3 C- Link Technology Co. Ltd

Shenzhen China, China

We offer pipe locator, cable locator.our optical & cable locators scan the ground and use radio frequency signal to locate those under ground telecom lines, fibers, catv, power cable, gas pipes, etc. Th e3c- tam3000 locator consists of two basic units: a directional radio frequency transmitter and a receiver. We utilize the principle of electromagnetism. The electromagnetic method is a well-test and most popular method in underground utility survey function: to detect underground cable/pipe /position and depth; to locate position of hidden cable/pipe. underground locators needed to do little more than find buried water, gas, or sewer lines. Today, locating has become more complex as telecommunications cables join utility lines in the underground environment. Surprisingly, though, 3c-link underground cable locators rely on the same basic technology found in their early counterparts--injecting an electrical signal onto the cable being located main features 1 measure and pinpoint sheath and conductor faults, locate cable path/depth quickly and easily. With this lightweight, easy-to-handle unit.2 four modes of operation for accurate locates, even in congested areas.3 precisely locates 4 a simple, easy-to-use system.5 led display specifications: benefits transmitter four operator-selectable frequenciesoptimizes unit performance in varying conditions simultaneous signalsenables receiver to verify cable location built-in ohmmeter with voltage sensing/measuring capabilitydisplays earth fault resistance; confirms far-end grounds and shield continuity three signal application methods (direct connect, coupler, induction)flexibility under varying plant conditions auto load matchingautomatic adjustment of output voltage to maximize signal high and normal output levelhigh output level for extreme distance locates and other varying cable conditions audible indication of hazardous voltage in ohms modewarns operator of potentially dangerous situation can connect to energized power cables up to 220 vacprevents inadvertent damage to unit; operates while attached to live circuits receiver peak and null modesverify cable location differential modeindicates direction to cable push-button digital depth readout (of cable or sonde) in centimeters, inches, or feet and incheseasy, quick and accurate depth measurements; no conversion table required for sonde depth measurements measures signal current in cablehelps identify target cable regardless of depth visual and audible cable locatesensure accuracy under varying field conditions digital fault strength indicatoroperator can differentiate between light and severe faults coupler jackpair/cable identification graphic displayoperator can distinguish between target cable and other cables in congested areas expander functionimproves sensitivity of audible and visual response 50/60 hz passive power and passive vlf modelocates cables using receiver only physical specifications size transmitter receiver16 cm x 16 cm x 39 cm 70 cm x 20 cm x 11 cm weight transmitter receiver 3.6 kg (5.88 lbs.) 2 kg (3.98 lbs.) receiver frequencies trace mode tone modeactive: 577 hz, 8 khz, 33 khz, 133 khz passive: power -50/60 hz, user-selectable; 577 hz and 133 khz pulsed at 8 hz powersix alkaline lr6 (aa) cells typical battery life8 hours transmitter output frequencies trace mode sheath fault mode tone mode induction mode 577 hz, 8 khz, 33 khz, 133 khz 4/8 hz for sheath fault; 577 hz and 33 khz for tracing 577 hz and 133 khz pulsed at 8 hz 133 khz output voltage (maximum) sheath fault trace tone 30 vrms 30 vrms normal setting: 10 vrms high setting: 30 vrms output powernormal setting: limited to 0.5 w high setting: limited to 6w output protection240 vrms power8 alkaline lr14 (c) cells typical battery life4-8hours