Uses :Are the most versatile & widely used source of electric heating for industrial, commercial & scientific application. These are used in force air heating, thermal forming M/C, direct immersion in liquids, comfort radiant heaters, welded brazed or clamped to tanks & pipes hot runner molds, radiant & convection heater for ovens & dryers.
Construction :Tubular heaters are swaged construction provides maximum support to resistance wire.They can be designed in a wide range of electrical ratings, diameters, length, terminations & sheath material. Important & useful characteristic of tubular heaters are that they can be formed in to virtually any shape, brazed or welded to any metal surface and cast in to metals.Resistance wire is fusion welded to the steel terminal cold pins. These coils assembly is precisely stretched & centered in the element metal sheath which is than filled with grade 'A' magnesium oxide powder (Mgo). Swaged to reduced diameter into solid mass, permanently stabilizing the coil in center while providing excellent heat transfer & dielectric strength between the coil & the sheath.
Working Temperature :For temperature upto 200C can be used any of the heaters, in the range depending upon the space available. Air heater for higher temperature can be designed on request. Sheath material are as Inconal :- 800C; ss 304; 321; 316; upto 600C; copper:- 177C Mild Steel:- 350C
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

Uses :Strip heaters are designed for horizontal mounting position. As heating elements in various process machines, ovens, driers, textile machines, dies, rubber machineries for heating & drying of air, liquids, solids, powders & moisture protection in control H.V. cabinets, for efficient baking curring of paints enamels, lacquers, varnish, adhesives etc.
Construction :The sheathing is heat-treated mild steel or stainless steel or any other metal or alloy as per requirement. Insulating medium is either refractory or mica. The heater width is 1.1¹/₂" to 2" but recommended widths & length are available. Terminal connections are provided either at one or at each end.
Working Temperature :Applicable 250C.
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

Uses :Silica fused immersion heaters are specially designed for the quick heating of various acidic solutions used in electroplating & other industries. However these heaters are not recommended for Hydrochloric (HCL) or sulphuric (H2 So4) caustic (NaOH) & other alkaline solutions. The significant features of Titanium tube is that, that is unbreakable.
Note :These heaters are mounted vertically only & not horizontally & immersed upto the mark of effective length. If the liquid goes beneath the mark or line of effective length then heaters will get fused.

Uses :Plastic injection molding machines, plastic extruders, oil reclamation equipments, food & candy extruders, drum heating, extrusion dies, holding tanks, blow moulding M/C. barrel heads, food service warming, autoclaves & sterilizers, hot runner molds, pulp & paper processing equipment.For heating any cylindrical dies or surface pipe line in short for all round shape.
Construction :Ceramic band heaters are specially designed & engineered to meet the ever increasing demand for energy conservation & to improve operation efficiency. Are capable of generating the higher temperature to process today's high temperature resins.Electrical energy savings are achieved by 1/8" thick ceramic fiber insulating blanket, reducing power consumption.It is sheathed in stainless steel sheet. Ceramic band heaters transmit heat through both conduction & radiation. The element winding is designed to run at maximum temperature & heat the ceramic beads to the point.Heater's diameter & width vary according to requirement (As per custome design) Minimum 25mm dia to maximum in any size. Minimum 20 mm wide to maximum as many as provided.
Working Temperature :Applicable up to 600C
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

This multi size heating mantle has standard construction is used for same purpose. This multi purpose heating mantle construction provides a specially curved heating surface which ensures efficient heating of round & flat bottomed flasks of different sizes, provided with bottom outlet suitable for distillation, digestion, extraction etc. Multi size heating mantle has 2 or 3 heating circuits allowing the upper circuits to be switched of when smaller flasks are used or the level of the liquid in the vessel drops down. Also can be supplied with built in energy regulator for controlling the rate of heating.
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

Uses :As heating elaments for Dies Moulds, Paterns, Plastic Injection & Extrusion Barrels, Packaging, Soldering & Bending Irons Forming of metals & plastic sheets & various other applications demanding localised heating in works areas for heating, melting, forming or stamping metal or other material.
Construction :Generally, brass & S.S. is used as sheath but other high grade materials are also used for high temperature. Insulating medium is refrectory. Flexible wire or Screw type terminal connections are provided at one end and diameter & length of heater are as provided at one end & diameter & length of heater are as per specification given by customers. These cartridges are designed for horizontal mounting.
Working Temperature :App. 280C
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

Uses :Plastic extruders, plastic molding, hot runner molds, shoe machinery, hot stamping, food processing, medical equipment, heating gases & liquids, packaging equipment, glue guns, molds &dies.
Construction :High density wattage permit smaller heater to be used with good life expectancy. This results in up front as well as long term cost savings.Swaged construction (after heater is constructed than diameter reduces) provides maximum support for resistance wire, eliminating the effort of vibration & shock vertical mounting is also possible.Excellent heat transfer characteristics permit improved life expectancy over other style heaters.Higher density heaters are constructed in SS or inconal tubes.
Working Temperature:Application upto 800C.
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

