Gresin Chemical Co., Ltd.

shijiazhuang, China

We are offering hydrogenated hydrocarbon resin.Gretack gm-100 is a waterwhite partially hydrogenated hydrocarbon resin with the characteristics of low melt-viscosity and narrow molecular weight distribution with excellent thermal stability, low odor, and water-soluble polymers like eva, sis, sbs, and apao. It is primarily used in hot-melt adhesives (hma), hot melt adhesives for hygiene products (hmpsa). Key characteristics:colorless and transparent.Odorless and low volatilityexcellent heat stabilityexcellent compatibility with various polymerswell-balance adhesive properties, including tack, adhesion and cohesion. Specificationsproperty typical value test methodsoftening point (ring & ball, oc) 102 astm e 28color (50% toluene solution, hazen)

We are offering hydrocarbon resins.Gretack gm-115 is a waterwhite partially hydrogenated hydrocarbon resin with the characteristics of low melt-viscosity and narrow molecular weight distribution with excellent thermal stability, low odor, and water-soluble polymers like eva, sis, sbs, and apao. It is primarily used in hot-melt adhesives (hma), hot melt adhesives for hygiene products (hmpsa). Key characteristics:colorless and transparent.Odorless and low volatilityexcellent heat stabilityexcellent compatibility with various polymerswell-balance adhesive properties, including tack, adhesion and cohesion. Specificationsproperty typical value test methodsoftening point (ring & ball, oc) 115 astm e 28color (50% toluene solution, hazen)

We are offering hydrogenated hydrocarbon resin for sale.Gretack gp-120 is a waterwhite fully hydrogenated hydrocarbon resin with the characteristics of low melt-viscosity and narrow molecular weight distribution with excellent thermal stability, low odor, and water-soluble polymers like sis and apao. It is primarily used in hot-melt adhesives (hma), hot melt adhesives for hygiene products (hmpsa). Key characteristics:colorless and transparent.Odorless and low volatilityexcellent heat stabilityexcellent compatibility with apao and siswell-balance adhesive properties, including tack, adhesion and cohesion. Specificationsproperty typical value test methodsoftening point (ring & ball, oc) 122 astm e 28color (50% toluene solution, hazen)

We are offering c9 hydrocarbon resin. hitack gl-140 hydrocarbon resin suppliers hitack gl-140 is a low molecular weight thermoplastic aromatic resin obtained from petroleum- derived monomers. It is odor improved grade with low odor and low voc, good compatibility with other resins and polymers. This grade is mainly used in adhesives, esp. Eva based hot melt adhesives. key characteristics:good compatibility with eva, sbsmutual solubilitygood thermal resistancelow voc and low odorwater resistanceinsulation and excellent chemical stability. Typical propertiesproperty unit typical value test methodcolor (50% resin solid in toluene) ga # max9# (astm d1544)softening point (ring & ball) c 135-145 (astm e28)acid value mgkohg max 0.10 (astm d974)bromine value g 100g max.35 (astm d1959)ash content % max.0.05 (astm d 1063)specific gravity 2020 1.01-1.08 (astm d71)applicationhot melt adhesive, shoes adhesive, psa, industrial paints, coating and rubber application packaginggl-140 is available in 25kgs paper bag or 500kgs1000kgs in bulk bag.Gresin and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the seller's conditions of sale.

We are offering c9 hydrogenated hydrocarbon resin.Hitack gl-120 is a low molecular weight thermoplastic aromatic resin obtained from petroleum- derived monomers. It is odor improved grade with low odor and low voc, good compatibility with other resins and polymers. This grade is mainly used in adhesives, esp. Eva based hot melt adhesives. Key characteristics:good compatibility with eva, sbsmutual solubilitygood thermal resistancelow voc and low odorwater resistanceinsulation and excellent chemical stability. Typical propertiesproperty unit typical value test methodcolor (50% resin solid in toluene) ga # max9# (astm d1544)softening point (ring & ball) c 115-125 (astm e28)acid value mgkohg max 0.10 (astm d974)bromine value g 100g max.30 (astm d1959)ash content % max.0.05 (astm d 1063)specific gravity 2020 1.01-1.08 (astm d71) applicationhot melt adhesive, shoes adhesive, psa, industrial paints, coating and rubber application packaginggl-120 is available in 25kgs paper bag or 500kgs1000kgs in bulk bag.Gresin and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the seller's conditions of sale.

We are offering c9 hydrocarbon petroleum resin for ink.Hitack gl-140 is a low molecular weight thermoplastic aromatic resin obtained from petroleum- derived monomers. It is odor improved grade with low odor and low voc, good compatibility with other resins and polymers. This grade is mainly used in adhesives, esp. Eva based hot melt adhesives. Key characteristics:good compatibility with eva, sbsmutual solubilitygood thermal resistancelow voc and low odorwater resistanceinsulation and excellent chemical stability. Typical propertiesproperty unit typical value test methodcolor (50% resin solid in toluene) ga # max9# (astm d1544)softening point (ring & ball) c 135-145 (astm e28)acid value mgkohg max 0.10 (astm d974)bromine value g 100g max.35 (astm d1959)ash content % max.0.05 (astm d 1063)specific gravity 2020 1.01-1.08 (astm d71) applicationhot melt adhesive, shoes adhesive, psa, industrial paints, coating and rubber application packaginggl-140 is available in 25kgs paper bag or 500kgs1000kgs in bulk bag.Gresin and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the seller's conditions of sale.

