My ExportersIndia

For Buyer

For Seller

For Help

Our Products

We are leaders in the market for providing best range of TEMPERATURE, Anti-Siphon Vaccum Breaker, UV B Lamp, MELSEC FX1N PLC Control Panel and Thermostatic Recirculate Group with Pump

TEMPERATURE

OPERATION INSTRUCTIONS

Using Method:Temperature & Pressure relief valves is suitable for bearing the pressing type solar water heater, gas heater, electrical heater, water heater of fuel, water heater of heat pump, sensitive function heater, etc. Various kinds of heaters (such as the boilers) and hot water containers, can lower the temperature and reduce pressure automatically, have temperature and pressure double safe protection function.

TECHNICAL PARAMETER
  • Standard Setting: 75, 87, 100, 125, 150psi (0.517, 0.6, 0.69, 0.86, 1.034MPa)
  • Temperature Relief: 210F (99C)
  • Dimensions / Weight

Can also confirm that exactly makes the pressure & exactly make temperature according to the needs of user's contract for future delivery.

INSTALLATION
Temperature and Pressure Relief Valves should be installed on the water heater top or side. The temperature sensing element must be immersed in the water within the top 6" of the tank.The eliminating pipeline should be installed under the relief valve. Its terminal station distance in floor drain should be greater than 6" to make it easily remove & observe water.

SAFEGUARD & MAINTENANCE

After installing, water heater users must lift the relief valve handle once at least every year, so as to ensure that unblocked things in the waterway of the relief valve. Before operating handles, please check the elimination pipeline which joining the relief valve guaranteed that the hot water from relief valve discharge the proper place, otherwise it may cause the bodily injure. If the handle is lifted, without water flowing out, it proves that the relief valve is invalid. Then it should turn off the water heater and ask pipeline personnel check and repair

Model ImportxExport
in

mm
B
mm
D
mm
T
mm
Weight
g
Temp.Steam
Rating BTU/hr
15 R½ x Rp½ 41 82 29 101 237 15,000
20 R¾ x Rp¾ 42 83 29 100 258 100.000







View Complete Details

Anti-Siphon Vaccum Breaker

HYDRAULIC FEATURES

The anti-siphon vacuum breaker is an inlet air-logged pressurized valve which opens when there is a pressure drop. The internal obturator disc is normally closed when the water in the valve is at a pressure equal or greater than the atmospheric pressure. The valve opens to permit air to enter, in case the water inlet pressure is lower than the atmospheric pressure and closes completely when the water flow returns to normal pressure. This device is used to avoid siphoning during draining phases in hydraulic plants. In systems that are not permanently connected to the water main, such as water distribution plants, this device keeps contaminated water from returning to the drinking water supply system. The CR brass body renders this device inert to the dezincification phenomenon. This device can be used in conditioning plants, sanitary installations for water supply outside buildings, according to EN 805, sanitary installations for water distribution inside buildings following EN 806-1, and irrigation systems. This product adheres to the standards set forth by the European health authorities for the transport of alimentary fluids and potable water.

TECHNICAL FEATURES
Pressure :
Maximum allowable working pressure (PN) 16 bar
Preset nominal pressure (Pnr) 0.2 bar (Grade A according to EN 12266-1)
Temperature :
Working temperature (TS) from 0 C (excluding ice) to 110 C
Compatible fluids :
Heat transfer fluids in compliance with Italian national standards (UNI 8065 6)
Glycolate solutions (glycol) 50%
Threading :
Pipeline connection Threads according to ISO 228/1
Requirements and tests as per :
Air vents, air return function EN 1074-4
Body pressure tightness EN 1982 B7
Seat tightness EN 1074-4 5.2.2
Pressure resistance EN 1074-4 5.1.1
Protection against pollution EN 1717
Protection unit family L type A
Categories of fluids EN1717 list 2
DESIGN
Design Cast bronze body EN 1982 - CB491K
Plug and valve in brass EN 12164 - CW614N
Seat gaskets SILICONE 40 Sh
O-ring NBR RUBBER
View Complete Details

UV B Lamp

the shape, structural, electrical characteristics are the same as those of general fluorescent lamps used for illumination* 1 after 100 hours lighting.* 2 when the ultraviolet ray output becomes 60% of the initial output (after 100 hours lighting).
warning

the radiation of those lamps is harmful to eyes and skin.protect your eyes and your skin against the ultraviolet rays.

uv-b lamps emit ultraviolet rays between 280nm and 360nm (at peak 306nm). The spectral energy distribution suits to test the ultraviolet resistance of paints, plastics and rubbers. They are also used for the special light sources for inspection and analysis.

View Complete Details

MELSEC FX1N PLC Control Panel

the fx1n's communications and data link capabilities make it ideal for applications where the size of the controller hardware, communications features, special functions and processing speed are all critical.
fx1n series highlights:
  • 14 to 128 inputs and outputs
  • high processing speed (0.55s per log. Instruction)
  • ample program storage capacity (8, 000 steps) and device ranges
  • integrated positioning controller
  • comprehensive range of special function and expansion modules for individual requirements
  • integrated pid controller
  • support for connection to open networks
  • integrated real-time clock
  • user-friendly programming with ms windows-based programming software package or hand-held programming unit
  • analog signal processing with optional expansion adapters
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us