GST : 24ABOPD1787C1ZU
Write a Review
Our Products
Our product range contains a wide range of Two Pully Flexing Test Apparatus, BALL PRESSURE TEST APPARATUS, Abrasion Test Apparatus for Cable, Two Flexing Test Apparatus and Flammability Test UL 94 Apparatus
Tow pully flexing test apparatus is use for cable flexing strength.
Additional Information:
Payment Terms : T/T
Delivery Time : 4 WEEK
ball pressure apparatus is used for testing parts of non-metallic materials for resistance to heat. it is applicable to electrotechnical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics. ball pressure apparatus is the requirement ball(r2.5mm) and total test force 20n0.2n ball pressure testing device , pressure level of the state and was placed in the heating chamber on the surface of the test.
Additional Information:
Payment Terms : T/T
Delivery Time : 1 WEEK
This Test Abration Test Apparatus is use for cable abration test.
Additional Information:
Payment Terms : T/T
Delivery Time : 4 week
this two pully flexing test apparatus is use for cable flexing test.
.Additional Information:
Payment Terms : T/T
Delivery Time : 6 week
The UL 94 Flammability Test Apparatus is widely used for testing the electrical and electronic product like lighting equipment, low-voltage apparatus and electrotechnical instrument.
Additional Information:
Payment Terms : T/T
Packaging Details : As per customer requirment
Delivery Time : 4 week
This three pully fexing test equipment is use for cable flexing test.
Additional Information:
Payment Terms : T/T
Delivery Time : 4 WEEK
Oscillating tube tester is designed and manufactured in accordance with the standard requirement of IEC60529 IPX3 and IPX4. It is used for the waterproof test of the electrical equipment. The oscillating tube part of this device is controlled by PLC motor mechanism. This device is reciprocating swing from the place of ±60°to another one of ±170°with the speed required by the standard through machine adjusting angle. The angle adjustment is accurate. The structure is stable and durable. It is equipped with rotating stage through which the rotating of 90°can be achieved.
Additional Information:
Payment Terms : T/T
Packaging Details : As per customer detail
Delivery Time : 4 week
The Needle Flam Test Apparatus is widely used for testing the electrical and electronic product like lighting equipment, low-voltage apparatus and electrotechnical instrument.
Additional Information:
Payment Terms : T/T
Packaging Details : As per customer requirment
Delivery Time : 2 week
The Secureness Test Apparatus application is Checking of connector, MCB, RCCB, Lug cable clamping.
Additional Information:
Payment Terms : T/T
Packaging Details : As per customer requirment
Delivery Time : 4 week
The test is an alternative to cold bend test.Most materials when exposed to extreme cold over a period of time become hard and britle. This test is designed to study the effect of cold tempertures on material under mechincal shock.
Additional Information:
Payment Terms : T/T
Delivery Time : 4 week
The glow wire test chamber is widely used for testing the electrical and electronic product like lighting equipment, low-voltage apparatus and electrotechnical instrument.
Additional Information:
Payment Terms : T/T
Packaging Details : As per customer requirment
Delivery Time : 4 week
This equipment is use for cable elongation test
Additional Information:
Payment Terms : T/T
Delivery Time : 4 week
thisbanding test apparatus use for conduit pipe. for banding test of conduit pipe.
Additional Information:
Payment Terms : T/T
Delivery Time : 5 week
the cable gland anchorage twist test apparatus is use for strength of gland.
.Additional Information:
Payment Terms : T/T
Delivery Time : 3 Week
Laboratory Hot Set Test Apparatus is designed to determine the Elongation & permanent set of insulation of electric cables under specified conditions of load, temperature and airflow.
A double walled cabinet with inside chamber of stainless steel and outside of mild steel fully powder coated inner dimensions of the chamber are 450 mm x 450 mm x 450 cm (LxBxH). The door is fitted with a glass to observe the specimen under test.
Temperature Range of oven is Ambient to 300 ± 2C at sensor point. Controlled by Digital Temperature Indicating Controller.
Additional Information:
Payment Terms : T/T
Packaging Details : As per customer requirment
Delivery Time : 4 week
This Hot Set Oven is use for tensile test of material in high temprature.
Additional Information:
Payment Terms : T/T
Delivery Time : 6 week
the endurance test apparatus application is endurance test of mcb, mccb, rccb, emergency switch , selector switch etc.
.
Additional Information:
Payment Terms : T/T
Delivery Time : 3 WEEK
The CKE Vertical Rain Test apparatus is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard requirement of IEC60529 clause IPX1 and IPX2.The rise and fall of the drip box is controlled by the motor. It is equipped with the rotatable objective table whose rotating speed is 1r/min for IPX1 test. It is also equipped with 15°bevel for supporting sample for the IPX2 test.
Additional Information:
Payment Terms : T/T
Packaging Details : As per customer requirement
Delivery Time : 4 week
This Flexing test apparatus is design as per UL 1582. Its use for checking flexibiity of cable.
Additional Information:
Payment Terms : T/T
Delivery Time : 5 week
package impact drop testing machineis used to measure the dropping impact incidence when the package in using, transportation and decorating. besides precision plane drop testing, it also can undertake edge and angle test to ensure the complete performance evaluation for the package.
.
Additional Information:
Payment Terms : T/T
Delivery Time : 4 WEEK
ul rain test apparatus for outdoor electrical enclosure waterproof test.for test laboratory, manufacturer or product designing use, to check the enclosure waterproof of outdoor installed equipment, such as street lighting fixtures and control panels etc, similar to iec 60529 ip code testing.
.
Additional Information:
Payment Terms : T/T
Delivery Time : 4 week
This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord is adequately protected against excessive flexing where it enters the appliance. This does not apply for appliances with automatic cord reels.
Additional Information:
Payment Terms : T/T
Packaging Details : As per customer requirment
Delivery Time : 4 week
The Cord retention test apparatus is use for strength of gland.
Additional Information:
Payment Terms : T/T
Delivery Time : 2 week
this test conforms to the standard requirements of iec540. It is used for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test.
the diameter of the mandrel shall be between 4 and 5 times the diameter of the test piece
Additional Information:
Payment Terms : T/T
Delivery Time : 3 Week
The Cable gland anchorage pull test apparatus is use for strength of gland.
Additional Information:
Payment Terms : T/T
Delivery Time : 3 Week
the cable gland anchorage twist test apparatus is use for strength of gland.
.Additional Information:
Payment Terms : T/T
Delivery Time : 3 Week
Mr Anand Darji (C.K. ENTERPRISES)
Plot No -9 Rajdeep Industrial Estate IN Jin Compound, Itola, Vadodara - 391243, Makarpura, Gujarat
Share us via
