose stream, which provide approximately 900 liters/min (250 US gallons/min). A typical sprinkler used for industrial manufacturing occupancies discharge about 75-150 liters/min (20-40 US gallons/min). However, a typical Early Suppression Fast Response (ESFR) sprinkler at a pressure of 50 psi (340 kPa) will discharge approximately 380 liters per minute (100 US gal/min). In addition, a sprinkler will usually activate within one to four minutes of the fire's start, whereas it typically takes at least five minutes for a fire department to register an alarm and drive to the fire site, and an additional ten minutes to set up equipment and apply hose streams to the fire. This additional time can result in a much larger fire, requiring much more water to extinguish.

A fire extinguisher is an active fire protection device used to extinguish or control small fires, often in emergency situations. It is not intended for use on an out-of-control fire, such as one which has reached the ceiling, endangers the user (i.e., no escape route, smoke, explosion hazard, etc.), or otherwise requires the expertise of a fire department. Typically, a fire extinguisher consists of a hand-held cylindrical pressure vessel containing an agent which can be discharged to extinguish a fire. Fire extinguishers manufactured with non-cylindrical pressure vessels also exist, but are less common.

MAP (Mono Ammonium Phosphate) range of ABC extinguishers are effective against Class A, B and C fires as well as Electrical fires. Easy to use, as it has a safety seal which can be broken in seconds. Having a pressure gauze, which shows the readiness of the fire extinguisher. The squeeze grip Lever mechanism allows the user to control the discharge and optimise use of the extinguisher. ISI Marked

CO2 extinguishers are the perfect weapon against large, hard to fight Class B and C fires. CO2 extinguishers offer higher storage capacity than regular sized CO2 extinguishers. The squeeze grip activation feature ensures that the extinguisher can be activated rapidly in an emergency.

A fire alarm system has a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present. These alarms may be activated automatically from smoke detectors, and heat detectors or may also be activated via manual fire alarm activation devices such as manual call points or pull stations. Alarms can be either motorized bells or wall mountable sounders or horns. They can also be speaker strobes which sound an alarm, followed by a voice evacuation message which warns people inside the building not to use the elevators. Fire alarm sounders can be set to certain frequencies and different tones including low, medium and high, depending on the country and manufacturer of the device

We have three types of fire alarm system:

• Conventional


• Addressable


• Wireless

Fire Fighting Hydrant Systems are the most commonly used systems, in many residential and industrial projects. If you have ever seen a Red color pipe, circulating around a building or factory, you have seen a Fire Hydrant Pipe. In most news clippings about a fire, you can see a fireman shooting water up to 8stories high or more, that fire man is using the Fire Hydrant System. Such is the power of the Fire Hydrant System that water can be shot right up to 8 floor, directly into the fire.

The Hydrant System comprises of AC motor driven pump sets with all required accessories including valves, instrumentation and controls etc. Complete in all respects. An automatic hydrant system is furnished covering the areas completely from independent.

Pipe work from the fire water pump set. The hydrant pipe work is remaining pressurized through the proposed jockey pump taking care of any leakages in the system pipe lines, valves and fittings.

Now a days Short Circuit in Electrical Panel is the biggest reason for big, fatal fires in most of the premises. Such kind of short circuits occurs mostly inside the electrical panels as this is where high voltage lines terminate. In frictions of seconds, the smallest spark turns into a flame and then it turns into flaring blaze in few minutes. People Lives are lost and properties are devastated.

We have designed a Tube Based Fire Suppression System to fight with fire that occur in the micro environment of electric panels. This system is a self-activating suppression system that reliably suppresses fires in seconds. This system uses polymer heat sensing tube that will rupture when exposed to a flame. This specialized detection tubing combines leak resistance, flexibility, durability and precise temperature sensitivity, allowing it to react quickly when the heat from a fire is present.

Escape route signs shine brightly through smoke and darkness, showing the route to the nearest exit, pointing you to emergency equipment and clearly marking all safe exits. We offer a wide range of designs and features for exit signs. We provide an attractive yet easy-to-install universal edge-lit exit sign.

Evacuation plans are a fundamental complement to safety signs They illustrate the evacuation route and building layout and help to educate users of a building in the correct actions to adopt in an emergency situation. Evacuation plans are installed near the main entrances and access points to the building, halls and corridors, reception areas where users may congregate for some time.

Self-powered Standard Exit Series provides the ideal exits for general purpose applications. An extensive range of field-installed accessories, choice of faces, and a variety of mounting configurations permit the tailoring of the basic exit for almost any application. This exit features durable construction, attractive styling, and high-efficiency illumination.