Guangzhou City Rocmachine Co. Ltd

Guangdong, China

We are offering automatic heel seat tacking lasting machine. model: ld-689bname: automatic heel seat tacking lasting machine capacity: 1500pairs/8hpower: 1.5kwhydraulic pressure: 5mpapneumatic supply: 0.6mpaheating power: 0.6kwn.w.: 1000kgdimension(lwh): 1720x950x1900mm ld-689b this automatic heel seat tacking lasting is special designed for the highest quality shoes. With auto-nailing function. After the toes and sides of shoes have been lasted, this machine will simultaneously last and tack the shoes at the heel area and save the labor cost. it can select the 22 or 26 nails working mode to make the heel lasting fastness and good performance. it is quick to change between the lady's and man's shoes. Quickly adjust the wipers and the wiper's position. the heel forming band has a perfect banding function, which improve the best lasting effect. the electric system uses plc controller. It is very easy to operate with high reliability.

We are offering 9-pincer computerized toe lasting machine (with hot melt), . model: ld-687maname: 9-pincer computerized toelasting machine (with hot melt) capacity: 1200pairs8hpower: 2.2kwhydraulic pressure: 5mpaheating power: 1.2kwn.w.: 1300kgdimension(lwh): 1750x1050x1950mm ld-687ma the machine with the automatic toe lasting. The plastic plate can choose the 2-step adjusted to match the shape of shoes and also can be quickly changed for different sizes of shoes and also can change automatically between left and right shoe. The vamp highly attached after lasting. Save labor cost and environmental protection. with the design of specially tracked wipers, the all-around multipoint "teflon" press fitting ensures the upper to be evenly attached to the last after lasting, no protrusion will occur. the electric system is controlled by plc and supported with the touch screen and diagrammatic operation system. There have 120 groups (a.b.c.d.e.f) of memory saving and deletion function. The machine also has self-examination function. the design of free calibrating of toe head pressing stroke supplies the most stable pressing force. each set pincers can be individually adjusted to their corresponding positions and function with automatic balancing. The operator can manually pull down or re-clamp any set of pincers. it has the pincers rapid installing and releasing structure. The fifth pincer, which adopts the new rotating technology structure, makes the upper more attached to the last. the last support plate has the 2-step uprising selection. It can avoid the incident of over pulling breaking the uppers. pincer-plate's shoe size adjusting uses synchronous moving horizontal and independently with two steps changing at one side. Faster and accurately.

We are offering automatic toe lasting machine (with hot melt). model: ld-687mb 9-pincer name: automatic toe lasting machine (with hot melt) capacity: 1200pairs/8hpower: 2.2kwhydraulic pressure: 5mpaheating power: 1.2kwn.w.: 1300kgdimension(lwh): 1750x1050x1950mm ld-687mb this machine is equipped with the automatic toe lasting. The plastic plate can choose the 2-step adjusted to match the shape of shoes and also can be quickly changed for different sizes of shoes and also can change automatically between left and right shoe. The vamp highly attached after lasting. with the plc control system, it is so easy to operate. with the design of specially tracked wipers the all-around multipoint "teflon" toe band ensures the upper to be evenly attached to the last after lasting, no protrusion will occur. the design of free calibrating of toe head pressing stroke supplies the most stable pressing force. each set of pincers can be individually adjusted to their corresponding positions and function with automatic balancing. The operator can manually pull down or re-clamp any set of pincersit has the pincers rapid installing and releasing structure. The fifth pincer, which adopts the latest rotating technology structure, makes the upper more attached to the last. the support plate has the two-step up-rising selection. It can avoid the incident of over pulling and breaking the uppers. pincer-plate's shoe size adjusting uses synchronous moving horizontal and independently with 2-steps at one side. Faster and accurately. pincer-plates shoe size adjusting uses synchronous moving horizontal and independently at on side. Faster and accurately.

We are offering hydraulic heel seat lasting machine. model: ld-589cname: hydraulic heel seat lasting machine capacity: 2000pairs/8hpower: 1.5kwhydraulic pressure: 4mpaheating power: 0.5kwn.w.: 500kgdimension(lwh): 1100x760x1600mm ld-589c it has full sizes of wipers and forming bands which fit every kinds of men and women's shoes. The forming bands are wrapped by chain and can give a good forming effect. this machine uses gears. Gear racks and ratchets to quickly and precisely adjust the auxiliary supporter. this machine is suitable for lasting the shoes with general and soft midsoles and with the heels high less than 170mm. this machine is equipped with the lasting height slightly changing device, which makes the machine easily adjusted and finds position accurately. the second time rising and pressing of the last supporter works with the wiper-heating device to increase the lasting effect. It smoothes the lasting area and upgrade the shoes quality.

We are offering 9-pincer automatic hydraulic toe lasting machine. model: ld-587cname: 9-pincer automatic hydraulic toe lasting machine capacity: 2000pairs/8hpower: 1.5kwhydraulic pressure: 5mpaheating power: 0.5kwn.w.: 1150kgdimension(lwh): 1700x980x1950mm ld-587c the machine sets up a new model for new generation toe lasting machine. With the basic fitting device of any kind of tow lasting machine, it also keeps the unique design method of our company. It is the best tool for shoes-making upgrade. the design of free calibration of tow head pressing stroke supplies surely very stable pressing force, unaffected entirely by oil temperature or different pressure. it has the pincers rapid installing and releasing structure. The fifth pincer, which adopts the new rotating technology structure, makes the upper more attached to the last. the newly designed synchronous descending function for last support plates, which can change the pincer quickly without removing the outer support. all-around forming band and specially tracked wipers ensure suppers more evenly and closely attached to lasts after lasting. No protrusion will happen. The surface becomes more beautiful and quality upgraded. pincer-plates shoe size adjusting uses synchronous moving horizontal and independently at one side. Faster and accurately.

