Beijing Haihua Boyuan Science and Technology Development Co. Ltd

Beijing, China

We are offering Hot Sale Sanyo New Product Thb8128-stepper Motor Driver Ic. 1. Application: PWM current control stepping motor driver2. Package: HZIP25 (See attached case outline dimensions.)3. Features1 channel PWM current control stepping motor driverBiCDMOS process ICOutput on-resistance( High side 0.25, Low side 0.15, Total 0.40 ; Ta = 25, Io = 4.0 A)Selectable phase drive (1/2, 1/8, 1/16, 1/32, 1/64 1/128 1/10 1/20step) Advance the excitation step with the only step signal input Available forward reverse controlIomax=4.3AOver current protection circuitThermal shutdown circuitInput pull down resistanceWith reset pin and enable pin.

We are offering stepper motor driver ic. 1. Application: pwm current control stepping motor driver2. Package: mfp30kr3. Features1 channel pwm current control stepping motor driverbicdmos process icoutput on-resistance( high side 0.3 , low side 0.25 , total 0.55 ; ta = 25c, io = 2.0 a)2, 1-2, w1-2, 2w1-2, 4w1-2, 8w1-2, 16w1-2, 32w1-2 phase excitation are selectableadvance the excitation step with the only step signal input available forward reverse controliomax=2.2aover current protection circuitthermal shutdown circuitinput pull down resistancewith reset pin and enable pin.

We are offering Stepper Motor Driver Ic. Stepper Motor Controller THB6064AH Semiconductor Active IC The THB6064AH is a PWM chopper-type sinusoidal micro-step bipolar stepping motor driver IC. It supports 8 kind of excitation modes and forward/reverse mode and is capable of low-vibration, high-performance drive of 2-phase bipolar type stepping motors using only a clock signal. Features Single-chip bipolar sinusoidal micro-step stepping motor driver Uses high withstand voltage BICD process: Ron (upper + lower) 0.4 (typ.) Forward and reverse rotation control available Selectable phase drive (1/2, 1/8, 1/10, 1/16, 1/20, 1/32, 1/40, 1/64 step) Output monitor pins (DOWN / ALERT) Equipped with reset and enable pins Built-in thermal shutdown(TSD) and over-current detection(ISD) circuit Parameter High output withstand voltage: VDSS 50 V High output current: Iout 4.5 A (peak) Packages: HZIP25-P-1.27 Dementions:3.6*1.4*0.5 cm Weight:9.86g.

We are offering Stepper Motor Driver Ic. 1. Case Outline: 19 pins (See attached case outline dimensions.)2. Function: PWM current control stepping motor driver3. Application: Industrial equipment etc. 4. Features:*Output on-resistance (High side 0.3ohm, Low side 0.25ohm, Total 0.55ohm; Ta = 25, IO = 2.5A)*VMmax=40V(DC)Iopmax=3.3A*2, 1-2, W1-2, 2W1-2, 4W1-2, 8W1-2, 16W1-2, 32W1-2 phase excitation are selectable*With built-in automatic half current maintenance energizing function*Over current protection circuit*Thermal shutdown circuit*Input pull down resistance*With reset pin and enable pin.