Cable Connector

Sitabuldi, Nagpur, Maharashtra

Material: Carbon steel, Stripping special three-hole segmented design Feature sturdy structure and high rigidity Oal : 148mm Forged with professional process and advanced technology No need to adjust the aperture when using the most rapidly stripping, ergonomically design for convenient holding

event dead zone as lower as 1.5meter combined multi dynamic range and wavelengths multi measurement mode, support touching lcd and pressing keyswarning function could prevent otdr module from being damaged by optical signal in fiber.real time measuring function, convenient to monitor the splicing processintegrated 10mw visual fault locator.

30/32 dB Precise OTDR with Power Meter, Laser & VFL

SUMITUMO Cleavers Blade Compatible with CT-30 CT-20 Fiber Cleavers

high-quality RG6 Coaxial Cable. These are ideally used for satellite distribution, TV antennas, RF and other high-frequency requirements. These are supplied on large scale to various dealers and retailers. These are the best performance, precisely devised, duly verified and provided at optimum market price. Features: Best quality High-in-demand Precisely created

RG-6 is cable TV distribution coax, used to route cable television signals to and within homes, and RG-6 type cables mostly replacing the smaller RG-59, in recent years. RG 6 CCS (copper-clad steel) is center conductor and a combination aluminum foil/aluminum braid shield, typically with low coverage. RG-6 type cables are also used in professional video applications, carrying either base band analog video signals or serial digital interface (SDI) signals.

RG-6 is cable TV distribution coax, used to route cable television signals to and within homes, and RG-6 type cables mostly replacing the smaller RG-59, in recent years. RG 6 CCS (copper-clad steel) is center conductor and a combination aluminum foil/aluminum braid shield, typically with low coverage. RG-6 type cables are also used in professional video applications, carrying either base band analog video signals or serial digital interface (SDI) signals.

RG-6 is cable TV distribution coax, used to route cable television signals to and within homes, and RG-6 type cables mostly replacing the smaller RG-59, in recent years. RG 6 CCS (copper-clad steel) is center conductor and a combination aluminum foil/aluminum braid shield, typically with low coverage. RG-6 type cables are also used in professional video applications, carrying either base band analog video signals or serial digital interface (SDI) signals.

Aluminium opticalNode cum power supply with dual benefit in built 2.5Amp. power Supply with short circuit & overload protection as supply part. This Optical receiver with high-output, high performance, full-featured CATV optical node designed around the very latest optical receiver technology to reliable deliver a full performance of multiplexed video.

Aluminium opticalNode cum power supply with dual benefit in built 2.5Amp. power Supply with short circuit & overload protection as supply part. This Optical receiver with high-output, high performance, full-featured CATV optical node designed around the very latest optical receiver technology to reliable deliver a full performance of multiplexed video.

O-Vision Gold Node Philips IC NXP has prohibitive design costs at ever lower nodes. Run and manage applications without complexity.Chip sales for automotive system.

Optilink DC node 2 Out (6-12V) operates on low power consumption with high output. Good performance, used in CATV networks.Based on SMD technologies.

FTTH optical Receiver with 4 & 8 out operated with POC(power over coaxial), solar and power adaptor, its come with 12V DC adaptor. It has low power consumption with high performance specially designed for small and big network with SMD (surface mount technology) very latest optical receiver technology to reliable deliver a full performance of multiplexed video.

Low power consumption with high output, high. performance, full featured CATV optical node designed around the very latest optical receiver technology with SMD Technology to provide .

DC operated, low power consumption with high-output, high-performance, full-featured CATV battery Back-up optical node. Its SMD design provide high MER and lower BERreliable to deliver a full performance of multiplexed video. The unit is constructed with high quality components to enable it to meet or exceed its performance specifications over a wide temp.range in an uncontrol environment. The unit have Aluminium casing for rust free, and dual side Heat sink for heat dissipation.

