Hangzhou T&j Industrial Gas-equipment Co.,Ltd

Hangzhou, Zhejiang, China

• MOQ 1 Set(s)
• Brand NameT&J

We are offering liquid oxygen plant. oxygen plant main technique target of oxygen plant products capacity （m³/hr） purity（%） pressure（mpa） oxygen 50-2000 99.6-99.8 0.25-22 liquid oxygen right amount 99.6-99.8% 0.25 nitrogen 50-3000 99.99-99.999 0.5-22 liquid nitrogen right amount 99.99-99.999 0.5-1.1 we can provide the special designs as the user requires. main equipment of oxygen plant 1、 air compressor 2、 air tank 3、 precision filter 4、 air pre-cooling system 5、 water separator 6、 molecular sieve purification system 7、 heater or molecular sieve purification system 8、 rectification column 9、 heater or the rectification column 10、gas bearing turbo-expander 11、liquid oxygen pump 12、filling device 13、electrical & instrument control system 14、liquid storage tanks 15、gas cylinders, etc main features of oxygen plant * this development and design of flow is new, my company use the technology to mature. * simple operation, convenient maintenance, starting time is short, unit power consumption is low. * oxygen of high purity and very stable, meet and exceed technical indicators of gb8982-1998《medical oxygen》 * use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *security -- the outside compression process is oxygen be compressed at room temperature, the inside compression process is liquid oxygen be compressed at low temperature, security than more with the inside compression process； extraction a lot of liquid oxygen from evaporation-condenser, to ensure that no accumulation of hydrocarbons; evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; reducing fire hazards. * reliability - liquid oxygen pump excellent performance, easy to maintain; booster compressor is one or two compression, oxygen compressor booster compressor is three or five compression, high reliability with booster compressor.

• MOQ 1 Set(s)
• BrandT&J

We are offering cryogenic oxygen plant. main technique target of oxygen plantproducts capacity （m³/hr） purity（%） pressure（mpa） oxygen 50-2000 99.6-99.8 0.25-22 liquid oxygen right amount 99.6-99.8% 0.25 nitrogen 50-3000 99.99-99.999 0.5-22 liquid nitrogen right amount 99.99-99.999 0.5-1.1 we can provide the special designs as the user requires. main equipment of oxygen plant 1、 air compressor 2、 air tank 3、 precision filter 4、 air pre-cooling system 5、 water separator 6、 molecular sieve purification system 7、 heater or molecular sieve purification system 8、 rectification column 9、 heater or the rectification column 10、gas bearing turbo-expander 11、liquid oxygen pump 12、filling device 13、electrical & instrument control system 14、liquid storage tanks 15、gas cylinders, etc main features of oxygen plant * this development and design of flow is new, my company use the technology to mature. * simple operation, convenient maintenance, starting time is short, unit power consumption is low. * oxygen of high purity and very stable, meet and exceed technical indicators of gb8982-1998《medical oxygen》 * use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *security -- the outside compression process is oxygen be compressed at room temperature, the inside compression process is liquid oxygen be compressed at low temperature, security than more with the inside compression process； extraction a lot of liquid oxygen from evaporation-condenser, to ensure that no accumulation of hydrocarbons; evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; reducing fire hazards. * reliability - liquid oxygen pump excellent performance, easy to maintain; booster compressor is one or two compression, oxygen compressor booster compressor is three or five compression, high reliability with booster compressor.

• MOQ 1 Set(s)
• Brand NameT&J

We are offering carbon containing purification device. how it works: at a certain temperature, the residual oxygen in the nitrogen and carbon contained catalyst carbon oxidation reaction occurs to produce carbon dioxide by pressure swing adsorption process to remove, and then after a high-precision filters, high purity nitrogen. technical characteristics: efficient carbon catalyst, advanced technology, good stability, high purity nitrogen; nitrogen, hydrogen, applies strict requirements place on the hydrogen and oxygen; deoxidation and a heater with high temperature materials, safe and reliable; increase in preheater device, heat recyclable deoxidation in the deoxy nitrogen, can save over 30% of energy consumption; adsorption dryer to remove the co2 and the depth of dehydration, adsorption capacity, adsorption time, low energy consumption; the dideoxy tower structure with a prepared, can be added to the continuous use of carbon catalyst to meet the user's continuous without stopping the machine; deoxidation tower carbon catalyst after use free of impurities and residual toner, no need to purge carbon catalyst can be added directly; imported plc control, safe and reliable; automatic interlock shorting a variety of fault alarm. technical indicators: production of nitrogen products: 10nm3 / h ~~ 500nm3 / h the raw material nitrogen purity: ≥ 99.9% finished product nitrogen purity: ≥ 99.9995% oxygen content: ≤ 5ppm carbon dioxide levels: ≤ 3ppm dew point: ≤ -60 ℃.

• MOQ 1 Set(s)
• Brand NameT&J

We are offering oxygen generator, oxygen plant. Main technique target of oxygen plant products capacity （m³/hr） purity（%） pressure（mpa） oxygen 50-2000 99.6-99.8 0.25-22 liquid oxygen right amount 99.6-99.8% 0.25 nitrogen 50-3000 99.99-99.999 0.5-22 liquid nitrogen right amount 99.99-99.999 0.5-1.1 we can provide the special designs as the user requires. main equipment of oxygen plant 1、 air compressor 2、 air tank 3、 precision filter 4、 air pre-cooling system 5、 water separator 6、 molecular sieve purification system 7、 heater or molecular sieve purification system 8、 rectification column 9、 heater or the rectification column 10、gas bearing turbo-expander 11、liquid oxygen pump 12、filling device 13、electrical & instrument control system 14、liquid storage tanks 15、gas cylinders, etc main features of oxygen plant * this development and design of flow is new, my company use the technology to mature. * simple operation, convenient maintenance, starting time is short, unit power consumption is low. * oxygen of high purity and very stable, meet and exceed technical indicators of gb8982-1998《medical oxygen》 * use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *security -- the outside compression process is oxygen be compressed at room temperature, the inside compression process is liquid oxygen be compressed at low temperature, security than more with the inside compression process； extraction a lot of liquid oxygen from evaporation-condenser, to ensure that no accumulation of hydrocarbons; evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; reducing fire hazards. * reliability - liquid oxygen pump excellent performance, easy to maintain; booster compressor is one or two compression, oxygen compressor booster compressor is three or five compression, high reliability with booster compressor.

