Guangdong Built-to-Last Energy Saving and Environmental Protection Itd

Guangzhou, China

We are offering polycarboxylate ether."product introductionjss-bm is a chloride-free, alkali-free and green environmentally friendly product.It is a concentrated product, with high water-reducing rate, good slump retention ability and good adaptability. Moreover, it can improve the strength and durability of the concrete.Technical specificationitems unit standard specificationappearance colorless to light yellow liquiddensity strength(%) gcm3 1.11.14ph value 4.07.0solid content % 49.550.5product characteristic1.high water reduction rate: the water reducing rate of concrete is above 35%;2.the slump retention and water-reducing performance are balanced;3.good adhesion:making concrete have excellent workability, non-layer, without segregation and bleeding;4.wide adaptability:it is compatible with ordinary silicate cement, silicate cement, slag silicate cement and all kinds of blending having excellent dispersibility and plasticity;5.good strength and durability: low shrinkage rate, alkali and chloride-free can enhance concrete strength and durability;6.environmental friendly product;7.good stability: this product is good for long-term storage and without layer and sediment.Scope of applicationjss-bm is especially suitable for high strength concrete for railway, traffic, bridge and electric power and so on. It is suitable for the preparation of high strength, high durability, self-compacting, steel fiber and self-leveling concrete.Method of use & notes1.jss-bm is concentrated product and it is not suggested to be used directly. 2.the recommended dosage is 1.45%2.2% after jss-bm has been compounded.3.as the construction requirements and raw materials are different, so, concrete mixing test should be made before using in order to insure concrete quality."

We are offering polycarboxylate based water reducing agent . Technical data sheetbuilt-to-last brand strong concrete agenttrade name: btl-sca product introductionas we all know that there are about 20-30% cement in the concrete is nonoperative, and they only role as fillers.so we produce this sca to solve this problem. uses use for ready-mix concrete , pumping concrete, mass concrete, high appurtenance requirement concrete and other high performance concrete with high durability requirementappurtenance light brown to light yellow liquidsolid content(%) 85%water reducing ratio (%) 8-12%content of air 1%-5%setting time suspend 1.5-4 hours (1.2-1.8% doped) ;suspend 0-2 hours (dosage 0.4-0.8% with superplasticizer admixture) compressive strength the 28 day strength increased by 10%-15% contraction ratio 135%maxpackage ibc toteplastic drumstorage 1. The agent should be sealed in dry place and avoid sunshine, the valid period is 3months with sealed in normal temperature.2. It needs to pass experiment again if out of the valid period. action principle of built to last brand strong concrete agent:1.increasing dispersion of concrete2.increasing adsorption capacity of water-reducing agent characteristics of built to last brand strong concrete agent:1.increasing strength of concrete. After using the strong concrete agent, the strength of concrete can be increased by 8%-20%; in the case of same strength and workability, cement dosage can be reduced by 10%-20%. 2.improving performance of concrete3.lower the cost by reducing cement and mineral powder dosage.4.environmental protection

We are offering polycarboxylate ether."product introductionjss-bm is a chloride-free, alkali-free and green environmentally friendly product.It is a concentrated product, with high water-reducing rate, good slump retention ability and good adaptability. Moreover, it can improve the strength and durability of the concrete.Technical specificationitems unit standard specificationappearance colorless to light yellow liquiddensity strength(%) gcm3 1.11.14ph value 4.07.0solid content % 49.550.5product characteristic1.high water reduction rate: the water reducing rate of concrete is above 35%;2.the slump retention and water-reducing performance are balanced;3.good adhesion:making concrete have excellent workability, non-layer, without segregation and bleeding;4.wide adaptability:it is compatible with ordinary silicate cement, silicate cement, slag silicate cement and all kinds of blending having excellent dispersibility and plasticity;5.good strength and durability: low shrinkage rate, alkali and chloride-free can enhance concrete strength and durability;6.environmental friendly product;7.good stability: this product is good for long-term storage and without layer and sediment.Scope of applicationjss-bm is especially suitable for high strength concrete for railway, traffic, bridge and electric power and so on. It is suitable for the preparation of high strength, high durability, self-compacting, steel fiber and self-leveling concrete.Method of use & notes1.jss-bm is concentrated product and it is not suggested to be used directly. 2.the recommended dosage is 1.45%2.2% after jss-bm has been compounded.3.as the construction requirements and raw materials are different, so, concrete mixing test should be made before using in order to insure concrete quality."