Other Products / Services #476101

We supply all type of rotary actuator valves electric actuated ball valve, electric actuated valve, electric actuator butterfly valve, electric actuator motor valves, electric actuator valves, electric ball valve, electric butterfly valve, electric control valve, electric flow control valve, electric gate valve, electric magnetic valves, electric modulating valve, electric operated butterfly valve, electric operated valves, electric solenoid valves, electric thermal valves, electric valve, electric water valve, electrical actuated gate valve, electrical change over valve, electrically actuated valves, electrically operated ball valve, electrically operated butterfly valves, electrically operated sluice valve, electro pneumatic ball valves, electro proportional valves, electro valves, motorised butterfly valve , motorised control valves, motorised damper valve, motorised valves, motorized actuated ball valve, motorized air butterfly valves, motorized ball valve, motorized butterfly valve, motorized control valves, motorized damper valves, motorized gate valve, motorized knife gate valves, motorized sluice valve, motorized valve mounted ball valve.

Being a prominent name in this area of operations, we, as a Supplier, bring forth qualitative array of Electric Actuator Operated Guillotine Damper. We are backed by a well-structured and capacious storage unit wherein we store the entire lot in a secured manner. Moreover, we ensure complete security of the stored items.

 

Electrical Actuator Details:

• Manufactuator  - Cair Euromatic Automation Pvt.ltd.
• Brand / Model - Cair / Atm-in
• Characteristic - On-off Type With Integral Starter Unit Controller 
• Power Supply - 415v Ac, 50 Hz
• Housing & Cover - Cast Iron
• Enclosure - Water Tight Ip 67
• Ambient Temperature - -10°c 50°c
• Torque Switches - 2 X Spdt
• Limit Switches - 2 X Spdt
• Stall Protection - Current Trip Provided With Starter Unit
• Indicator - Continuous Position Indicator
• Manual Override - Provided

Integral Starter Unit Details:

• Selector Switch - Open / Stop / Close.
• Selector Switch - Auto / Manual Or Local/remote.
• Indicating Lamps - Open / Close / Error.
• Enclosure - Ip 67 Weather Proof & Dust Proof.
• Blinking Led Lamp Indication During Open/close Operation.
• Red - Fully Open Green - Fully Closed.
• Automatic Phase Rotation Correction And Phase Loss Protection.
• 24v Dc Voltage Level Is Applied For Remote Control.
• Easy And Flexible User Connection Way.
• Non-penetrate Local Control Switch With Hall Effect Device To Improve Water Proof Feature.
• Five Passive Contacts To Indicate The Working Status Of The Electric Actuator And Facilitating The Monitoring Of The Electric Actuator By Dcs System.
• Operating Mode Select Switch Can Be Locked With Ordinary Lock To Prevent Improper Operation.

Size

• MOC - Upto 3000MM x 3000MM IS Grade MS / S.Steel
• Pressure - Upto 10000MMWC / PN 6 / PN 10 (Depending on REQ.)
• Temp. = -20° to 500°C
• Ends - Flanged / Wafer

we offer Multi Port Ball Valves Actuators.Mult Port Ball Valves For water treat ment application."Cair" offers Single Phase 220V AC Motorized Electrical Actuator Operated Three / Four Way design investment Casting Ball Valve.Electrical Actuator Details:Manufacturer: Cair Euromatic AutomationBrand: CairModel: MODCharacteristic: On - Off TypeTravel: 90 DegreeIndicator: Continuous Position IndicatorPhase: Single PhasePower Supply: 230V AC (10%)Body Material: Aluminium AlloyAmbient Temperature: 20C 80CMotor Insulation: Class FProtection Class: Weather Proof IP 67Limit Switch: 1NO + 1NC Output of 220V ACPosition on Power Fail: Stay PutManual Override: ProvidedAccessories: Modulating ControllerInput Signal 4 20 mAIntegral Starter UnitControl Panel Size Range: 1/2" To 8"Ball Valve Details:Body: WCB / SS 304 / SS 316 / SS 304L / SS 316LBall: SS 304 / SS 316Stem: AISI 410 / AISI 304Seal: PTFEEnd Connection: Screwed End / Flanged End / Triclover End / Socket Weld EndFeatures: Body & End are Investment CastSelf adjusting stem packing4 piece ball seatsBlow - out proof stem designAnti Blow - out proof stem design

