Router, Cables & Networking Devices #7250056

All ports F-(f) connector, 75 Ohm This 4 Way splitter easy to use with Cable TV distribution, All 4 ports are power pass with 1 input. You can also use LNB signal distribution in multi Set-top box connection Features: Zinc Die-cast housing, nickel-plated Easy installation with two edge hole sites Screening factor: 5-2400 MHz >100dB Low insertion loss High insloation Perfect performance index Designed for SATV/CATV Power passing 24V 0.8A (MAX.)

The TL-SG1008D 8-port Gigabit Ethernet Switch provides you with a high-performance; low-cost; easy-to-use; seamless and standard upgrade to improve old network to 1000Mbps network. Increase the speed of your network server and backbone connections; or make Gigabit to the desktop a reality. Total Number of Network Ports: 8 Port/Expansion Slot Details: 8 x Gigabit Ethernet Network Ethernet Technology: Gigabit Ethernet; Fast Ethernet Network Technology: 10/100/1000Base-T Layer Supported: 2 Manageable: No Power Source: AC Adapter Form Factor: Desktop; Wall Mountable Height: 1.1 Width: 7.9 Depth: 5.5. Genuine Imported Products from USA.

optilink / o vision gold plc cassate sc/apc -sc/upc 1x2 is 1x2 plc splitter cassette type, smf-28e fiber, od:2.0mm pigtail, 1m length, without connector or with (sc/apc or sc/upc) connector features: ftth monitoring catv system network protection access/pon distribution

3-way splitter supports frequencies from 5 to 900 MHz. The power passing port allows power to pass through the splitter to power in-line amplifiers and pre-amplifiers. Use this 3-way coaxial cable splitter for any residential or commercial cable installation.

SIGNAL SPLITTER 2 WAY ALL PP is a2 Way CATV trunk splitter, 5-1000Mhz, RFI>110dB, all ports power pass 10A, UNEF 5/8" port and type of CATVCable TelevisionEquipment. Used for Signal Transmitting Device.Frequency Range is 5-1000 MHz, Impedance 75ohm and Current Capacity 15Amps, 60VAC

SIGNAL SPLITTER 4 WAY is a field trunk of CATV, good waterproof design. 75, 5/8KS-F trans-connector available.Adapt to 5-900MHZ. It has Metal isolation netting, prevention of RF interference, good shield function. Pass power:10A AC/DC. having C Wave Range Program Application: Industrial, Commercial, Residential / General-Purpose

4 way Tap off with Power Pass is used to distribute your cable TV signal for one TV. 4 way Tap off will give two output signals from which TAP signal will use for user application and another output signal is passed to next unit for more distribution of signal. 4 way Tap off will work in between 5 to 1000MHz frequency. features: Tape off 4 way 5-1000 MHz Power Pass T-4 Digital signal transmission High Linearity Low Insertion Loss Impedance 75 High Isolation Die cast alloy Housing Rust proof Brass F connectors

1x8 PLC Splitter divides or combines a signal to 8 outputs. Planar lightwave circuit (PLC) splitter is a optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. Cable Length: 1 Meter Connector Type: 1X8 Fiber Optic

PLC splitter has no connector at the bare fiber ends. It can be spliced with other optical fibers in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation. It is commonly used for FTTH, PON, LAN, CATV, test equipment and other applications. 1x16 PLC Splitter divides or combines a signal to 16 outputs.

O-VISION GOLD MEDIA CONVERTOR DUAL FIBER (MM GIGA) is a fiber media converters. The fiber ports can be configured to provide 1:1 uplink protection. provide flexible connectivity to Fast Ethernet or Gigabit networks, and simplifies inventory management in large Enterprise and Telecom networks with multiple data rates. to facilitate quick fault detection, isolation and reporting.

PLC splitters are used to provide a compact and reliable method to split the optical signal.It is an ideal solution for passive opticalnetworks. They have excellent uniformity and low PDL and can be supplied in a range of packaging options. Material Fiber Size 1310 to 1660 Operating Temperature -40 to +85

1x16 Fiber Optic Planar Lightwave Circuit (PLC) Splitters allow a user to split a single input signal evenly into 16 output signals, which is ideal for passive optical networks (PON) and other high-channel-count applications. Cable Diameter: 1 Meter Connector Type: 1X16 Fiber Optic

PLC splitter has no connector at the bare fiber ends. It can be spliced with other optical fibers in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation. It is commonly used for FTTH, PON, LAN, CATV, test equipment and other applications. Fiber Type: SM Material: Fiber Usage/Application: FTTH Color: Single or Multicolour Connector Type: No Connector

PLC splitter has no connector at the bare fiber ends. It can be spliced with other optical fibers in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation. It is commonly used for FTTH, PON, LAN, CATV, test equipment and other applications. 1:4 PLC Steel Tube Splitter without Connectors Material Fiber Application: FTTH Ideal For: FTTH

PLC splitter has no connector at the bare fiber ends. It can be spliced with other optical fibers in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation. It is commonly used for FTTH, PON, LAN, CATV, test equipment and other applications. 1x8 PLC Splitter divides or combines a signal to 8 outputs.

