Eview Industrial Limited

We are offering motorcycle gps tracking system with built-in relay and 3pcs super magnets. 1. Water proof and dust-resistant (ip66 rating).rn2. Internal gps&gsm antenna. High sensitivity.rn3. Inbuilt 3d g-sensor for power management and motion, shock alarm.rn4. Free real-time web based online tracking service.rn5. Arm/disarm function to protect your car/motorcycle.rn6. Reply maps link and car's real address (city, street, etc by sms).rn7. Geo-fence management.rn8. Over speed alarm.rn9. Listen in function.rn10. Car power lost alarm, low power alarm.rn11. Remote engine/oil cut-off by sms and website. rn12. Inputs detections for acc on/off, sos panic button or door open/close.rn13. Output: remote lock/unlock door or siren sounding. rn14. Built-in relay, 8mb flash memory.rn15. Data logging: 60000locations.rn16. Gprs blind area data re-upload function.rn17. Firmware upgrade over the air.rn18. Built-in 3cs super magnets to mount device to any metal surface.rn19. Backup battery: 1300mah. rn20. U-blox gps chip technology.rnrnev-603 is designed for motorcycle/vehicle security. its waterproof and integrates a high sensitive gps/gsm antenna. Ev-603 tracking system is easy and quick to install, saving costly installation time and fees. Plus voice monitor and engine control functions, this is simply your best choice for remote tracking.rnrnmain features as below:rnmain features:rn1. Water proof and dust-resistant.(ip-67 rated)rn2. Real-time tracking by sms/gprsrn3. Internal gps&gsm antenna. High sensitivity.rn4. Geo-fence control. (supports rectangular and polygonal types)rn5. Auto tracking by sms.rn6. Over speed alarmrn7. Power-lost alarmrn8. Built-in relay.rn9. Cut off engine or fuelrn10. Built-in super magnet to mount device to any metal surfacern11. One input and one output port for trigger alarm.rn12, internal back-up battery: 1000mahrnrnspecificationrndimension 55mm x 80mm x 26mmrnweight 135grnnetwork gsm/gprsrn850/900/1800/1900mhzrngps chip: u-blox 6rngps sensitivity -159dbmrndigital input 6-24v dcrnanalog input 0-15vrncold start 42 sec.rnwarm starts 38 sec.rnhot start 1 sec.rnbattery chargeable 3.7v 1000mah batteryrnoperation temperature -40c to +75crnhumidity 5%--95% non-condensing