Integrated with water treatment system, iron removal filters effectively remove high iron ions from the water. We have iron removal filters for industrial, commercial and residential applications. These filters also remove manganese and hydrogen sulfide content as well as other industrial contaminants. Our iron removal filters have catalytic filtration unit to dissolve ferrous iron salts and precipitate over the filter bed. The iron removal filters are made of mild steel, stainless steel and FRP.

The Iron Removal Filter is used tom reduce the quantity of iron from water. The Iron Removal Water Filter also removes manganese and hydrogen sulfide content, which are hazardous for health. The Iron Removal Filter System is frequently used in hotels, tea gardens, households, P.H.E, industries etc. We are an internationally an acclaimed Exporter and among the prominent Suppliers of Iron Removal Filter in India. Application

Hotels

Hospital

P.H.E.

Housing Flats

Tea Garden

Industry

The Bag Filter Systems are basically used to remove particulate materials from form the process and also general ventilation air so that valuable products can be recovered. The Air Bag Filters offered by us are of the sophisticated types and hence are very much performance oriented. We are a globally acclaimed Manufacturer and Exporter of Bag Filters in India. INLET CHOICES The bag house collector design / offers either top entry or hopper entry to meet the needs of your applications. For fine dust with low dust concentrations and with higher air-to-fabric ratios, top entry is more suitable. Top entry generates a down flow of air throughout the collector, due to which it aids the movement of particles towards the hopper. In case of course dust and high dust loads, hopper entry is preferred. Heavy particles naturally gravitate to the hopper. PULSE-JET CLEANING The filter bags in the collector are continuously cleaned with pulses of compressed air which are initiated by an electronic sequential timer. Small volumes of high pressure compressed air are directed from a reservoir tank through solenoid valves and nozzles. As the burst of air passes through the venturi at the top of each bag, it induces a larger volume of additional air into the clean face side of the bag, inflating the fabric bag and breaking the dust layer on the outer face of the bag. The fabric gets a secondary cleaning as the pulse bounces back up the bag. Pulse-jet cleaning provides an effective means of reconditioning the fabric without interrupting the normal airflow through the filter system. Since the pulse-jet collectors operate at higher filtering velocities than the corresponding fabric collectors which are cleaned either by mechanical shaking or low pressure reverse air. CONVENIENT BAG REMOVAL In most of the conventional bag filter systems filter bags are removed from the top side, which means first the top assembly, including venturies, etc., has to be opened or dismantled, and then each bag has to be lifted up. The operation requires several persons working for several days. Moreover, the user has to ensure that the height of the ceiling should be at least double the height of the bag filter system. Pulsejet filter from CLEAR IONS are designed in such a way that the bags can be removed from the side panels of the collector, without having to dismantle any part, which means that the bags can be removed by a single person in a matter of a few minutes. PRESSURE-DROP ACROSS THE COLLECTOR Since the bags are continously cleaned the pressure drop is very low and almost constant. Though the pressure drop will depend upon factors like air-to-fabric ratio, temperature of air, dust loading, finess of dust, etc., normally it will range between 75 to 150 mm WG. COMPRESSED AIR REQUIREMENT Bag filter collectors are designed for optimal use of compressed air for bag cleaning. The actual air consumption will depend upon various parameters of the final applications, such as dust loading, air-to-fabric ratio, type of filter media used, etc. MATERIAL OF CONSTRUCTION The standard material used for the construction of Pulsejet Bag Filter is mild steel treated for rust prevention, double coated with red oxide primer and painted in color of your choice. Special materials of construction like SS/ PVC/ FRP lined can be used to meet the application requirements. SUPPORT STRUCTURE The system is built with self-supporting strong structure out of steel sections. The ground clearance under the hopper outlet flange, is kept around 1000 mm, though it can be designed to provide any clearance as per your requirements. FILTER MEDIA For general applications heavyweight "Non-woven, needled, felt media" is used for high collection efficiency and long life. Felts with special surface finishes to suit physical and chemical nature of the the dust to be handled and humidity and temperature of the air, are also to look upon. EXPLOSION VENTS Explosion vents, to prevent loss due to explosion accidents, are fitted as a standard. While requesting for a quote, please indicate the following: Air handling capacity required

• Volume of fluegases
• Dust loading capacity required
• Type and fineness of dust to be handled
• Inlet temprature of Dust / gases
• Layout plan showing smoke / Dust / Gases Generating machine
• Area allocated for Air pollution system control