As the name suggest, these filters are capable of bearing pressures up to the range of 210bar and more. These are mainly installed between the pump and the control valves in order to eliminate cavitation problems and protects the valves from pump failures. Failure of these pumps and valves sometimes runs into losses up to million of rupees. Thus in order to protect the machines and for its longevity appropriate filters are required. Characteristics:Superb adsorption of finest particles over a wide differential pressure range.High contamination retention capacity.High chemical resistance due to use of epoxy resin for impregnation and bonding.

As the name suggest, these filters are capable of bearing pressures up to the range of 210bar and more. These are mainly installed between the pump and the control valves in order to eliminate cavitation problems and protects the valves from pump failures. Failure of these pumps and valves sometimes runs into losses up to million of rupees. Thus in order to protect the machines and for its longevity appropriate filters are required. Characteristics: Superb adsorption of finest particles over a wide differential pressure range. High contamination retention capacity. High chemical resistance due to use of epoxy resin for impregnation and bonding. High burst pressure resistance during cold start. Absolute filtration down to 3 micron.

These filters unlike Inline Filters bear low pressure up to a range to 25-30bar. And thus are installed on the return line between the reservoir and the pump intake. Since these filters are in return line, these are fitted with a by-pass valve, thus when the filter get chocked, the relief valve opens up and the flow to the reservoir is uninterrupted.

Characteristics:

• Exemplary beta stability over a wide differential pressure range.
• High contamination retention capacity.
• High chemical resistance.
• High burst pressure resistance during cold start.
• Water and water traces in the fluid do not reduce filtration effect.
• Absolute micron rating down to 3 micron.

These come again within our range of a variety of filter elements. With the change of media to synthetic from organic fiber, we have achieved an increase in the working life of filter element and thus have imbibed more satisfaction in the minds of our valued customer.

Characteristics:

• Inorganic synthetic media with very high dirt holding capacity.
• Unique pasting technique in order to avoid any form or air or oil leakage from the engine.
• Low maintenance and high reliability.
• Specially dimple pleated corrugated media improves the working life and helps achieve complete usage of the filter media.

Be it Atlas Capco, ELGI, K.G.Khosla, Ingersol Rand, C.P.T, we have achieved the distinction of providing filters for screw compressor of these companies with a one to one replacement and with an equivalent quality material. Be it the pleating type or the wrapping type, we have mastered the art of manufacturing excellent quality filters in the field as well.

Characteristics:

• Very fine oil precipitators for Screw Compressors, retaining lubricating oil from the compressed air thus ensuring high performance and economical operation.
• Spiral wrap of the outer mesh provides uniform diffused flow throughout the length of the element for optimum filtration.
• Cadmium coated outer mesh for corrosion resistance.
• Excellent quality material and manufacturing techniques ensure longer life and high performance.

With the increase in our satisfied customer list, grows our range of products as well. And thus an increase in our scope and horizon which not only ends with Hydraulic Filter Elements. One of such section includes filters for E.D.M. and Wire Cut Machines. With acute competition and ever increasing demand of reducing filter cost, our elements have come out with flying colors both in terms of quality and price. Our valued customers are very much satisfied with our quality and services for the same. But this does not leave us with this much only, we keep on striving for better quality products and thus from time to time we keep on trying newer products and material to provide our clients with even better results.

Characteristics:

• Rugged, fully supported element construction with high collapse strength and filtration integrity.
• Filtration media has a unique structure with a fixed graded pore construction of inert, impregnated and bonded with specifically formulated resins for longer service life.
• Good precipitation and high dirt holding capacity.
• One to one replacement for all kinds of machines.
• Depending on requirement, special purpose filters can also be made

As the name suggest, these filters are capable of bearing pressures up to the range of 210bar and more. These are mainly installed between the pump and the control valves in order to eliminate cavitation problems and protects the valves from pump failures. Failure of these pumps and valves sometimes runs into losses up to million of rupees. Thus in order to protect the machines and for its longevity appropriate filters are required. Characteristics:Superb adsorption of finest particles over a wide differential pressure range.High contamination retention capacity.High chemical resistance due to use of epoxy resin for impregnation and bonding.

As the name suggest, these filters are capable of bearing pressures up to the range of 210bar and more. These are mainly installed between the pump and the control valves in order to eliminate cavitation problems and protects the valves from pump failures. Failure of these pumps and valves sometimes runs into losses up to million of rupees. Thus in order to protect the machines and for its longevity appropriate filters are required. Characteristics: Superb adsorption of finest particles over a wide differential pressure range. High contamination retention capacity. High chemical resistance due to use of epoxy resin for impregnation and bonding. High burst pressure resistance during cold start. Absolute filtration down to 3 micron.

These filters unlike Inline Filters bear low pressure up to a range to 25-30bar. And thus are installed on the return line between the reservoir and the pump intake. Since these filters are in return line, these are fitted with a by-pass valve, thus when the filter get chocked, the relief valve opens up and the flow to the reservoir is uninterrupted.

Characteristics:

• Exemplary beta stability over a wide differential pressure range.
• High contamination retention capacity.
• High chemical resistance.
• High burst pressure resistance during cold start.
• Water and water traces in the fluid do not reduce filtration effect.
• Absolute micron rating down to 3 micron.

These come again within our range of a variety of filter elements. With the change of media to synthetic from organic fiber, we have achieved an increase in the working life of filter element and thus have imbibed more satisfaction in the minds of our valued customer.

Characteristics:

• Inorganic synthetic media with very high dirt holding capacity.
• Unique pasting technique in order to avoid any form or air or oil leakage from the engine.
• Low maintenance and high reliability.
• Specially dimple pleated corrugated media improves the working life and helps achieve complete usage of the filter media.

Be it Atlas Capco, ELGI, K.G.Khosla, Ingersol Rand, C.P.T, we have achieved the distinction of providing filters for screw compressor of these companies with a one to one replacement and with an equivalent quality material. Be it the pleating type or the wrapping type, we have mastered the art of manufacturing excellent quality filters in the field as well.

Characteristics:

• Very fine oil precipitators for Screw Compressors, retaining lubricating oil from the compressed air thus ensuring high performance and economical operation.
• Spiral wrap of the outer mesh provides uniform diffused flow throughout the length of the element for optimum filtration.
• Cadmium coated outer mesh for corrosion resistance.
• Excellent quality material and manufacturing techniques ensure longer life and high performance.

With the increase in our satisfied customer list, grows our range of products as well. And thus an increase in our scope and horizon which not only ends with Hydraulic Filter Elements. One of such section includes filters for E.D.M. and Wire Cut Machines. With acute competition and ever increasing demand of reducing filter cost, our elements have come out with flying colors both in terms of quality and price. Our valued customers are very much satisfied with our quality and services for the same. But this does not leave us with this much only, we keep on striving for better quality products and thus from time to time we keep on trying newer products and material to provide our clients with even better results.

Characteristics:

• Rugged, fully supported element construction with high collapse strength and filtration integrity.
• Filtration media has a unique structure with a fixed graded pore construction of inert, impregnated and bonded with specifically formulated resins for longer service life.
• Good precipitation and high dirt holding capacity.
• One to one replacement for all kinds of machines.
• Depending on requirement, special purpose filters can also be made