GST : 27AAACB5489M1Z5
4.5/5
Our Products
Our product range contains a wide range of Paint Booth Additive
B-Gaurd is an alkaline formulation, liquid preparation, to be used as an additive for the water treatment in the spray booths. It is very effective where mixed paints are used. The effect of B-Gaurd on the over sprayed paint, make sure that the washing chambers, plates and pipe work of the spray booth require less frequent cleaning and the over sprayed paint will float in a conventional denatured non - sticky form for easy removal.
Whenever you start a fresh bath make sure that you clean the booth and the sludge pit thoroughly. Fill the booth tank with fresh industrial water and start the circulation. B-Gaurd then added to the turbulent area of the reservoir at 1-2 litres per 1000 lts of water in the tank. This addition will give a pH of around 10. This pH will start dropping from the time the paint over spray is mixed with that.
To get the best performance of B-Gaurd the pH must be maintained between the range of 9-10. To maintain the pH, regular replenishment should be made. Its normally assumed that there will be a 40% overspray paint contamination in the booth water. The recommended doses are @ 3-5 % of spray viscosity paints consumption.
L) Diaphragm Pump:
In fluid transfer technology, we are the leading Supplier and Installer of Industrial Diaphragm Pump. We supply Air Operated Diaphragm Pump of Aluminium, Polypropylene and Stainless Steel Material of Construction from 10 mm ( 3/8” ) size to 50 mm ( 2” ) size.
Bullows AODD pumps are safe-efficient-reliable and any broken parts can be easily replaced with genuine spares. As a result, they are used in a wide range of industries to handle different materials such as chemicals, crude oil, mining, food, beverage, paints and many more. We supply these diaphragm pumps to customers at reasonable market price.
Salient Features:
Easy to operate
Intrinsically Safe
Long Service life
Ease of Maintenance
Excellent functionality
High Operational fluency
Sturdy & Leak Free Design
TECHNICAL SPECIFICATION
| Sr. No. | Models | Inlet/outlet | Max flow rate | Flow each cycle | Suction lift Capability | Weight | Max. Pump Speed |
|---|---|---|---|---|---|---|---|
| 1 | BD 36 LPM | 3/8” NPT | 36 Lpm | 0.08 L | 6.4 m Primed : 3.7 m Dry | 4 kg | 500 cpm (Idle) |
| 2 | BD 48 LPM | 1/2” NPT | 48 Lpm | 0.15 L | 6 m Primed : 3.7 m Dry | 4.5 kg | 400 cpm (Idle) |
| 3 | BD 90 LPM | 3/4” NPT | 90 LPM | 0.225 L | 6 m Primed : 4.5 m Dry | 8 kg | 400 cpm (Idle) |
| 4 | BD 180 LPM | 1” NPT | 180 LPM | 0.45 L | 6 m Primed : 3.7 m Dry | 9.5 kg | 400 cpm (Idle) |
Mr. Vijay Bhushan (Bullows Paint Equipment Private Limited)
1st Floor, Gat No 94/1, Jyotiba Nagar, Talawade, Pune, Maharashtra - 411062, India
https://www.spraypaintbooth.in
Share us via
