Hospitals all over the world are realizing that on-site oxygen generation provides a highly reliable and economic solution for their oxygen requirements. Eliminate the expense of purchasing, receiving, and monitoring your hospital's oxygen supply. Costly overstock, manual handling injuries and expensive emergency cylinder deliveries all add to the expense.

• It is a new source of oxygen to the entire hospital.


• It does not involve any third party, for supply.


• The production depends on need, results in no wastage and expiry.


• Very cost effective compare to all existing sources.


• Oxygen produced by this system will confirm to United States Pharmacopeia (USP) XXII oxygen 93%(+-3) monograph.


• Hazardous risks of very high pressure, explosive and highly inflammability can be avoided using MOGS.

An OGSI Oxygen Generator is an on-site oxygen generating machine capable of producing oxygen on demand in accordance with your requirements. In effect, it separates the oxygen (21%) from the air it is provided and returns the nitrogen (78%) to the atmosphere through a waste gas muffler. The separation process employs a technology called Pressure Swing Adsorption (PSA). At the heart of this technology is a material called Molecular Sieve (Zeolite). This sieve is an inert, ceramic-like material that is designed to adsorb nitrogen more readily than oxygen. Each of the two beds that make up the generator contains this sieve. The process is described below.

• The MOGS Plant ensures the availability of O2on 24x7.


• No manual attention required to ensure the availability of O2.


• Our Smart PP Admin always ensures that correct purity and pressure at your outlet ports.


• PP Admin+ provides one push change over to high purity sources.

• Truly "MAKE IN INDIA"


• Provides ease of operation through complete electro-pneumatic control systems.


• Dual source selectable switch for bellow driving gas.


• Dual Selectatec bar with interlocking.


• Compact and Easy fill CO2absorber.


• Standard Mode: IPPV (Desired Volume by Pressure Regulation).


• Five tube rotameter with Gear Engaged Ratio Controller (GERC).


• Secondary safety: O2piloted N2O cutoff valve.


• Alarms: Electronic O2 Failure alarm with mute option, Airway pressure high and low alarm.


• Tidal volume from 50ml to 300ml with pediatric bellow and 300ml to 1500ml with adult bellow.


• Enhanced long duration power backup up to 120 minutes.


• 360orolling wheels with front stamp locking.


• Spacious trolley designed ergonomically.


• Suitable for pediatrics and adults


• Clear LED 7 segment display separately for Tidal volume, Airway pressure, Rate and I: E ratio.

• Excellent LED touch pad control system :
  LED touch pad control system is developed for adjusment control of power switch, brightness switch, illumination level, color temperature, color rendering index, to meet medical personnel requirement of variant operation.


• Cold infrared-free light :
  In comparison to conventional halogen and gas discharge lamps, the "cold" LED light allowing for fatigue-free operating and prevents tissue from drying out in the OT field at the head area of the surgeon


• Shadow free illumination :
  The relation between light body and light field diameter guarantees an optimum illumination of the OT field in terms of the area and depth.


• High Luminance with optimum color rendering :
  Designed to provide a light output with a color rendering index and color temperature which is very close to natural daylight. This helps the surgeon to distinguish between pathological and healthy tissue.


• Optimum design for clean air ceilings (Laminar Air Flow) :
  The perfect design reduce the airflow surface beneath the ventilated ceiling, Flow- optimized light head and reduced surface temperature minimize turbulence in laminar air flow.


• Long-lasting light sources, environmentally friendly :
  With a life cycle of at least 50, 000 operational hours, an LED provide illumination many times longer the conventional lighting. In addtion, each LED can be replaced indivdually and on site.

• Luminance : 30, 000 Lux in each petal (3 petals per Dome).


• Spot diameter : 150mm - 200mm.


• Illumination depth : >1000mm.


• Operational distance : 800mm - 1100mm.


• Temperature at 1 meter level : < 1oC.


• Input power supply : 220VAC at 50Hz.


• Rated input power : 36W/dome.


• Number of LED's per dome : 36 LED's each of 1W.


• LED life : >50, 000hours.


• Minimum installation height : 3000mm.


• CRI : 96.