Uses :Are the most versatile & widely used source of electric heating for industrial, commercial & scientific application. These are used in force air heating, thermal forming M/C, direct immersion in liquids, comfort radiant heaters, welded brazed or clamped to tanks & pipes hot runner molds, radiant & convection heater for ovens & dryers.
Construction :Tubular heaters are swaged construction provides maximum support to resistance wire.They can be designed in a wide range of electrical ratings, diameters, length, terminations & sheath material. Important & useful characteristic of tubular heaters are that they can be formed in to virtually any shape, brazed or welded to any metal surface and cast in to metals.Resistance wire is fusion welded to the steel terminal cold pins. These coils assembly is precisely stretched & centered in the element metal sheath which is than filled with grade 'A' magnesium oxide powder (Mgo). Swaged to reduced diameter into solid mass, permanently stabilizing the coil in center while providing excellent heat transfer & dielectric strength between the coil & the sheath.
Working Temperature :For temperature upto 200C can be used any of the heaters, in the range depending upon the space available. Air heater for higher temperature can be designed on request. Sheath material are as Inconal :- 800C; ss 304; 321; 316; upto 600C; copper:- 177C Mild Steel:- 350C
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

Uses :Strip heaters are designed for horizontal mounting position. As heating elements in various process machines, ovens, driers, textile machines, dies, rubber machineries for heating & drying of air, liquids, solids, powders & moisture protection in control H.V. cabinets, for efficient baking curring of paints enamels, lacquers, varnish, adhesives etc.
Construction :The sheathing is heat-treated mild steel or stainless steel or any other metal or alloy as per requirement. Insulating medium is either refractory or mica. The heater width is 1.1¹/₂" to 2" but recommended widths & length are available. Terminal connections are provided either at one or at each end.
Working Temperature :Applicable 250C.
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

Uses :Silica fused immersion heaters are specially designed for the quick heating of various acidic solutions used in electroplating & other industries. However these heaters are not recommended for Hydrochloric (HCL) or sulphuric (H2 So4) caustic (NaOH) & other alkaline solutions. The significant features of Titanium tube is that, that is unbreakable.
Note :These heaters are mounted vertically only & not horizontally & immersed upto the mark of effective length. If the liquid goes beneath the mark or line of effective length then heaters will get fused.

Uses :Plastic injection molding machines, plastic extruders, oil reclamation equipments, food & candy extruders, drum heating, extrusion dies, holding tanks, blow moulding M/C. barrel heads, food service warming, autoclaves & sterilizers, hot runner molds, pulp & paper processing equipment.For heating any cylindrical dies or surface pipe line in short for all round shape.
Construction :Ceramic band heaters are specially designed & engineered to meet the ever increasing demand for energy conservation & to improve operation efficiency. Are capable of generating the higher temperature to process today's high temperature resins.Electrical energy savings are achieved by 1/8" thick ceramic fiber insulating blanket, reducing power consumption.It is sheathed in stainless steel sheet. Ceramic band heaters transmit heat through both conduction & radiation. The element winding is designed to run at maximum temperature & heat the ceramic beads to the point.Heater's diameter & width vary according to requirement (As per custome design) Minimum 25mm dia to maximum in any size. Minimum 20 mm wide to maximum as many as provided.
Working Temperature :Applicable up to 600C
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

This multi size heating mantle has standard construction is used for same purpose. This multi purpose heating mantle construction provides a specially curved heating surface which ensures efficient heating of round & flat bottomed flasks of different sizes, provided with bottom outlet suitable for distillation, digestion, extraction etc. Multi size heating mantle has 2 or 3 heating circuits allowing the upper circuits to be switched of when smaller flasks are used or the level of the liquid in the vessel drops down. Also can be supplied with built in energy regulator for controlling the rate of heating.
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

Uses :As heating elaments for Dies Moulds, Paterns, Plastic Injection & Extrusion Barrels, Packaging, Soldering & Bending Irons Forming of metals & plastic sheets & various other applications demanding localised heating in works areas for heating, melting, forming or stamping metal or other material.
Construction :Generally, brass & S.S. is used as sheath but other high grade materials are also used for high temperature. Insulating medium is refrectory. Flexible wire or Screw type terminal connections are provided at one end and diameter & length of heater are as provided at one end & diameter & length of heater are as per specification given by customers. These cartridges are designed for horizontal mounting.
Working Temperature :App. 280C
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

Uses :Plastic extruders, plastic molding, hot runner molds, shoe machinery, hot stamping, food processing, medical equipment, heating gases & liquids, packaging equipment, glue guns, molds &dies.
Construction :High density wattage permit smaller heater to be used with good life expectancy. This results in up front as well as long term cost savings.Swaged construction (after heater is constructed than diameter reduces) provides maximum support for resistance wire, eliminating the effort of vibration & shock vertical mounting is also possible.Excellent heat transfer characteristics permit improved life expectancy over other style heaters.Higher density heaters are constructed in SS or inconal tubes.
Working Temperature:Application upto 800C.
While Placing Order :Please mention diameter, length, wattage, voltage, lead wire length, special features if any.