DC operated, low power consumption with high-output, high-performance, full-featured CATV battery Back-up optical node. Its SMD design provide high MER and lower BERreliable to deliver a full performance of multiplexed video. The unit is constructed with high quality components to enable it to meet or exceed its performance specifications over a wide temp.range in an uncontrol environment. The unit have Aluminium casing for rust free, and dual side Heat sink for heat dissipation.

VX RG Jointer connects CCTV camera, audio & video cables and dish antenna for matching the transmission line within the whole operating band.

It is a type of power inserter that insert power into a cable in one direction only. So, the DC power only passes through connected cable by using DC inserter. It is used in TV as a tv transmitter stage that adds to the video signal a DC component known as the pedestal level.

Features Designed for Set-up Box protection Works like an AC Stopper Excellent linearity and flatness Ultra low noise technology Designed for Set-up Box protection Works like an AC Stopper Excellent linearity and flatness Ultra low noise technology Smaller size and easier install Build-in filter

13 dbm Transmitter offers great flexibility to meet the demand of todays CATV requirements. It is ideal for offering a combination of analog and digital content. Features: Gain control RF and input level Excellent linearity Convenient maintenance

This Transmitter is based on DFB (distribution feed back) Technology for transmission of optic signal at 1310nm and (optional)1550nm for multi analog and digital channels CATV transmission. The DFB technology withRF PDC (pre-distortion circuit) have been incorporatetop achieve excellent C/N performance for cable TVnetwork. This optivision transmitter have AGC & MGCboth control for easy to handle RF input signal.This transmitter is constructed with SMD technology togive high quality enable it to meet or exceed its performance.

The basic operation of the system consists of optical transmission of signal over a fiber optic cable. The RF analog input signal is converted into an optical signal Dual Power Option. (230V AC & 60V AC/40V AC) Optical Signal Level Indicator. Operating Wavelength 1290nm to 1600nm. Flat Response upto 860 MHz.

Its give both RF as well as optical output.The Transmitter function in this model is designed to give Dual 10dbm optical output where network have only lower opticalthere. This model is economical for small and big networks. The transmission of optic signal at 1310nm and (optional) 1550nmfor carry multi analog and digital channels CATV transmission. This optivision transmitter have MGC (manual gain control)for easy to handle RF input signal. The optivision transmitteris constructed with SMD technology to give high quality enable it to meet or exceed its performance. Its is operated with 12VDC power supply and have very low power consumption.

we are occupied in offering an extensive range of 10+10DBM DUAL SUPPLY with RF in/out Optical Transmitter. R.F. Pre-distortion circuit High-performance DFB Laser to provide high-quality Signal Excellent P/P ratio

Its give both RF as well as optical output. The Transmitter function in this model is designed to give Dual 10dbm optical output where network have only lower opticalthere. The optivision transmitteris constructed with SMD technology to give high quality enable it to meet or exceed its performance. Its is operated with 12VDCpower supply and have very low power consumption.

Its give both RF as well as optical output. The Transmitter function in this model is designed to give Dual 10dbm optical output where network have only lower opticalthere. The optivision transmitteris constructed with SMD technology to give high quality enable it to meet or exceed its performance. Its is operated with 12VDCpower supply and have very low power consumption.

RF Input AGC for stable RF Output level Otical + RF Input 12V DC External Power Supply RF Input 72 87 dB Optical Input +3 -8 dBm Optic Output Power: 10x2 dBm / 10x4 dBm Optic Out Indicators for each Optic Out Very small in Size Very Low Power Consumption

Transmitter has 4 Optical Output of 10dBm each, Operated on 12V DC Adaptor, Can be Operate with RF Coaxial Input or Optical Input, Incorporate on board AGC gives stable RF yield while worked on both info whether RF Input or Optical Input, Each 10dBm Optical Transmitter has LED Indication which show Each Transmitter Status whether Optical Output is alright or Low/No Optical Output

RF Input AGC for stable RF Output level Otical + RF Input 12V DC External Power Supply RF Input 72 87 dB Optical Input +3 -8 dBm Optic Output Power: 10x2 dBm / 10x4 dBm Optic Out Indicators for each Optic Out Very small in Size Very Low Power Consumption

Eco & High Quality are avaialable High performance ORTEL 1550nm laser ensures the stability of working. Auto temperature control circuit ensures high quality transmission of CATV signals. Front panel VFD/LCD display for operating parameters.45870 MHZ Operational Bandwidth.