SIGNAL 1 WAY TAP ALL POWER PASS is a CATVCable Television Equipment type.Its a Signal Transmitting Device with Power Pass 6dB/8dB/12dB. Operating frequency 5-1000MHz.Made by Zinc material

SIGNAL SPLITTER 3 WAY is a Solder back housings, machine threaded, flat F-ports device.Compliant with SCTE splitter guidelines.It has 51000MHz Bandwidth, 120dB EMI. Low insertion losss, High return loss and isolation and CE&ROHS Certified.

5-1000 mhz power pass digital signal transmission high linearity low insertion loss impedance 75 high isolation die cast alloy housing rust proof brass f connectors tape off 2 way for catv signal. Accurately tape off your cable tv. It is designed for even distribution of catv signals. Features: tape off 2 way 5-1000 mhz power pass t-2 digital signal transmission high linearity low insertion loss impedance 75 high isolation die cast alloy housing rust proof brass f connectors

5-1000 mhz power pass digital signal transmission high linearity low insertion loss impedance 75 high isolation die cast alloy housing rust proof brass f connectors tape off 3 way for catv signal. Accurately tape off your cable tv and antenna signal with an advanced 3 way catv. It is designed for even distribution of catv signals. Features: tape off 3 way 5-1000 mhz power pass t-3 digital signal transmission high linearity low insertion loss impedance 75 high isolation die cast alloy housing rust proof brass f connectors

Optical distribution box terminates one fiber optic cable with up to 4 cores, bringing significant improvements resulting in better customer experience when FTTH have to be deployed. Features ABS material used ensures the body strong and light. Easy installations: Mount on wall or just put on the ground. Splicing tray can be removed when needed or during the installation for the convenient operation and installation; Adapter slots adopted No screws needed for installing adapters. Double-layer design for easier installation and maintenances:a.Upper layer for splicing;b.Lower layer for distribution. Cable fixing units(Tie-warps) provided for fixing the input optical cable.

Cisco desktop switches are used to maintain a business network for small companies. It features with unmanaged switches that do not need any configuration, making it easy to install. It provides a highly reliable network connection to connect your computers, printers, scanners, etc. Its complexity less feature makes it easy to use, also it has the ability to expand its network that helps to connect more computers. It weighs up to 458g that can be portable anywhere.

Cable TV main line crossing any home or area and you want give one or two connection then you can use this tap Features: 1-Way Tap Off 1000 MHz Wide Band Splitter 1 Powerpass Out (Cable TV main Line) 1 Cable TV connection Out

Establish wired local network in your office with the D-LINK DES-1008A 8-Port 10/100 Switch The device functions as both a wireless router and an Ethernet switch giving you two different options for internet connectivity. You can either sync this DES-1008A 8-Port 10/100 Switch with multiple PCs for sharing files and folders or sync it to a router for sharing an internet connection over your location. There are a total of 8 LAN 10/100 Mbps LAN Ethernet/Fast Ethernet ports in the device that enable high-speed internet connectivity for seamless online gaming, video streaming or file downloading. The data transfer rate vary with 10 Mbps (half duplex) and 20 Mbps (full duplex) on Ethernet mode and 100 Mbps (half duplex) and 200 Mbps (full duplex) on Fast Ethernet mode. features to provide you snag-free internet connectivity. improved performance in terms of a more fluid and hassle free networking for all the connected devices in your set-up. power saving built-in in this DES-1008A 8-Port 10/100 Switch.

1x4 Standard PLC Splitter in FTTH Solution The standard PLC splitter provides a plug-and-play method for integration in the network, which eliminates any risks during installation. It eliminates the need for splicing machines on the field and there is no need for skilled personnel for deployment. Connector Type 1X4 Fiber Optic

Simplify your concept of using a wired network with this exceptionally designed port switch from D-Link. This high quality 5 port switch has been designed to make your internet connection faster and easier than before. Its 10/100 MBps Ethernet switch helps the user to connect with a network quickly and helps to detect the network speed to make your work and net access experience better. Special features The 5 port design with 10/100mbps speed makes it more useful for the user Fan less design offers a noise free access to this device Simple and compact design helps it to fit in any corner of the room All the ports support automatic MDI/MDIX crossover Each port directly connects to a server, hub, router, or switch by plugging in regular straight-through twisted-pair Ethernet cables