We are offering good quality c5 hydrocarbon resin.Pretack pa-95 is an aromatic modified c5 hydrocarbon resin with a narrow molecular weight distribution. It is odor improved grade with low odor, low wax cloud point. Its specific degree of modification provides an excellent compatibility with sbs, sis and eva polymers as well as with natural tackifier resins (like terpene, rosin and its derivatives). It has high aromatic content, especially suitable for application in sbs system adhesives. Key characteristics:good compatibility with sbs, sis, eva and other polymerslow wax cloud pointgood thermal resistancelow voc and low odor typical propertiesproperty test method unit typical valuecolor (50% resin solid in toluene) (astm d1544) ga # max5#softening point (ring & ball) (astm e28) 91-97melt viscosity(175) (astm d3236) mpas max 350wax cloud point (evaresinwax=204040) (etm 22-10) max 85glass transition temperature (tg) midpoint 47acid value (astm d974) mgkohg max 0.30specific gravity , @25 (astm d71) 2020 0.92-0.99note: eva=vinyl acetate content of 27.5%(wt), wax=paraffin wax at 68 melt point. Applicationhmpsa, solvent based psa, hot melt adhesive, sealants. Packagingpa-95 is available in 25kgs paper bag or 500kgs1000kgs in bulk bag.Gresin and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the seller's conditions of sale.

we are offering c5 hydrogenated hydrocarbon resins.pretack pa-95 is an aromatic modified c5 hydrocarbon resin with a narrow molecular weight distribution. it is odor improved grade with low odor, low wax cloud point. its specific degree of modification provides an excellent compatibility with sis, sbs, and eva polymers. it has low aromatic content, especially suitable for application in sis system adhesives. key characteristics:good compatibility with sis, sbs, eva and other polymerslow wax cloud pointgood thermal resistancelow voc and low odoran optimal tack cohesion balance in sis-based hmpsa.suitable for the manufacturing of high quality hm opp tapesc5 hydrocarbon resin manufacturerstypical propertiesproperty test method unit typical valuecolor (50% resin solid in toluene) (astm d1544) ga # max5#softening point (ring & ball) (astm e28) 92-96melt viscosity(175) (astm d3236) mpas max 350wax cloud point (evaresinwax=204040) (etm 22-10) max 105glass transition temperature (tg) midpoint 47acid value (astm d974) mgkohg max 0.30specific gravity , @25 (astm d71) 2020 0.92-0.99note: eva=vinyl acetate content of 27.5%(wt), wax=paraffin wax at 68 melt point. applicationhmpsa, solvent based psa, hot melt adhesive, sealants. packagingpa-95 is available in 25kgs paper bag or 500kgs1000kgs in bulk bag.gresin and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of employees and purchasers of your products. no warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the seller's conditions of sale.

We are offering c5 hydrogenated petroleum resin for paint.Pretack pl-91 is a light colored, premium, aliphatic hydrocarbon resin with a narrow molecular weight distribution. It is odor improved grade with low odor, low wax cloud point. It has excellent compatibility with eva, app, apao, styrene block polymers (such as sis, sebs, and sbs), natural rubber and many kinds of synthetic rubbers, as well as natural tackifier resins (such as terpene, colophonyl and its derivatives).this grade provides good adhesive capability, excellent aging stability and light color in hot melt pressure sensitive adhesive and hot melt adhesives applications. key characteristics:good compatibility with eva, sis, and other polymerslow wax cloud pointgood thermal resistancelow voc and low odorhydrocarbon resin chinatypical propertiesproperty test method unit typical valuecolor (50% resin solid in toluene) (astm d1544) ga # max5#softening point (ring & ball) (astm e28) 89-96melt viscosity(175) (astm d3236) mpas max 500wax cloud point (evaresinwax=204040) (etm 22-10) max 90glass transition temperature (tg) midpoint 47acid value (astm d974) mgkohg max 0.30specific gravity , @25 (astm d71) 2020 0.92-0.99note: eva=vinyl acetate content of 27.5%(wt), wax=paraffin wax at 68 melt point. Applicationhmpsa, solvent based psa, hot melt adhesive, sealants.

We are offering c5 hydrogenated petroleum resin.Pretack pl-2104 is a pure c5 hydrocarbon resin suitable for solvent based pressure sensitive adhesive labels and tapes. It is odor improved grade with low odor, low wax cloud point. It has excellent compatibility with natural rubber, many kinds of synthetic rubber, styrene polymer (e.g. Sis, sebs and sbs) and eva. This grade provides good adhesive capability, excellent aging stability and light color in hot melt pressure sensitive adhesive and hot melt adhesives applications. Key characteristics:good compatibility with eva, sis, and other polymerslow wax cloud pointgood thermal resistancelow voc and low odorgood tack cohesionpeel adhesion balancetypical propertiesproperty test method unit typical valuecolor (50% resin solid in toluene) (astm d1544) ga # max5#softening point (ring & ball) (astm e28) 96-104melt viscosity(175) (astm d3236) mpas max 500wax cloud point (evaresinwax=204040) (etm 22-10) max 85glass transition temperature (tg) midpoint 55acid value (astm d974) mgkohg max 0.30specific gravity , @25 (astm d71) 2020 0.92-0.99note: eva=vinyl acetate content of 27.5%(wt), wax=paraffin wax at 68 melt point. Applicationhmpsa, solvent based psa, hot melt adhesive, sealants. Packagingpl-2104 is available in 25kgs paper bag or 500kgs1000kgs in bulk bag.Gresin and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the seller's conditions of sale.