Optical Transmitter is mainly used in 1550nm optical fiber transmission systems. It uses a DFB laser with an optical output power of 6 and 10dBm, and advanced intelligent electronic predistortion compensation technology. It is one of the most important components to build a CATV-HFC network. It is mainly used to transmit analog video, digital television signal, telephone voice signal and data (or compressed data) signal. This Multicom product provides a high quality low cost transmitter solution for a 1550nm optical fiber CATV system.

Optical Transmitter is mainly used in 1550nm optical fiber transmission systems. It uses a DFB laser with an optical output power of 6 and 10dBm, and advanced intelligent electronic predistortion compensation technology. It is one of the most important components to build a CATV-HFC network. It is mainly used to transmit analog video, digital television signal, telephone voice signal and data (or compressed data) signal. This Multicom product provides a high quality low cost transmitter solution for a 1550nm optical fiber CATV system.

This Transmitter is small in size and designed economically for small and big networks. The transmission of optic signal at 1310nm and (optional)1550nm for carry multi analog and digital channels CATV transmission. This optivision transmitter have MGC (manual gain control)for easy to handle RF input signal. The optivision transmitteris constructed with SMD technology to give high quality enable it to meet or exceed its performance. Its is operated with 12VDCpower supply and have very low power consumption.

OPTILINK FTTH NODE 1 WAY INDOOR converts the optical signal received from the headend into a +28 dBmV RF output with a -1 dBm optical input. The compact housing includes an optical receiver and wide bandwidth RF amplifier having a frequency range of 50-1218 MHz.

optilink ffth node 2 way indoor designed for catv ftth applications, this mini optical receiver offers flexibility in operation and maintenance. Its gaas fet technology provides low distortion and a flexible input level along with low power consumption and surge design in a bi-directional application.

optilink ftth node 3 way indoor is passive 3 way ftth optical converter for digital tv, input optical power:0-15dbm, optical return loss:>45db, optical receiver wavelength:11001600 nm, optical fiber type:single mode, frequency range:40-1000mhz, sc/apc to f-female connector. No power required optical connector: sc/apc good linearity and flatness smaller size and easier install

optilink ftth node 4 way indoor is a 4 way optical receiver having sc/apc optical connector with oem/odm support. Features: * designed for ftth(fiber to the home) networks * without the power supply can work normally * zinc die-cast housing, nickel-plated

OPTILINK FTTH NODE 5 WAY INDOOR designed for FTTH(Fiber To The Home) Networks. Excellent linearity and flatness. Wide range of optical input power. Using GaAs amplifier active devices.

OPTILINK FTTH NODE 6 WAY INDOOR has Passive 6 Way FTTH Optical Converter for Digital TV, No Power Required, Optical Connector: SC/APC, Lensed protection and high responsivity PD for more performance, Small and Cute Design for Easy Handling With RF Shielding Protection

OPTILINK FFTH NODE 2 WAY OUTDOOR 64 DB is designed by CATV FTTH Network application, The bandwidth is up to 1G and provide high output level up to 110dBm, High AGC Range -7 to 1 with very low power consumption, While with SNMP Network management to improve overall network performance and reliability

OPTILINK FTTH NODE 3 WAY OUTDOOR 62 DB is CATV optical receiver and this optical node adopts MMIC as the pre-stage amplifier and backward stage used GaAs power double hybrid module. Adjustable attenuation and equilibrium makes debugging extremely convenient.

OPTILINK FTTH NODE 4 WAY OUTDOOR 58 DB is an outdoor 4 outputs waterproofing receiver. It is mainly used in the building, community or village with concentrated users and high level multi-outputs distribution network. Also suitable to used in the place where it is not convenient to take the electricity and single equipment drives many users.

