Our Products
Features :
Available in Polycarbonate (PC) and Urea material
White and Ivory finishes for Penta PC range
Ivory and Brown finish for Penta Urea range
Attractive design and highly durable.
Product adhering to BIS Standards
Complemented with several General Accessories.
Features :
Available in Polycarbonate (PC) and Urea material
White and Ivory finishes for Penta PC range
Ivory and Brown finish for Penta Urea range
Attractive design and highly durable.
Product adhering to BIS Standards
Complemented with several General Accessories.
Motor power 1.300 W, Max. pressure 110 bar, Max. operating flow 330 l/h, Max. flow temperature 40 C, Weight (without accessories) 3, 8 kg Functions, Power input Click and Go quick-connect SDS fittings Self-priming Comes complete with Fixed Jet-Fan nozzle Lance (F 016 F04 462) Transparent water filter (F 016 800 363) 3 m high-pressure hose (F 016 F04 583) 450 ml high pressure foam nozzle
Width of cut 38 cm, Cutting system Cylinder blades (5 blades), Weight 7.5 kg, Height of cut 15 43 mm, Height-of-cut settings Continuously variable Lower blade setting Click lock, 6 Months Warranty
Rated power input: 550 W, Impact energy: 1, 6 J, Impact rate at rated speed: 0 - 3900 bpm, Rated speed: 0 - 1550 rpm, Weight without cable: 2.2 kg , Max. drilling diameter in steel / wood: 13 / 30 mm, 6 Months Warranty
Rated power input: 600 W, (1) No-load speed: 0 rpm, (2) No-load speed: 16000 rpm, No-load speed: 0 - 16000 rpm, Dimensions without nozzle LxH: 300 x 200 mm, Dimensions (with nozzle): 280 x 150 x 200 mm, Volumetric flow rate: 3.3 m/min, Power cord length: 3 m, Weight without cable: 1.7 kg, 6 Months Warranty
Temperature Low 50-550deg, Temperature High 50-650deg, Air Volume Low 210-250 l/min, Air Volume High 340-380 l/min Power Input 2000W, Net Weight (w/o Wheel) 0.9Kg, No Warranty
Electrical helmets are designed for protection against accidental falls and protection from falling objects and additional protection from overhead live wires while working on live lines. They should be made up of HDPE material and have an aerodynamic design and weigh not more than 325 gms (approx.) The helmet size should be in between 520 to 600 mm and have a 4 / 6 point suspension made out of good nylon / pp material. It should have a soft PU material sweat band for absorbing sweat while in use. It should be provided with a chin strap not more than 19mm in width to hold the helmet in place at the chin side. Both sides of helmets should have Night Glow reflective tapes to facilitate night time identification. It should be certified to conform to ANSI / ISEA Z89.1-2009 for Electrical Insulation and meet IS 2925: 1984 for Head protection
Dielectric over boots are designed to give insulation property but maintaining the convenience of wearing regular safety shoes. An electrically insulating dielectric overboot approved to current European standards with a vulcanized rubber sole for superior slip resistance. The Respirex dielectric boot provides protection of up to 20kV over the complete boot for 8 hours. Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
OSWAL MAKE 0.37KW 0.5HP THREE PHASE SQUIRREL CAGE INDUCTION MOTORS FOM-CUM-FLM MOUNTED B-35-TEFC 1000 RPM (6POLE) OM-53-FOM-FLM ENCLOSURE CONFIRMING TO PROTECTION IP 55 HORIZONTAL FOOT-CUM-FLANGE MOUNTED (B-35), CONTINUOUSLY RATED(S1) SUITABLE FOR OPERATION ON 415+/-10% V, 3 PHASE 50 HZ +/- 5% SUPPLY WITH AMBIENT 50C, CLASS F INSULATION WITH TEMPERATURE RISE LIMITED TO CLASS AND ALTITUDE LESS THAN 1000 M.S.L.