We offer flame proof electrical actuator cmri approved"cair" offers ce approved flame proof single three phase rotary electrical actuators the explosion-proof electric actuator is the latest development of a new generation of explosion-proof products by our company with a compact, good stability, functionality, safety and complete reliability. Most suitable for the environmental of potential fire explosion, such as the factories and warehouses which use or custody of flammable gases volatile chemicals and other materials with high ignition. electrical actuator details:manufacturer : cair euromatic automation pvt. Ltd. brand model : cair mod-flpapprovals : design (tuv) iso 9001:2008 ce ieccharacteristics : on-off typetravel angle : 90 + 5power supply : 220 v ac (+ 10%)insulation : class fhousing & cover : cast ironenclosure : cmri ii a ii b flame proof certifiedprotection class : ip 67 ex-proofambient temp : -30 c +70 climit switches : 2x spdttorque switches : 2x spdtstall protection : built in thermal protectionindicator : continuous position indicatormanual override : hand wheel auto declutching mechanismself locking : provide by means of worm gearingend stopper : external adjustable screwsconduit entries : two g34external coating : dry powder coated accessories:modulating regulating typesignal input: 4 20 ma potentiometer feedbackintegral starter unit control panelspring return type with battery back-up systemflame proof electrical actuator for rotary valvetype :- motorized valves, motorized ball valve, actuator ball valves, ball valve actuator and actuated ball valve. type :- motorized valves, motorized ball valve, actuator ball valves, ball valve actuator and actuated ball valve. type of flame proof electric actuators :-flameproof actuatorflameproof actuatorsflameproof linear actuatorsexplosionproof electric actuatorsexplosion proof electrical actuatorsflameproof compact actuatorflameproof compact actuators.

With our cutting edge technology, we bring forth to the clients Micro Limit Switch Box. Micro Limit Switch Box is Weather Proof & Flame Proof. Micro Limit Switch Box that we manufacture is high on demand in the national and international markets. Robust design, weather resistant and trouble free functioning are synonyms to the range of Micro Limit Switch Box (Weather Proof & Flame Proof) offered by us in the markets. Detail:

• Body : Aluminium die cast, powder coated
• Dome : poly carbonate.
• Yellow/Black ON/OFF Indicator
• Limit switch : 1 NO + 1 NC TYPE ( 2 NO + 2 NC as per clients requirements)
• Provided with cable connector with numbering indication
• Dual Cable Entry :  NPT for easy wiring
• Enclosures : Dust Proof, Weather Proof & Flame Proof IP 67 & IP 68
• Omron / Honeywell Micro Switch / NJ2V3N Proximity Sensor / Cylindrical Proximity Sensor

Uses :

• Pneumatic Actuators
• Quarter Turn Valves

description:

the cair 500 ip series transducers are ideally used to convert current or voltage input signal to a linearly proportional pneumatic output pressure. This versatile instrument is rugged and reliable force balance transducers for use in both process control and industrial applications, for standard process control applications which typically utilize 3 to 15 psig output and industrial & high pressure application which typically utilize pressure output up to 120 psig. Aira 500 ip series transducers combines low cost, high accuracy and minimum air consumption with field proven technology. Versatile design features and rugged, compact housing with a choice of cmri and atex* approved versions for explosion proof or intrinsically safe operation when used with a suitable barrier.

principle of operation:

the cair 500 ip series transducer is a balance device in which, when electrical current is passed through the coil of transducer, a magnetic field is created which acts on the magnet assembly, casuing the anvil & diaphragm to move away from or forward the nozzle (flapper nozzle) depending on the direction of current flow. Motion at the nozzle assembly is proportional to the amount of current passing through the coil.

the flapper/anvi move away from or forward towards the nozzle creates back pressure which acts as pilot pressure to an integral booster relay. When in put electrical current increases (or decreases for reverse acting) causes proportional output pressure increases. Zero and span are calibrated by turning easily accessible adjusting screw on the front face of the unit. The zero adjusting screw causes the nozz e to move relative to the flapper / anvil. The span adjusting screw is a potentiometer that limits the current through the coil. A thermistor circuit in series with the coil provides temperature compensation.

split ranging:

if split ranging id required the 4-20 ma input and 3-15 psig output version (cair ip-501) can be recalibrated to provide 3-9 psig or 9-15 psig output.

mounting:

the cair 500ip series transducers can be pipe, panel or bracket mounted in any position. Position other than vertical will require recalibration of the zero and span adjustment. Transducers should be mounted in a vibration-free area. field reversible: all cair 500ip series transducers are calibrated at the factory for direct acting operation but may be used in reverse acting mode by reversing the polarity of signal leads and recalibrating. When calibrated for reverse acting applications it provide a minimum of their full rated output pressure (i.e. 3 psig) upon inputsignal failure.

integrated characteristics:

-> compact design.