OPTILINK FTTH NODE 5 WAY OUTDOOR 55 DB having high quality aluminium housing, GaAs circuit allows low power optical input, adjustable attenuator and equilizer, separate AC ports and gives 5 way output

OPTILINK FTTH NODE 6 WAY OUTDOOR 52 DB is mainly used in the end of optical fiber network, where needs multi-ways high RF output level distribute to subscribe directly, and request bi-directional function. In this way it could reduce the amplifier and make the network more reliable. The rack adopts the newest waterproof aluminum rack with the most popular aluminum passivation technology.

O-VISION GOLD FTTH NODE 1 WAY INDIAN 66 DB is 1 way output AGC Mini CATV FTTH WDM Optical Receiver Node is a home-based optical receiver, cater to the ultimate goal of development of optical access for FTTH network. The equipment uses low-power optical detector, GaAs and optical control AGC technology to meet the needs of FTTH CATV reception

O-VISION GOLD FFTH NODE 2 WAY INDIAN 62 DB is a 2-way output FTTH CATV optical receiver. Compact and reasonable structure, ABS cover. Microprocessor control, digital display the parameters, the engineering debug is especially easy.

O-VISION GOLD NODE 3 WAY INDIAN 58 DB is a 3Way Output Optical Receiver with 3Way Output Optical Receiver. Ultra low optical power output; Operating RF 40-1000MHz

FTTH NODE 1 WAY (CHINESE) 66DB is a 1-way output FTTH CATV optical receiver.The structure compactness of the circuit is rational within this product, the outer cover selects the special-purpose aluminum alloy type material for use.the surface isoxidized and deals with by wire drawing

O-VISION GOLD NODE 4 WAY (INDIAN) 56 DB designed CATV optical receiver and this optical node adopts MMIC as the pre-stage amplifier and backward stage used GaAs power double hybrid module. Adjustable attenuation and equilibrium makes debugging extremely convenient. High responsivity PIN photoelectric switch tube. high gain and low distortion.

O-VISION GOLD NODE 6 WAY (INDIAN) 50 DB is Passive 6 Way FTTH Optical Converter for Digital TV, Optical Receiver Wavelength:11001600 nm, Optical Fiber Type:Single Mode, Frequency Range:40-1000MHZ, SC/APC to F Male connector.Aluminum Profiles housing, excellent heat dissipation performance

O-VISION GOLD M-CONVERTOR 10/100 DU-F is a Gigabit Dual Fiber Media Converter. Aviabilty of both single and multimode fiber optic transmission.; suitable for concentration management 2U Racks. Broadcasting filtration function, automatic recognizing and modifying address with Store-and-transmission operational mechanism. Full duplex flow control or half duplex backpressure flow control, with auto negotiation function.Life-long maintenance. External power supply. Application Situation 1.Bad industrial environment or high requirements for Lightning protection 2. Intelligent transportation supervisory system(ITS) 3. High-speed Way supervisory/Tele-Communication System 4. Large corporations, network security monitoring system, multi-function system 5. Long-distance Muti-media Schooling, Campus monitoring, long-distance broadcast television transmission system

4- way LNB is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the radio waves from all sides of the dish and converts them to a signal which is sent through a cable to the receiver inside the building to get the best quality signal strength. brand new superb quality superb reception

17 Degree LNB will really clean up those sparkles in your picture. Upgrade that old tired lnb for the best picture on 4DTV or analog systems. Mini design allows for fitting into tight places and the short wave-guide eliminates unwanted signal losses. Includes gasket, coax seal and flange bolts/nuts.

Norsat PLL Low Noise Blocks (LNBs) deliver reliable signal reception for satellite communications applications around the world with industry leading LO (Local Oscillator) stability and high gain for C-Band NORSAT 3120 C-BAND PLL LNB Norsat 3120 High Stability PLL LNB. 3.40 to 4.20 GHz. LO Stability 1.0 ppm +-5 kHz. Noise Temperature:20 K. Type F connector The 3000 Series is Norsat's premium quality C-Band LNB. The preferred LNB for all C-Band applications.

