Our Products
Technical Details
Compressor | Emerson Copland / Tecumseh India Hermetically sealed compressor |
---|---|
Compressor Capacity | 1/5 HP |
Condenser | Suitable for above compressor with suitable cooling fan & Fins and copper Tube Air Cooled. |
Expansion Device | Capillary tube& Filter / Drier |
Pressure Gauge | 2 Nos. for high and low pressure |
Service valves | 2 Nos. Hand set valve |
Evaporator Coil | SS Tank 30 liters capacity with copper tube & soldering |
Refrigerant | Freon – 134a |
Cooling Capacity | 20 liters |
Rotameter | Suitable for Compressor capacity Glass Tube Rotameter to measure the flow of liquid refrigerant gas. |
The Air Conditioning Test Rig unit is required to conduct experiments and demonstrate the process of cooling of atmospheric air. The unit Will be fitted with all instruments facilities so that temperature, pressure etc. may be measured at different points in the air conditioning system.
Technical Details
Compressor | Hermetically sealed compressor made of Emerson / Tecumseh . |
---|---|
Compressor Capacity | Compressor Capacity: 1 Ton |
Condenser | Forced Convection air cooled |
Condenser Fan Motor | Induction/Axial flow Type |
Drier/ Filter | Molecular sieve Type |
Expansion Device | Capillary Tube & Thermostatic expansion valve |
Refrigerant flow measurement | Glass Tube Rotameter |
Evaporator fan | Centrifugal/ axial flow type |
Dehumidifier or reheater | Finned type air heater & Mini Boiler (Power 2kw) |
Refrigerant | R-22 |
Temperature | 6 Chanel facility with digital display |
Construction Panel | Wall Mounted M.S. Plate |
Switch | Rotary switch for Fan. Rotary switch for Heater. Rotary switch for Humidity control |
Voltage | Single Phase 220 – 240 Volts 50Hz. AC Supply |
Input Power | 1.0 – 1.5 KW. |
Material | Mild Steel Sheet. |
Outer finish | Powder Coted |
Objective :
Introduction :
Domestic Refrigerator Test Rig
Double wall construction. Inner chamber made of stainless steel sheet. Supplied with removable perforted shelves. Exterior made out of thick mild steel sheet duly finished in white stoving enamel/powder coated paint with finished Colour combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Fitted by M.S (Mid-Steel) pipe and sheet stand.
The Air Conditioning Test Rig unit is required to conduct experiments and demonstrate the process of cooling of atmospheric air. The unit will be fitted with all instruments facilities so that temperature, pressure etc. may be measured at different points in the air conditioning system. Hermetic compressor of 1Ton Forced air condenser 1500 m3 / h Evaporator with 3-speed fan. Capillary-tube refrigerant regulation system & Adjusting the temperature using remote control operation.
Experimentation :
Utilities Required :
Technical Details
Compressor | Hermitically sealed compressor |
---|---|
Condenser | Air cooled compatible to 1 Ton compressor |
Condenser Cooling fan | Compatible capacity with permanentlubricated motor |
Pressure Gauge | 2 Nos. |
Evaporator | Made of copper tube and aluminum fins fitted with compatible capacity fan |
Safety Control | Over load and over current protection for compressor with Time delay circuit |
Expansion Device | Capillary Tube compatible capacity |
Temperature Sensor | RTD PT-100 Type |