Hangzhou Fuyang Jiabo Purification Engineering Co.,Ltd

Hangzhou, China

The compressed air is cooled in an air-to-refrigerant heat exchanger, at which point the condensed moisture is separated and drained off.the air is then reheated in an air-to-air heat exchanger by means of the incoming air, which also is pre-cooled before entering the air-to-refrigerant heat exchanger. This means that the compressed air leaving the dryer has a pressure dew point of 28.Features of refrigerated compressed air dryer: 1. We use the high temperature type refrigeration compressor of america tecumseh, copeland, francemaneurop, germany biezer.So it is table operation, small noise, low energy consumption, on the safe side2. Adopting unique gas - liquid cyclone separation design, separation is more thorough, lower dew point3. Compact structure, no foundation installation4. In the process of making, the air flowing through the part of the spray treatment5. With fault protection and fault alarm function.

Heatless type dryer takes advantage of the natural phenomenon of desiccant to establish equilibrium with their surrondings. In this type, wet air (fluid) is cycled automatically between two desiccant towers, one adsorbing the moisture from the wet fluid, while the other being regenerated. The wet fluid enters one tower, passes through the desiccant bed where the saturated moisture is absorbed. A small portion of the dried air at ambient temperature and pressure is passed through the desiccant bed in the second tower for regeneration. At present interval, the towers changeover automatically and the cycle continues giving out a regular supply of super dry air having dew points up to -70. features of heatless adsorption air dryers 1.wet air is cycled automatically between two towers and get dry air efficiently. 2.dew point can up to -40-703. System pressure drop is lower than 0.02mpa4. Easily operation & easily maintenance technical parameter of heatless adsorption air dryers: air inlet temperature: 50working pressure:0.61.0mpapressure loss:0.02mpainlet oil content:0.01ppmdew point:-40purge rate:612%working cycle:4-20mindesiccant:activated alumina or molecular sieve