RAGIS OPTICAL FIBER IDENTIFIER is an important tool for optical maintenance, which is used for non destructive fiber identification work, can be detect in any location of both SM and MM fiber. It also has Visual Fault Locator module with fault location function. It is the ideal instrument for online test Function: 1.Indicate the signal directions and power in fiber; 2.Indicate the signal presence or absence(Live or dark fiber); 3.Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz, 2KHz) with audible warning; 4.Displays the relative core power ; 5.Easy-to-replace adaptors; 6.Lower power indication; 7.Build in VFL function.

OPTILINK SFP 1.25 GIGA 40KM SINGLE FIBER 1 (PAIR) (TX

1310/RX1490) has Single Fiber Transceiver with single mode SC connector, It used in Gigabit Ethernet Passive Optical Network (GPON) ONU

OPTILINK SFP 1.25 GIGA DUAL FIBER 20KM (1310NM) are high performance, cost effective modules supporting data-rate of 1.25Gbps and 20KM transmission distance.It has three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit Applications Gigabit Ethernet Fiber Channel Switch to Switch interface Switched backplane applications Router/Server interface Other optical transmission systems

A power supply is used to transform various types of power into a compatible format to be stored, like solar energy to electrical energy Usage/Application Industrial Automation Output Voltage 24 Vdc Input Voltage 100-220 V Design Smps

SMPS is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently.12V DC supply can be easily derived from the household AC supply with transformation, rectification, filtering and stabilisation. These power supplies have a bulky steel- or iron-laminated transformer that provides a safety barrier for the low-voltage output from the AC input, and reduces the input from typically 230V AC to a much lower voltage.

OPTILINK 12 PORT ODF LOADED SC panel is designed for fiber connection and distribution of backbone fiber cable; it is suitable for fiber splicing, storage and protection. Features The shell is high intensified & insulated material, thus having excellent mechanic performance Fiber input: 4 Adapters output: 12core or 24 core or 48 core Suitable for different adapter (SC simplex, SC duplex, LC duplex, ST simplex, FC simplex) The slide out style can be with changeable adapter plate, 4ports and 8 ports are available.

O-VISION GOLD STB BUSTER buster detects and defeats voltage drop and current activated devices without user intervention. defeats all common types of wire taps analog lines only telephone tap recorder shook switch bypass hot microphone series transmitters. Inline telephone bug tap detector that consistently analyzes and displays line voltage on it's built in LCD display when connected to an analog telephone line.

SIGNAL POWER INSERTER is a CATV Outdoor Power inserter , 5-1000Mhz, Power pass 10A. 51000MHz Bandwidth, Low insertion losss, High return loss and isolation, Excellent waterproof craft, Provide high performance, Good Shield, CE&ROHS Certified.

splice inside, book-form structure for distribution function. Design suitable for indoor or outdoor, number of 2 inlet 8 outlet (total:10 piees), max.capacity:8 core, (with 8pcs sc/apc adapter ), (with 1x8 0.9mm mini type plc sc/apc connector), box color: black or white is optional, way to installation: with telegraph pole mounting accessories. Features: industry standard user interface, be made of high impact plastic. Anti-uv, ultra violet resistant and rainfall resistant. Wall and pole mountable. Light, easily open and maintenance. Splice inside, book-form structure for distribution function.

mainly referring to plc splitter termination box, it is often deployed in ftth applications for connecting feeder and distribution cables through optical splitters. And it can distribute cables after installing splitters and also can draw out room fiber optic cables in direct or cross-connections. Suitable for fiber terminal point to complete connection, distribution and scheduling between perimeter fiber cables and terminal equipment, especially suitable for mini-network terminal distribution. Therefore, it is widely applied in ftth indoor and outdoor terminal applications.

