Dalian Thrive Mining Co. Ltd.

Dalian, China

We are offering graphite plate for fluorine gas. carbon plates work as the exclusive anode material in electrolytic cells for generating fluorine gas or sulfur hexafluoride gas production raw material: high quality petroleum coke & coal tar pitch. extruded, carbonized and impregnated under precise technical control. applicationsthese carbon plates work as the exclusive anode material in the electrolytic cells for generating fluorine gas or sulfur hexafluoride gas. programmable properties1.high density and high mechanical strength 2.good electrical conductivity 3.corrosion resistance to fluorine and hydrogen fluoride 4.good wettability to the electrolytes typical sizes600x180x50 mm, 600x180x40 mm, 600x300x70 mmother sizes are available on request

We are offering fine grain size graphite.fine grain homogeneous structure high density excellent thermal conductivity high mechanical strength 1.applications - molds, chutes, sleeves, sheathes, linings, etc. In continuous casting systems for making shaped steel, cast iron, copper, aluminum. - sintering molds for cemented carbides and diamond tools. - sintering molds for electronic components. - electrodes for edm. - heaters, heat shields, crucibles, boats in some industrial furnaces (such as furnaces for pulling monocrystalline silicon or optical fibers). - bearings and seals in pumps, turbines and motors. - and so on. 2.programmable properties - fine grain - homogeneous structure - high density - excellent thermal conductivity - high mechanical strength - proper electrical conductivity - minimum wettability to molten metals 3.typical sizes blockslength x width x thickness (mm) 200x200x70, 250x130x100, 300x150x100, 280x140x110, 400x120x120, 300x200x120, 780x210x120, 330x260x120, 650x200x135, 650x210x135, 380x290x140, 500x150x150, 350x300x150, 670x300x150, 400x170x160, 550x260x160, 490x300x180, 600x400x200, 400x400x400 roundsdiameter (mm): 60, 100, 125, 135, 150, 200, 250, 300, 330, 400, 455 thickness (mm): 100, 135, 180, 220, 250, 300, 450 * other dimensions are available on request.

We are offering graphite bar.carbon graphite rod(iso9001:2008) 1.raw material: high quality petroleum coke 2.dia:35-300mm 3.length:550-2200mm carbon graphite rod electrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts productionraw material: high quality petroleum coke. extruded, baked, impregnated and graphitized under precise technical control. applicationselectrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts, etc. In metallurgy, mechanical engineering, chemical & electrochemical industry, energy management, glass & ceramics, transportation and other industries. programmable properties1)medium and/or fine grain 2)high density and high mechanical strength3)high thermal and chemical resistance 4)high resistance to thermal shock5)proper electrical conductivity6)minimum wettability to molten metals and glass typical sizesdiameter (mm) 35, 40, 45, 50, 60, 75, 100, 120, 150, 175, 200, 250, 300length (mm) 550 2200 other diameters and lengths are available on request.

We are offering mini graphite rod.1.diameter (mm) 2-30 2.length (mm) 300-600 3.density:1.72-1.85g/cc 4.ash:0.05-0.5% iso9001:2008standard mini graphite rod electrodes, anodes, cathodes, resistors, whisking rods, special structural parts, etc. In various industries applications electrodes, anodes, cathodes, resistors, whisking rods, special structural parts, etc. In metallurgy, mechanical engineering, chemical & electrochemical industry, glass & ceramics and other industries. programmable propertiesfine grain high density and high mechanical strengthhigh thermal and chemical resistancehigh resistance to thermal shockproper electrical conductivity typical sizesdiameter (mm) 2-30length (mm) 300-600other diameters and lengths are available on request.

We are offering graphite round. for hot pressing molds, centrifugal casting molds, pressure casting molds, fused refractory molds, heat exchangers, etc. production - raw material: high quality petroleum coke & coal tar pitch. - vibration-molded or extruded, carbonized and graphitized under precise technical control. - usually machined to specific shapes for various purposes. applications - molds: hot pressing molds, static casting molds, centrifugal casting molds, pressure casting molds, etc. - furnace parts: resistance heating elements, induction susceptors, structural elements and charging plates, furnace linings, heat shields and covers for pulling monocrystalline silicon or optical fibers, etc. - parts for heat exchangers. - crucibles for melting and reduction. - boats and trays for sintering, etc. programmable properties - high thermal and chemical resistance. - good thermal conductivity. - low coefficient of thermal expansion. - minimal wettability to molten metals. typical sizes - diameter (mm): 630 to 1420 - thickness (mm): 400 to 600.

We are offering graphite rod. Our graphite rods are mainly used to produce quartz crucible as conductors. our graphite rods are mainly used to produce quartz crucible as conductors, our sizes and lengths could produce according to customers' request, welcome to visit our plant to check our capacity and quality.

We are offering small graphite rod. 1.diameter:35-300mm 2.length:550-2200mm 3.compressive strength:20-55mpa 4.bending strength :10-30mpa 5.elastic modulus :9-21 graphite rod electrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts productionraw material: high quality petroleum coke. extruded, baked, impregnated and graphitized under precise technical control. applicationselectrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts, etc. In metallurgy, mechanical engineering, chemical & electrochemical industry, energy management, glass & ceramics, transportation and other industries. programmable propertiesmedium and/or fine grain high density and high mechanical strengthhigh thermal and chemical resistance high resistance to thermal shockproper electrical conductivityminimum wettability to molten metals and glass typical sizesdiameter (mm) 35, 40, 45, 50, 60, 75, 100, 120, 150, 175, 200, 250, 300length (mm) 550 2200 other diameters and lengths are available on request.

We are offering die molded graphite.die-molded graphite is a structural & functional material for many industrial and scientific engineerings. applications - molds, chutes, sleeves, sheathes, linings, etc. In continuous casting systems for making shaped steel, cast iron, copper, aluminum. - sintering molds for cemented carbides and diamond tools. - sintering molds for electronic components. - electrodes for edm. - heaters, heat shields, crucibles, boats in some industrial furnaces (such as furnaces for pulling monocrystalline silicon or optical fibers). - bearings and seals in pumps, turbines and motors. - and so on. programmable properties - fine grain - homogeneous structure - high density - excellent thermal conductivity - high mechanical strength - proper electrical conductivity - minimum wettability to molten metals

We are offering graphite rod of spectral purity. 1.dia6 x 300mm 2.bulk density:1.60g/cc min 3.compressive strength:25mpa min graphite rod of spectral purity 1.applications electrodes and/or crucibles for spectrographic analysis of elements in mineral metals and solutions. 2.programmable properties l high purity (spectral purity) l fine grain l high mechanical strength l good electrical conductivity 3.typical sizes dia6 x 300mm