Dingnuo Electric Co. Ltd.

zhejiang, China

We are offering tuning capacitor. Low-voltage dry-type capacitor is used the most advanced all-metal polypropylene film as raw material, introducing foreign advanced technology technique and equipment production accordance with national standards iec in strict, mainly for low-voltage power grid to improve power factor, reduce reactive loss and improve power quality. main features: 1self-healingexcellent self-healing properties, using the most advanced full-metal polypropylene film as the medium, if the medium be damaged, the metal electrode around this damage points in an instant incurs volatile disappear, and immediate resumption of insulation, so that the capacitor recover and continue normal operation. (2) low lossthe actual value less than 0.1%, so the capacitor has low energy consumption, less heat, low temperature, long life , good of energy saving. (3) securityin line with gb, iec standard, protection devices installed in a single-capacitor attached to the internal; when an exception occurs in a circuit or single-capacitor , the protection device will be an immediate action, automatically cut off power to prevent a secondary disaster. Attached to the discharge resistor, to ensure safety of electricity and maintenance . Shell made of pressed steel, painted lacquer baked high temperature inside and outside which has good weather resistance ability, so it has high security. (4 )conveniencesmall size and light weight, easy to install and carry technical parameters standard: gb12747-1 (2004) iec60831-1 (1996/2002) iec60831-2 (1995). form: dry self-healingambient temperature: house type, the working environment temperature -25 +50 , humidity : 95%, altitude : rated voltage: 230, 260, 440, 480, 525, 660, 690 v (voltage levels according to demand can up to 1000v)rated capacity: 10 100kvarcapacity error: -5% to +10%. allow over-voltage: below 110% of rated voltage (intermittent use). allow over-current: below 130% of rated current. dielectric loss: 0.2w/kvar below. discharge characteristics: built-in discharge resistors, residual voltage drops below 50v in 1 minute when capacitors cut off power . filling: smothering stone (with fire-proof, explosion-proof, pressure-proof functions)appearance: squaredegree of protection: ip 42.

Low-voltage dry-type capacitor is used the most advanced all-metal polypropylene film as raw material, introducing foreign advanced technology technique and equipment production accordance with national standards iec in strict , mainly for low-voltage power grid to improve power factor, reduce reactive loss and improve power quality. main features: 1self-healingexcellent self-healing properties, using the most advanced full-metal polypropylene film as the medium, if the medium be damaged, the metal electrode around this damage points in an instant incurs volatile disappear, and immediate resumption of insulation, so that the capacitor recover and continue normal operation. (2) low lossthe actual value less than 0.1%, so the capacitor has low energy consumption, less heat, low temperature, long life , good of energy saving. (3) securityin line with gb, iec standard, protection devices installed in a single-capacitor attached to the internal; when an exception occurs in a circuit or single-capacitor , the protection device will be an immediate action, automatically cut off power to prevent a secondary disaster. Attached to the discharge resistor, to ensure safety of electricity and maintenance . Shell made of pressed steel, painted lacquer baked high temperature inside and outside which has good weather resistance ability, so it has high security. (4 )conveniencesmall size and light weight, easy to install and carry technical parameters standard: gb12747-1 (2004) iec60831-1 (1996/2002) iec60831-2 (1995). Form: dry self-healingambient temperature: house type, the working environment temperature -25 +50 , humidity : 95%, altitude : rated voltage: 230, 260, 440, 480, 525, 660, 690 v (voltage levels according to demand can up to 1000v)rated capacity: 10 100kvarcapacity error: -5% to +10%. Allow over-voltage: below 110% of rated voltage (intermittent use). Allow over-current: below 130% of rated current. Dielectric loss: 0.2w/kvar below. Discharge characteristics: built-in discharge resistors, residual voltage drops below 50v in 1 minute when capacitors cut off power . Filling: smothering stone (with fire-proof, explosion-proof, pressure-proof functions)appearance: squaredegree of protection: ip 42

We are offering capacitor. Low-voltage dry-type capacitor is used the most advanced all-metal polypropylene film as raw material, introducing foreign advanced technology technique and equipment production accordance with national standards iec in strict , mainly for low-voltage power grid to improve power factor, reduce reactive loss and improve power quality. main features: 1self-healingexcellent self-healing properties, using the most advanced full-metal polypropylene film as the medium, if the medium be damaged, the metal electrode around this damage points in an instant incurs volatile disappear, and immediate resumption of insulation, so that the capacitor recover and continue normal operation. (2) low lossthe actual value less than 0.1%, so the capacitor has low energy consumption, less heat, low temperature, long life , good of energy saving. (3) securityin line with gb, iec standard, protection devices installed in a single-capacitor attached to the internal; when an exception occurs in a circuit or single-capacitor , the protection device will be an immediate action, automatically cut off power to prevent a secondary disaster. Attached to the discharge resistor, to ensure safety of electricity and maintenance . Shell made of pressed steel, painted lacquer baked high temperature inside and outside which has good weather resistance ability, so it has high security. (4 )conveniencesmall size and light weight, easy to install and carry technical parameters standard: gb12747-1 (2004) iec60831-1 (1996/2002) iec60831-2 (1995). Form: dry self-healingambient temperature: house type, the working environment temperature -25 +50 , humidity : 95%, altitude : rated voltage: 230, 260, 440, 480, 525, 660, 690 v (voltage levels according to demand can up to 1000v)rated capacity: 10 100kvarcapacity error: -5% to +10%. Allow over-voltage: below 110% of rated voltage (intermittent use). Allow over-current: below 130% of rated current. Dielectric loss: 0.2w/kvar below. Discharge characteristics: built-in discharge resistors, residual voltage drops below 50v in 1 minute when capacitors cut off power . Filling: smothering stone (with fire-proof, explosion-proof, pressure-proof functions)appearance: squaredegree of protection: ip 42.

Structure abstract1, high-voltage capacitor in parallel covered a thin steel plate curved welded shell.both sides install brackets for lifting and grounding.outlet cover with porcelain sets, the box is fraught with good performance liquid medium in addition of heart-sons .2, the components composed of heart-sons, its structure for salient, ruffled, winding. the medium between the surface adopt polypropylene film which is easy to dipping and surface roughness .3, the interior of high-voltage shunt capacitor devices set a fire-retardant and self-discharge devices. Advantages are:1, to eliminate the burr of plate edge , which eliminate the high field strengths.2, to provide higher electric field strength than the average designed.3, reducing the loss of the capacitor.4, increase partial discharge inception voltage of the capacitor .the three features of the salient structure:1, low loss, low temperature rise.2, high capability of inrush current withstand .3, good performance of partial discharge . the advantages of Fuse-type high-voltage capacitor in parallel Included fuse type filigree continue to run after the action Standard (no fuse included) Small units within the capacitor when the capacitor failure, the included fuse and then quickly cut off point continue troubleshooting. Small units within the capacitor capacitor failure, the external fuse protection action, shall immediately replace the capacitor