OPTILINK FTTH BOX 24 WAY /O V E-SYSTEMIZER is a fiber optical distribution box that provides a cost-effective secure solution for the feeder cable to connect with drop cable in FTTx communication network system. It is designed to accommodate one inlet cable up to 14mm in diamter and 24 drop cables as access cable.

ftth fiber optical terminal box, outdoor fiber optic termination box is used in wiring connection between optical cable and optical communication equipment, through adapter in distribution box, optical fiber jumper leads optical signal, realize optical wiring function, and can meet the optical splitter placed to achieve spectral function. Features abs material used ensures the body strong and light. Waterproof design for outdoor use. Drop resistance, ability to work under vertical pressure of 500n. Easy installations: ready for wall mount installation kits provided. Adapter slots used, no screws and tools needed for installing adapters. Ready for splitters: designed space for adding splitters. Application optical lan & wan & catv ftth project & fttx deployments broadband high-bit rate data transmission active device terminations testing instruments optical fiber communication networks pon networks optical signal distribution

O-VISION GOLD FTTH SLEEVE (SELF SUPPORT) unit is positioned in the center. Two parallel fiber reinforced plastics (FRP) are built at the two sides. Then the cable is completed with a black or other color LZSH sheath. Bend insensitive fiber provides high bandwidth and good communication transmission property; 2 parallel FRP strengthen members protecting the fibers ensure good performance on cable bending; Simple structure, light weight and high practicability; New flute design, easily strip and splice, simplify the installation and maintenance procedure; Environment friendly Low smoke, zero halogen and flame-retardant sheath.

O-VISION GOLD FTTH SLEEVE (DUAL SUPPORT) structure is the 250UM fiber is inserted into the loose sleeve made of high modulus material. The waterproof compound in the loose casing. The loose casing is covered with a double coated steel strip (PSP), and the steel belt and the loose casing are added with water-resistant material to ensure the compact and longitudinal water resistance of the cable. Two parallel wires are placed on both sides to squeeze the polyethylene sheath into the cable Features Good mechanical and temperature performance. High strength loose tube that is hydrolysis resistant Crush resistance and flexibility. PSP enhancing moisture-proof Two parallel steel wires ensure tensile strength Small diameter, lightweight, and friendly installation

O-VISION GOLD FTTH SLEEVE JOINTER WHITE is used in FTTH Connection. We use this Fiber Drop Repair Splice Closure to make heat Shrinkable Splice with 2pcs Drop Cable (Or Drop Cable SC Connector Terminated one side). Designed for either Flat Drop Cable or Round Drop Cable. this Fiber Drop Repair Splice Closure is installed indoor or Outdoor, provide good connection and protection in FTTH Constructions.

O-VISION FIBER SUPPORT CLIP is an offset clip for use with light fiber has a base including a hole for accommodating a fastener. The clip also includes an insert with a light fiber retaining member. The light fiber retaining member may take any of several forms and may be either rigid or flexible. The insert and the base are held rotatably together by a locking mechanism. The insert and the base are arranged such that when the insert is inserted into the base, the insert hides the fastener from view.

O-VISION GOLD OFC SLEEVE 60MM (DELUX) having two parallel wires are placed on both sides to squeeze the polyethylene sheath into the cable.The loose casing is covered with a double coated steel strip (PSP), and the steel belt and the loose casing are added with water-resistant material to ensure the compact and longitudinal water resistance of the cable.

