FAR EAST YU LA INDUSTRY LIMITED

Shanghai, China

We are offering sodium naphthalene sulfonate formaldehyde (na2so4 less 5%). Descriptionyl-snf-a is a high range water reducer, high concentration naphthalene-based superplasticizer, also named naphthalene sulfonate formaldehyde condensate (nsf), snf, pns and fdn etc. yl-snf-a (na2so45%) contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable. Thus, it meets the requirements of chemical admixture specifications for concrete, complying with astm c 494, type f. Astm c 1017, gb8076-2008 and gb50119-2003 etc. uses1. yl-snf-a possesses the features of no retarding, no air-introducing, superplastic high water-reducing and strength enhancing. It has no chloride, low alkali content, low sulphonate, and high purity. It can be widely used in different concretes with less dosage and easy to use.2. yl-snf-a can be applied to make flowing, strong or steam-curing concrete. The minimum working temperature can be as low as zero centigrade degree. In steam curing, concrete with superplasticizer has to be strong enough before heating. The steam curing specification has to be pre-tested. It is particularly used as base material for compound admixtures. 3. it can prevent from the alkali-aggregate reaction because of the biggish alkali reactivity of aggregate or the alkali-aggregate reaction in the moist environment. advantage1. high water-reducing rate: yl-snf-a can reduce water 20-30%. It has features of superplasticizer, effectively increases concrete fluidity and reduces water penetration and segregation and improves the encapsulation force of the concrete with reinforcing steel bar. 2. strengthening: given the same amount of cement and slump requirement, this product with the dosage 0.5-1.2% can increase the concrete early strength and reinforced effect by 50-100%, 40-70%, 25-60% and 20-60% on day 1, 3, 7, and 28 respectively.3. high applicability: it can be used with different variety of cement. It is compatible with other admixtures.

We are offering sodium naphthalene sulfonate formaldehyde (na2so4 less 18%). Descriptionyl-snf-c is a naphthalene-based highly effective water reducing agent for promoting accelerated early and ultimate strength development, commonly referred to as a superplasticizer, also named naphthalene sulfonate formaldehyde condensate (nsf), snf, pns and fdn etc. Yl-snf-c contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable. It complies with astm designation c494, type f, astm c 1017, gb8076-2008 and gb50119-2003 etc. Uses1. produces the high slump flowing concrete with no loss in strength.2. produces low watercement ratio concrete with high strengths.3. ideal for using in high strength concrete, flowing concrete, early strength concrete, precast steam curing concrete, prestressed concrete etc. Where it is desired to keep the watercement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation.4. be used as basic material to produce others compound admixtures, (such as accelerating and water-reducing admixture, retarding and water-reducing admixture, pumping antifreeze and pumping water-reducing admixture, etc.) advantages1. substantial improvement in workability without increased water or the risk of segregation. Normal set without retardation, even when overdosed. Improved density and surface finish.2. high water reducing rate. 40% increase in 28 day strengths. High strengths after 8 hours.3. compatible with portland cement, normal portland cement, portland slag cement, flyash cement, portland pozzolanic cement, etc.4. improve workability (slump) of concrete when added into mixing truck.

We are offering sodium naphthalene sulfonate formaldehyde (na2so4: 7-9%). Descriptionyl-snf-b is a naphthalene-based highly effective water reducing agent for promoting accelerated early and ultimate strength development, commonly referred to as a superplasticizer, also named naphthalene sulfonate formaldehyde condensate (nsf), snf, pns and fdn etc. Yl-snf-b contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable. It complies with astm designation c494, type f, astm c 1017, gb8076-2008 and gb50119-2003 etc. Uses1. produces the high slump flowing concrete with no loss in strength.2. produces low watercement ratio concrete with high strengths.3. ideal for using in high strength concrete, flowing concrete, early strength concrete, precast steam curing concrete, prestressed concrete etc. Where it is desired to keep the watercement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation.4. be used as basic material to produce others compound admixtures, (such as accelerating and water-reducing admixture, retarding and water-reducing admixture, pumping antifreeze and pumping water-reducing admixture, etc.) advantages1. substantial improvement in workability without increased water or the risk of segregation. Normal set without retardation, even when overdosed. Improved density and surface finish.2. high water reducing rate. 40% increase in 28 day strengths. High strengths after 8 hours.3. compatible with portland cement, normal portland cement, portland slag cement, flyash cement, portland pozzolanic cement, etc.