Crane #3700764

Circular Structure Cranes with hoist moving on the Circular Path, IS 3938, 807

A Crane comprising of bridge supported by a legs and capable of travelling on tracks at ground level.

Further more the crane designs vary from Castellated Structure to Normal Structure as per Clienetele Requirements.

Designed as per IS 3177, 807.Mostly outdoor duty .

The Crane comprising of a bridge, supported by end carriages capable of travelling along gantry rails fixed on gantry girders AND INSTAED OF HOOK Grab bucket is attached depending upon the requirements of lifting materials. Designed as per IS 3177, 807. Depending upon the number of girders the over head travelling cranes can be termed as"Double Girder Crane", "Single Girder Crane"

An overhead Traveling Crane supported for its long travel motion, from the bottom flanges of the LT RUNWAY BEAM on which it travels.Designed and manufactured as per IS 3177, 4137, 807.

Single girder Under Slung Cranes are Designed for the Capacity till 20Tonnes with span max upto 30MTRS .(Lift as per Clients Requirements)

Very useful in areas where in very less space is available low room space.

These cranes can beGrab/Double Girders/Single Girders, wherever the constraints of civil designing comes for the space available between crane Gantry/ roof is less there we suggest the Low head room options.Designed as per IS 3177, 807.

The Crane comprising of a bridge, supported by end carriages capable of traveling along gantry rails fixed on gantry girders. Depending upon the number of girders the over head traveling cranes can be termed as "Double Girder EOT Crane", "Single Girder EOT Crane", designed as per IS3177, 4137, 807.Double Girder EOT Cranes are designed till 0.5 to 200 tonns with span 6mts to 50mtrs & above, lift 6mtrs to 120mtrs .(as per clients requirements) further more the crane designs vary from castellated structure to normal structure as per clientele requirements.

An overhead Traveling Crane supported for its long travel motion, from the bottom flanges of the LT RUNWAY BEAM on which it travels.Designed and manufactured as per IS 3177, 4137, 807.Single girder Under Slung Cranes are Designed for the Capacity till 20Tonnes with span max upto 30MTRS .(Lift as per Clients Requirements) Very useful in areas where in very less space is available low room space.

A Crane comprising of cross traveling, hoisting and swiveling of arm on which hoisting arrangement has been done. The arm of Jib Crane is fixed on column / pillar as a cantilever. It can rotate about its axis through any required angle.Designed as per IS 3938, 807.

An overhead Traveling Crane supported for its long travel motion, from the bottom flanges of the LT RUNWAY BEAM on which it travels.Designed and manufactured as per IS 3177, 4137, 807. Single girder Under Slung Cranes are Designed for the Capacity till 20Tonnes with span max upto 30MTRS .(Lift as per Clients Requirements) Very useful in areas where in very less space is available low room space.

A Crane comprising of cross traveling, hoisting and swiveling of arm on which hoisting arrangement has been done. The arm of Jib Crane is fixed on column pillar as a cantilever. It can rotate about its axis through any required angle.Designed as per IS 3938, 807.

Single girder Under Slung Cranes are Designed for the Capacity till 20Tonnes with span max upto 30MTRS .(Lift as per Clients Requirements)Very useful in areas where in very less space is available low room space.

Double Girder EOT Cranes are designed till 0.5 to 200 tonns with span 6mts to 50mtrs & above, lift 6mtrs to 120mtrs .(as per clients requirements) further more the crane designs vary from castellated structure to normal structure as per clientele requirements

A Crane comprising of a bridge supported on one end by a leg and at the other end by carriages (s) capable to travelling along tracks, one at ground level and elevated level. designed as per IS3177, 807

Double Girder Cranesare designed till 0.5t to 200tonnes with span 6mts to 50mtrs & above, lift 6mtrs to 120mtrs .(as per clients requirements).

Single Girders Cranesare designed till 0.5t to 20t with span 6 mtrs to 30mtrs .(lift as per clients requirements).

Further more the crane designs vary from castellated structure to normal traumatize as per clientele requirements.

These cranes can be Grab/Double Girders/Single Girders where in the the structure is in castellated form. Widely used in factories and various other industrial applications.Designed as per IS 3177, 807, (Russian design)

The Crane comprising of a bridge, supported by end carriages capable of traveling along gantry rails fixed on gantry girders. Depending upon the number of girders the over head traveling cranes can be termed as"Double Girder EOT Crane", "Single Girder EOT Crane", designed as per IS3177, 4137, 807.

Double Girder EOT Cranesare designed till 0.5 to 200 tonns with span 6mts to 50mtrs & above, lift 6mtrs to 120mtrs .(as per clients requirements) further more the crane designs vary from castellated structure to normal structure as per clientele requirements

Single Girder EOT Cranesare designed till 0.5 to 20 tonns with max. span of 30mtrs. (lift as per clients requirements)