Dalian, China
Write a Review
Our Products
Our product range contains a wide range of Water Activity Meter, Gas Turbine Flow Meter ZERO100TB and Ultrasonic Level Meter
measurement: first, put the object needing measurement into glassware (the object needing measurement shall be cut up as possible, and it shall account for 50%80% of the volume of the glassware. During measurement, the glassware must not be covered with cover glass.), then put the glassware into water activity sensor and make the sensor covered. Select the measurement function and press enter key, then the water activity detector will be in measuring status. The measurement time shall be 10 30 min (settable). During measurement, the options of water activity, temperature, measurement time and printing will be indicated. The printing option includes printing (printing after the measurement is completed or press enter key to print the real time data during measurement), no printing and stop measurement, and this option can be selected with the selection key. after the measurement is completed, the instrument will indicate and print the final measuring results. At this time, the enter key can be pressed to return to the homepage, so as to prepare for nextmeasurement.
This manual will assist you in installing, using and maintaining your flow meter. It is your responsibility to make sure that all operators have access to adequate instructions about safe operating and maintenance procedure.
Operating Principle:
Gas flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. This signal is converted into engineering units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional accessory modules can be used to export the signal to other equipment.
Upon receipt, examine your meter for visible damage. The turbine is a precision measuring instrument and should be handled carefully. Remove the protective plugs and caps for a thorough inspection. If any items are damaged or missing, contact
Make sure the turbine flow model meets your specific needs. For your future reference, it might be useful to record this information on nameplate in the manual in case it becomes unreadable on the turbine. Refer to the nameplate for your customized product’s specification.
Mr. Michael Sun (Dalian Zero Instrument Technology Co., Ltd China)Room 4605 No.9-1, Haifu Road, Dalian Bonded Area, Pilot Free Trade Zone, Liaoning - 116001, China
Share us via
