China Dongfang Metal Co,. ltd

We Offer ferromolybdenum. 1.Composition:Fe, Mn, Si, S, P, C, Cu, Sb, Sn 2.Brand:FeMo70, FeMo70Cu1, 3.Size range:10 to 150mm 4.Make stainless, heatresistant steel Application:FERROMOLYBDENUM 70 is mainly used to add molybdenum to steel in steel making

We offer ferroaluminium. 1.Composition:Fe, Al, Si, Mn, C, P, S 2.Brand:FeAl40, FeAl45 3.Its density is higher than the density of pure aluminum 4.Deoxidizer Properties: Ferro Aluminum is a kind of complex deoxidizer. Its density is higher than the density of pure aluminum.

We Offer Silicon manganese is composed of manganese, silicon, iron and other elements with a small amount of carbon and other kinds of alloy. It is widely used with a large production. Silicon in Silicon-manganese has strong affinity with manganese and oxygen. Deoxidation products MnSiO3 & MnSiO4 produced in the steelmaking procedure has a temperature of 1270°C and 1327°Crespectively. They both have the advantages such as a low melting point, large particles, easy floating, and good deoxidization effect etc. Under the same conditions, the burning loss rates of silicon and manganese were 46% and 37% respectively. But with the silicon-manganese alloy, the burning loss rate is 29%.

We offer ferrochromium. 1.Chemical composition:Si, Fe, Al, Ca, P, S 2.Type;High, Medium, low, Micro Carbon 3.Brand:FeCr67C6.0, FeCr55C600, etc 4.Size: The quality of each piece should not be more than 15kg and its size range is less than 20mm×20mm. the amount of debris whose size is less than 20mm×20mm should not exceed 5% of the total quality of this batch of products.

We Offer Ferrovanadium is a significant additive in steelmaking industry. Brief introduction: Ferrovanadium which consists of vanadium and iron is widely used in steelmaking as the alloy additive, high-vanadium Ferrovanadium could be used as the additive in the non-ferrous alloy.The most commonly used including 40% Fev, 60%Fev and 80% Fev

• MOQ 20 Ton

We Offer Ferrosilicon is iron alloy composed of iron and silicon. Ferrosilicon is silicon iron alloys that made of coke, steel scrap, quartz (or silica) by iron smelting furnace. Silicon and oxygen is easy to combine in silica, so it is often used in steelmaking as deoxidizer. Meanwhile, when generating SiO2 , lots of heat is given off. So it is helpful to raise the liquid steel temperature when deoxidizing