We are offering 9-pincer hydraulic toe lasting machine (with hot melt). Model: ld-587cmname: 9-pincer hydraulic toe lasting machine (with hot melt) capacity: 1200pairs/8hpower: 1.5kwhydraulic pressure: 5mpaheating power: 1.2kwn.w.: 1200kgdimension(lwh): 1700x980x1950mm ld-587cm this machine sets up a new model for new generation toe lasting machine. With the basic fitting device of any kind of toe lasting machine, and with economic automatic hot melt cementing system. It also keeps the unique design method of our company. It is the best tools for shoes-making up-grade. the design of free calibration of toe head pressing stroke supplies surely very stable pressing force, unaffected entirely by oil temperature of different pressure. it has the pincers rapid installing and releasing structure. The fifth pincer, which adopts the new rotating technology structure, makes the upper more attached to the last. with the pincers loose and tighten separately function. all-around forming band and specially tracked wipers ensure uppers more evenly and closely attached to lasts after lasting. The vamp highly attached after lasting. Save more labor cost and environmental protection. with the automatic toe lasting. The vamp highly attached after lasting. Save more labor cost and environmental protection. pincer-plate's shoe size adjusting uses synchronous moving horizontal and independently at one side. Faster and accurately.

We are offering computerized heavy duty walled sole attaching machine. model: ld-685cmname: computerized heavy-duty walled sole attaching machine capacity: 2000pairs/8hpower: 2.2kwhydraulic pressure: 4mpan.w.: 1280kgdimension(lwh): 1200x1150x1980mm ld-685cm this machine using plc system and touch screen is totally hydraulic designed. It is suitable for out sole of jogging shoes, walled sports shoes and casual shoes or other shoes. The operation of outsole pressing and front-rear pressing can be accomplished simultaneously or separately. The heavy pressing force and firm attaching effect which helps the shoe making industry upgraded. the hydraulic automatic balancing system is adopted for the mechanism of pressing rods. The design of automatic bias angles setting makes shoes locating easy and even for boots. when the mechanism of front-rear tighting mechanical system backward, the special designed circuit controls the moving distance and make it easy to change the shoes. there is a pressure adjusting function for each action, which makes this machine to be suitable for thick outsole and various kinds of men's and women's shoes. the side attaching adopts whole hydraulic-control. Both sides of the shoe have pu foaming pressing objects which has been special designed to make a tight pressing according to the shape shoes and ensure the best performance of side attaching. The automatic balance and formative rememberance system suits any shapes shoes. So the shoe sole and the upper are jointed tightly.

We are offering hydraulic walled sole attaching machine. model: ld-685bname: hydraulic walled sole attaching machine capacity: 2000pairs/8hpower: 2.2kwhydraulic pressure: 4mpan.w.: 1080kgdimension(lwh): 1150x1200x1950mm ld-685b this machine is fully hydraulic controlled system. It is suitable for attaching outsole attaching of jogging shoes, walled sports and casual shoes or other shoes. The operation of outsole pressing, side pressing and front-rear pressing can be accomplished simultaneously or separately. The heavy pressing force and firm attaching effect save more labor cost. This automatic sole attaching mechanism makes an even and perfect pressing which helps the shoe industry upgraded. the hydraulic automatic balancing system is adopted for the mechanism of pressing rods. The height of rods not need adjust which helps simplify operation. The design of automatic bias angles setting makes shoes locating easily. the side attaching adopts total hydraulic action. Both sides of the shoe have the shape pressing block which has been special designed to make a tight pressing according to the shoe shape and ensure the best performance of the side adhensive. this machine is special suitable for all kinds of sports shoes, like men's and women's casual shoes, etc. There is a pressure adjusting function for each action.

We are offering universal hydraulic sole attaching machine. model: ld-685aname: universal hydraulic sole attaching machine capacity: 2000pairs/8hpower: 1.5kwhydraulic pressure: 4mpan.w.: 850kgdimension(lwh): 1070x900x1950mm ld-685a this machine is designed to make the higher pressure and suitable for any kind of high or low heel women's and men's shoes outsole attaching. Easy operation and good efficiency. all side rubber pads can be adjusted to exactly meet shoes' bottom shapes to bring forth a good attaching effect. the arm construction is hydraulic automatic balanced system. It is no necessary to adjust the height of arm which make the operation easy. the only difference between attaching men's and lady's shoes is the shift of the optional switch, which is convenient and easy to operate. The second pressing can adjust separately which makes it to be precise and convenient.

We are offering pneumatic sole attaching machine. model: ld-585cname: pneumatic sole attaching machine capacity: 600pairs/8hpower: 0.2kwhydraulic pressure: 0.6mpan.w.: 290 kgdimension(lwh): 850x530x1670mm ld-585c this machine is widely used in sport shoes, casual shoes and any other large rubber sole shoes. It uses the plc program controller and pneumatic system. this machine has the adjusting shoe height function. The operation mode is according to the safety standard. Only if pressing down the "stop" button, the machine safety program will open the door to avoid any damage. the operating mode is :put the large sole up to the pre-setting position and preset the auto/manual function. auto function: put the shoe on the right position, the cover will close automatically when the hand pulling out off the working area. The air inlet at same time. The machine will work automatically according the pre-setting time. manual function: put the shoe on the right position, after the hand pulling out off the working area, pressing down the working button and the following program is as the automation function.