O-VISION GOLD OFC SLEEVE 45MM is Moisture resistant for environmental protection. Clear sleeve make it easy to detect splice before shrinkage.Easily use and avoid any damages to the optical fiber during installation.Color optical fiber splice protector is very convenience for installation

Ribbon series fusion splice protection sleeve is designed to accommodate 2 - 12 ribbon fiber. Stock lengths are 40mm, but are also available in a new 30mm length for smaller packaging requirements. This product is constructed with an inner EVA meltable adhesive tube, a polyolefin heat shrink outer tube and either single or dual strength members. Our single strength member sleeve which has become an industry standard, has an after shrink diameter of 4.9 X 4.4mm, and utilizes a special glass member. Our dual strength member sleeve is designed to "sandwich" the ribbon, thus eliminating any undue stress on the fiber, and has an after shrink diameter of 5.7 X 4.9mm. This option is available in a variety of glass and special high temperature plastic member combinations. The tubes are clear to allow viewing of the fiber during and after splicing. The entire assembly is designed to ensure that all members maintain perfect alignment during shipping, handling and shrinking.

Eight 10/100Mbps auto-negotiation RJ45 ports with auto MDI/MDIX supported. Easily wired network expansion. Compact design for flexible arrangement. Plug and play setup, no configuration required. About the same size as a smartphone, the MS108 can be placed anywhere in your home without taking up too much space. Its fanless design allows it to remain unobtrusive, regardless of how long it has been running. Features: Eight 10/100Mbps auto-negotiation RJ45 ports with auto MDI/MDIX supported Easily wired network expansion Compact design for flexible arrangement Plug and play setup, no configuration required About the same size as a smartphone, the MS108 can be placed anywhere in your home without taking up too much space Its fanless design allows it to remain unobtrusive, regardless of how long it has been running With eight 10/100Mbps Ethernet ports, you can quickly expand your wired network The MS108 is flexible and is fully compatible with computers, printers, IP cameras, smart TVs, game consoles, and more This makes it perfect for home, small office, and even dormitory environments

DBC 8X1 OUT DISH SWITCH is High quality alloy material with nickel-plated, excellent chip and professional program, compatible with more types of satellite receiver. Allows the user to connect up to 8 satellite sources (LNBF) and combine the signal into a single coaxial cable and connect them to a single satellite receiver.Can work normally outdoors under unsheltered circumstance, designed for indoor or outdoor use

OPTILINK MANAGABLE SWITCH 24 FIBER PORT MEN99524B Equipped with 24 Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras

The OP-MEN 99810 is a GbE managed switch, it supports 8-Port GbE copper with RJ45 and 2-Port GbE fiber with SFP, and supports redundant power circuitry. The main power inlet is 100240VAC, the alternate power is a 12VDC battery; the battery is connected on DC terminal block connector. When AC input power is good, the OP-MEN 99810 provides 15VDC output to charge the connected on DC

Logical design, waterproof structure, easy installation, convenient maintenance Fibre Optic Cable Joint Enclosure for up to 48 fibers. Selectable capacities as ordering options are 12 24 cores Used worldwide in cable desiging of FTTH/FTTB networks, AD-net cable splicing solutions proven to be one of most effective and good quality in market.

O-VISION GOLD 4 GLAND CYLENDER (BOMBOO SMALL) having Features of Optical Fiber Cable Joint Closure Useful for CATV Applications The product is compact and composite in design Suitable for Splicing upto 48 F Resistant to chemicals and corrosive atmosphere Easy re-entry and closing Perfectly water and air proof

O-VISION GOLD 4 GLAND CYLENDER (BOMBOO BIG) is Resistant to chemicals and corrosive atmosphere used in Optical Fiber Cable Joint Closure, Water Resistance. Features Useful for CATV Applications The product is compact and composite in design Suitable for Splicing upto 48 F Resistant to chemicals and corrosive atmosphere Easy re-entry and closing Perfectly water and air proof

O-VISION 4 GLAND SMALL CYLENDER BOMBOO (48F) is Resistant to chemicals and corrosive atmosphere used in Optical Fiber Cable Joint Closure, Water Resistance. Features Useful for CATV Applications The product is compact and composite in design Suitable for Splicing upto 48 F Resistant to chemicals and corrosive atmosphere Easy re-entry and closing Perfectly water and air proof

antenna 3 dbi internal

wireless speed 300 mbps

device management web configuration, easy to setup with wps button

frequency band 2.412g2.484ghz ghz

wireless distribution system access point, repeater