Choice Topia International Ltd

Shanghai, China

For permanent fog- free mirror heating pads with electric demister plate simply stick one of our self adhesive fog- free mirror heating pads with electric demister plate to the back of any bathroom mirror & connected to the lighting circuit. Our self adhesive fog- free mirror heating pads with electric demister plates are suitable for direct application to a mirror and connected to a suitable lighting circuit or it's own power supply. Fitting your fog- free mirror heating pads with electric demister plateMark out the back of the mirror to indicate where the modern fog free shower mirror is to be fitted 1. Peel off the protective paper exposing the 'sticky' side 2. Position one edge of the electric mirror fog free pads in the desired position on the keeping the other edge away from the mirror 3. Gradually lower the modern shower mirror fog free onto the mirror applying even pressure to ensure there are no air bubbles or creases 4. If the mirror is not framed & is being fitted directly onto the wall, a small recess will need to be made in the wall to compensate for this & allow the mirror to sit flush

Mirror Heating Pads for Backlit Bathroomfeatures 1.economical : Mirror Heating Pads for Backlit Bathroom Exceptionally Low Temperature Ensures that the Running Costs are Minimal. if Left On for An Hour a Day, An Average Mirror Defogger Pad Will Cost Between 2 or 3 Cents per Week to Operate.2.permanent: Mirror Heating Pads for Backlit Bathroom No Need to Apply Chemicals or Coatings.3.efficient : the Equivalent of Running a Light Bulb.4.quickly Warms: Once the Electricity Flows Through the Heating Pad, It Takes Only 2 to 3 Minutes to Warm Up the Surface of the Mirror.5.safe to Use: Low Surface Temperature Won't Burn Skin. Nrg Mirror Defogging Pads Ce and Ip54 Approved.6.easy to Fit: Mount Flush with Surround Tile and Wire to a Switched Outlet.simplicity :no Transformer or Thermostat is Required. Just Wire It Into the Light Circuit