ABB MAKE 0.37 KW 0.50 HP FRAME-M2BA71B4 RPM-1500 4 POLE TOTALLY ENCLOSED FAN COOLED HORIZONTAL FOOT MOUNTED SQUIRREL CAGE INDUCTION TYPE MOTOR EFF:- IE2. Enclosure conforming to Protection IP55 , Continuosly rated suitable for, operation on 415V, 3 phase, 50 Hz AC Supply with class 'F' insulation for 50 Deg.C & altitude less than 1000M above MSL & conforming to IS:325-1996. (Standard Paint Shadeas)
Available in Polycarbonate (PC) and Urea material
White and Ivory finishes for Penta PC range
Ivory and Brown finish for Penta Urea range
Attractive design and highly durable.
Product adhering to BIS Standards
Complemented with several General Accessories.
Features :
> CE compliance as per latest IEC 61010-1
> 50Hz or 60Hz
> AC or DC control power
> LED indicators for phase identification in 3-ph meters
> Plus all features of Conzerv range DM3000 / DM1000
Solar LED Street Light Luminary 6W, 12V DC , With Inbuilt battery charge controller, Inbuilt dusk to dawn controller
Solar power generator, with 10Wp PV Module, 3W x 2 nos LED Lamp 12V DC, Inbuilt mobile charger with 5 in 1 mobile charger cord, AC Charging adaptor etc.
Features :
Maintenance Free
Compact Design
Can be mounted in any position
High Dielectric strength & Tracking Index
Can withstand mechanical stresses during fault condition
Continuous Thermal current - 120% Rated Primary Current
Application :
Metering
Protection
Revenue
Core Balance
Indicaiotn
Summation
Auxiliary
Interposing
Neutral Displacement
Differential Protection
Meter & UPS manufacturer
Motor/ Power Control Center
For switching an electric circuit (lighting, heating) ON or OFF at selected times during a pre-programmed time period
Temporary (automatic return) or permanent (forced switching ON or OFF) override on output
For autonomous control of outdoor illuminations
Automatic programming: simply initialise the products for the location with no need to install a photoelectric cell
Programmed directly on keypad, or using programme transfer key Cat.No 4 128 27
High precision clock: 0.2 sec per day
9V DUAL DISPLAY FOR TEMPERATURE & HUMIDITY MEASURES TEMPERATURE IN C/ F DEW POINT AND WET BULB FUNCTION MAX MIN/MAX-MIN/AVG & HOLD FUNCTION ACCURATE NTC SENSOR & QUICK RESPONSE RH SENSOR DISPLAY BACK-LIGHT EXTERNAL PROBE WITH 2 METERS WIRE LENGTH WHEN FULLY STRETCHED LOW BATTERY INDICATION AUTO POWER OFF
0.5% DATA HOLD FUNCTION LOW BATTERY INDICATION DATA HOLD FUNCTION BATTERY CONSUMPTION APPROX. 6.5mA LOW POWER CONSUMPTION IT IS USED THE MICROCOMPUTER (CPU) TECHNIQUE TO MEASURE QUICKLY, ACCURATELY STANDARD 9V BATTERY
Features :
Bus bar Chambers are available from 63 Amps to 600 Amps.
Enclosures are made from CRCA Steel and Coated with rust free Powder Coating for long life.
Stripes are made of Electrolytic Copper.
A thickness of the Copper Stripe increase in Parallel to Amp.
Features :
Aesthetically pleasing grey colour Internal Sliding Knob/ Latch
Easy removal of front doors/ change for left or Right
Gland Plates at top and bottom are removable for ease of use in entry and termination of cables
Clear embossed earthing marking for ease of installation
Cement guard are provded to restrict the entry of plaster or any foreign particles before installation of DB's at constructin stage
Identification labels are proveded for circuit
Gasket are provded to ensure Weather- Proof conditions.
Rmoval of front plate for easy maintenance
Optimized dimension ensur enough wiring space for easy cabling and maintenance
DIN Channel is provided with stoppers at the corner for avoiding slippage of devices
All distibution boards are supplied with insulated pin type copper busbar rating up to 200 A and Neutral bar
Feature :
No Corrosion
UV Resistant
Easy to Install
Cost Effrctive
Durability
Fire Resistance
Light Weight
No Maintenance