-> low air consumption.

-> integral volume booster flow capacity up to 20 scfm is boosted by the built in volume booster.

-> field reversible output provides inversely proportional to input signal.

-> flexible adjustments of zero & span.

-> standard process inputs.

-> split ranging.

-> nema4x (ip65) enclosure optional.

-> saving in investments.

-> cmri and atex approval pending.

applications:

-> the cair 500 ip series transducers converts electrical signal to a pneumatic output which can be used to operate the followings:

-> valve, valve-actuators

-> damper and louver actuators

-> valve positioners

-> air-cylinders

-> relays

-> clutches

-> web tensioners and brakes

used in:

-> petrochemical processing systems

-> energy management

-> hvac systems

-> textile processing systems

-> pharmaceutical processing system

-> pulp and handling controls

Designed with precision, Electro Pneumatic Valve Positioner we offer is high on demand in the national and international markets. Electro Pneumatic Valve Positioner provided by us is widely appreciated by the clients for low power and air consumption, short response time, high sensitivity, compact design and reliable performance. Moreover, we offer this Electro Pneumatic Valve Positioner with position transmitter. Clients can avail the same at market leading rates. About Electro Pneumatic Valve Positioner :

• APP8000 Serial smart valve positioner is developed for smooth operation of linear or rotary pneumatic valve actuator.
• The positioner controls the valve to the necessary position when collecting standard electrical current signal or computer signal.
• This smart valve positioner comprises of inductive position sensor, control CPU, piezo & pilot valve etc. besides others.
• Through the use of pilot valve and advanced piezo valve of HOERBIGER-ORIGA company, the response time of piezo valve is below 2ms whereas the response time of pilot valve is under 20ms, thus leading to a very high adjusting precise and short response time of the valve.
• When the valve reaches the required position, the air position could be overlooked as the position does not require air
• The smart valve positioner is combined with the utility of performance monitor along with digit valve controller.

Principle :

• Uses nozzle flapper structure
• Advanced PID fuzzy control software in the CPU, auto adapting parameter of PID, it makes the control fast, steady and exact
• 32 letter LCD version and four push buttons meets the precise requirements of parameters input, zero and span adjusting or split range
• Valve position adjusting could be done without then use of any other instruments at the working place

Features :

• Takes 4-20mA input signal as its power
• Uses two wire lines
• 4-20mA feedback module and limit switch module is optional
• Signal drop voltage: 9.2 equal to load resistance 46017
• 4-12mA and 12-20mA split range
• Freely set alarm value and output status of limit switch
• 32 letters LCD, clear showing
• Pressure sensor with optional measuring diaphragm can run self-diagnoses
• Self-diagnoses consists : pressure air stopped, valve locked, positioner failure, valve posited time, diaphragm or cylinder air leaking, packing abrasion and ventileinheit abrasion etc.
• Adjustable sensitivity
• Available to choose the output characteristics, such as linear, equal percentage, quick open and user defined

 

The guillotine damper, or slide gate damper as it is sometimes called, has the main function of isolation of equipment to permit inspection, maintenance, or repair in addition to process isolation. Occasionally, guillotine dampers are specified for bypass ducts, if operation requirements allow enough time for the slow-moving blade to travel across the opening.The basic mechanical elements of the guillotine damper are a blade, a peripheral-seal system to prevent gas leakage at all stages of blade movement, support members for the blade , and a drive to move the blade steadily and continuously from open to closed and back again.In addition, the guillotine damper generally requires more care in design and construction of the seals. Perhaps this is because gas-tightness requirements are higher for guillotines than for louvers, but the fact remains that, in many guillotine dampers, the blade drags past most of the seal perimeter for the full stroke, making heavier demands on the seal material.The simplest form of guillotine damper is the single-thickness flat plate blade. The one-piece blade provides verifiable closure of the duct with minimal leakage at the blade edges. Seals are provided to control leakage where the blade enters the duct section. These seals can be air sealed to contain gases in a positive pressure duct. Leak paths are typically less than 0.1% of duct area with resulting flow leakage of 0.4 to 1.1%. The blade guides insure smooth operation and are self cleaning in deposit producing environments.

We are manufacturer of Valve ball

We are manufacturer of valve Automation

We are manufacturer of Industrial Automation