Addnew Hydropower Limited

We are offering water turbine for hydroelectric power plant. Inclined-jet turbine: the pressure energy of water flow is changed to velocity energy by the nozzle, since leaving the nozzle, the water flow is not in a closed system, but forms the free jet in the spiral casing filled with atmosphere, and at the same time there are 3-4 buckets receiving the free jet from the same nozzle with unequal-sized discharge. There was a fixed angle (usually take 22.5 degree) between the jet center of nozzle exit and the inlet water plane of runner. characteristics and application scope of inclined-jet turbine: application scope of heads: 15m300mapplicable discharges: q=0.0898.30m3srunner diameters: 0.05m 5minstallable capacity: 500kw 6000kwspecific ratio speed: 18 45 we also providing different kinds of water turbine generator: 1.francis turbine 2.pelton turbine 3.inclined-jet water turbine 4.cross flow water turbine 5.tubular water turbine company introductionfound in 1958, our factory in hydropower products has continuously been one of the national strategic turbine manufacturers in china since year 1995. It has now 246, 000 square meters ground area and 68, 000 square meters office building area. With over 500 workers and over 200 technicians and engineers, addnew's invested factory is certificated by iso9000-2000 and ce. from the start of 2005 to the end of 2012, addnew and our factory in hunan, china have designed, manufactured and installed successfully over 170 small hydroelectric power stations in albania, chili, congo, india, lithuania, kazakhstan, vietnam, zambia and other overseas markets. The equipments adopted for those hydropower stations are unit-capacity from 800kw to 100mw and the total power generating capacities of each station ranging from 1600kw-200mw. All the completed stations are now maintaining their peak performance after their installations.

We are offering tubular turbine for hydroelectric power plant. The tubular type turbines are usually the best choices for exploitation of tidal power and hydraulic power with extremely low heads and extremely large flow rates. They have the advantages such as large discharge, high flow speed, high efficiency and less excavation, etc. Their variations have bulb, pit, siphon and s types according to their structural types. The water diversion parts, runner and water drainage parts of tubular turbine are on one axial line. The water flow directly and straightly through the runner without spiral casing. The water flow is axial from the pipe inlet to the draft tube outlet. Tubular turbine generally has two categories: fully tubular and half tubular. The half tubular turbine is divided into bulb, pit and shaft extension types, etc. Application scopeapplication scope of heads: 2m25mrunner diameters: 1.0m 7.2minstallable capacity: 200kw 200000kw we also providing different kinds of water turbine generator: 1.francis turbine 2.pelton turbine 3.inclined-jet water turbine 4.cross flow water turbine 5.tubular water turbine company introductionfound in 1958, our factory in hydropower products has continuously been one of the national strategic turbine manufacturers in china since year 1995. It has now 246, 000 square meters ground area and 68, 000 square meters office building area. With over 500 workers and over 200 technicians and engineers, addnew's invested factory is certificated by iso9000-2000 and ce.

We are offering kaplan turbine for hydroelectric power plant. The kaplan turbine is an inward flow reaction turbine, which means that the working fluid changes pressure as it moves through the turbine and gives up its energy. Power is recovered from both the hydrostatic head and from the kinetic energy of the flowing water. The design combines features of radial and axial turbines. Its main parts usually include blades, hub, main shaft, runner cone, rotating mechanism.Kaplan turbines are now widely used throughout the world in high-flow, low-head power production. The kaplan turbine was an evolution of the francis turbine. Its invention allowed efficient power production in low-head applications that was not possible with francis turbines. According to whether the runner blade is movable or not in operation, it is divided into two categories: axial movable-blade type and axial fixed-blade type. Application scopeapplication scope of heads: 10m70mrunner diameters: 2.0m11.0minstallable capacity: 500kw 200000kwspecific ratio speed: 200 850 we also providing different kinds of water turbine generator: 1.francis turbine 2.pelton turbine 3.inclined-jet water turbine 4.cross flow water turbine 5.tubular water turbine company introductionfound in 1958, our factory in hydropower products has continuously been one of the national strategic turbine manufacturers in china since year 1995. It has now 246, 000 square meters ground area and 68, 000 square meters office building area. With over 500 workers and over 200 technicians and engineers, addnew's invested factory is certificated by iso9000-2000 and ce.

We are offering pelton turbine for hydroelectric power plant.Introduction of pelton turbine the pelton type turbine is usually the preferred turbine for hydropower, when the available water source has relatively high hydraulic head at low flow rates, where the pelton wheel is most efficient. They have the advantages such as compact structure, small size, high efficiency, low operation maintenance cost, low cost because of less excavation and less investments, etc. And disadvantages like inadequate energy recovery and lower efficiency than other types of turbines. application scopeapplication scope of head: 80m1200mrunner diameter: 0.6 m 3.5minstallable capacity: 200kw 80000kw theirs shaft arrangements are either vertical or horizontal and they may have single nozzle, twin or multi-nozzles. With characteristics such as high head, big capacity, multi-nozzle and good structure, etc. Composition of pelton turbinenozzle, runner, support parts and deflector parts.Major components: rotating parts(runner, main shaft etc), nozzle parts(nozzle and related control), seat parts(seat, cover, spiral casing etc), pipeline parts(distributing pipe, brake piping, expansion joint etc), bearing parts and others. Core part is the runner and nozzle for structure

We are offering francis turbine for hydroelectric power plant.Introduction of kaplan turbine the kaplan turbine is an inward flow reaction turbine, which means that the working fluid changes pressure as it moves through the turbine and gives up its energy. Power is recovered from both the hydrostatic head and from the kinetic energy of the flowing water. The design combines features of radial and axial turbines. Its main parts usually include blades, hub, main shaft, runner cone, rotating mechanism.Kaplan turbines are now widely used throughout the world in high-flow, low-head power production. The kaplan turbine was an evolution of the francis turbine. Its invention allowed efficient power production in low-head applications that was not possible with francis turbines. According to whether the runner blade is movable or not in operation, it is divided into two categories: axial movable-blade type and axial fixed-blade type. Application scopeapplication scope of heads: 10m70mrunner diameters: 2.0m11.0minstallable capacity: 500kw 200000kwspecific ratio speed: 200 850 we also providing different kinds of water turbine generator: 1.francis turbine 2.pelton turbine 3.inclined-jet water turbine 4.cross flow water turbine 5.tubular water turbine company introductionfound in 1958, our factory in hydropower products has continuously been one of the national strategic turbine manufacturers in china since year 1995. It has now 246, 000 square meters ground area and 68, 000 square meters office building area. With over 500 workers and over 200 technicians and engineers, addnew's invested factory is certificated by iso9000-2000 and ce.