• MOQ 1 Set(s)
• Brand NameT&J

We are offering methanol decomposition for hydrogen production unit. methanol in the temperature range of 220 to 300 degrees, cracking in the copper catalyst to generate hydrogen and carbon monoxide, carbon monoxide in the same catalyst under the reaction with steam to produce carbon dioxide, carbon dioxide is removed by pressure swing adsorption process, ultimately producing hydrogen. the reaction is: of ch3oh = 2h2 + co, co + h2o = h2 + co2, and the total reaction: of ch3oh + h2o = 3h2 + co2. process principles the reaction is as follows: the main reaction: ch3oh = co +2 h2 -90.7kj/mol co + h2o = co2 + h2 +41.2 kj / mol the overall reaction: ch3oh + h2o = co2 +3 h2 -49.5kj/mol side effects: 2ch3oh = ch3och3 + h2o +24.9 kj / mol co +3 h2 = ch4 + h2o +206.3 kj / mol reaction transforming the gas by the heat exchanger, cooling, condensing its composition h2 co2 co ch3oh h2o saturation of 73 ~ 74% 23 ~ 24.5% ~ 1.0% 300ppm the main reaction is an endothermic reaction, the use of external heat conducting oil. Conversion of gas by the heat exchanger, cooling, condensing into the scrubber tower kettle collection not transformed after methanol and water recycling technical indicators gas production: 2.5 ~ 300nm3 / h impurities: ≤ 10ppm working pressure: 0.05 ~ 1.0mpa pressure dew point: ≤ -40 ° c.

• MOQ 1 Set(s)
• Brand NameT&J

Main technique target of Nitrogen Plant Products Capacity （m³/hr） Purity（%） Pressure（Mpa） Oxygen Liquid Oxygen Nitrogen 50-3000 99.99-99.999 0.5-22 Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1 Main equipment of Nitrogen Plant 1、 Air compressor 2、 Air tank 3、 Precision filter 4、 Pre-cooler 5、 Water separator 6、 Purifier 7、 Heater of Purifier 8、 Rectification column 9、 Heater of the rectification column 10、Expansion Turbine 11、Liquid Pump 12、Filling device 13、Electrical & instrument control system 14、Liquid storage tanks 15、Gas cylinders, etc Main Features of Nitrogen Plant * This development and design of flow is new, my company use the technology to mature. * Simple operation, convenient maintenance, starting time is short, unit power consumption is low. * Use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *Security -- The outside compression process is oxygen be compressed at room temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process； Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards. * Reliability - liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor.

• MOQ 1 Set(s)
• Brand NameT&J

We are offering nitrogen plant. Main technique target of nitrogen plant products capacity （m³/hr） purity（%） pressure（mpa） oxygen liquid oxygen nitrogen 50-3000 99.99-99.999 0.5-22 liquid nitrogen right amount 99.99-99.999 0.5-1.1 main equipment of nitrogen plant 1、 air compressor 2、 air tank 3、 precision filter 4、 pre-cooler 5、 water separator 6、 purifier 7、 heater of purifier 8、 rectification column 9、 heater of the rectification column 10、expansion turbine 11、liquid pump 12、filling device 13、electrical & instrument control system 14、liquid storage tanks 15、gas cylinders, etc main features of nitrogen plant * this development and design of flow is new, my company use the technology to mature. * simple operation, convenient maintenance, starting time is short, unit power consumption is low. * use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *security -- the outside compression process is oxygen be compressed at room temperature, the inside compression process is liquid oxygen be compressed at low temperature, security than more with the inside compression process； extraction a lot of liquid oxygen from evaporation-condenser, to ensure that no accumulation of hydrocarbons; evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; reducing fire hazards. * reliability - liquid oxygen pump excellent performance, easy to maintain; booster compressor is one or two compression, oxygen compressor booster compressor is three or five compression, high reliability with booster compressor.

• MOQ 1 Set(s)
• Brand NameT&J

We are offering psa oxygen plant. According to the principle of pressure swing adsorption using zeolite molecular sieve as adsorbent zeolite molecular sieves have selective adsorption characteristics of nitrogen zeolite molecular sieve a large number of adsorption of oxygen in the gas phase is enriched in the role of the pressure swing adsorption nitrogen-oxygen separation. Two adsorption tower process, a tower adsorption of oxygen production, a tower desorption regeneration cycles of the pneumatic angle seat valve opening and closing of the plc intelligent program control so that the two towers, a continuous output of high-quality oxygen. technical features low energy consumption, equipment operation, cost, adaptability, and gas production is fast, easy to adjust purity; modular structure designed to save floor space; easy operation, stable performance, high degree of automation can realize unmanned operation; the internal structure of design, to improve the efficiency of the zeolite molecular sieve adsorption; special air diffusion device, reduce the airflow speed impact, and to extend the life of the zeolite molecular sieves; the key components of well-known brand is an effective guarantee for the quality of equipment; automatic interlock shorting device to ensure the quality of the finished product oxygen; optional touch screen display, dew point measurement, energy-saving control, dcs communications. Technical indicators oxygen production: 3 ~ 200nm3 / h oxygen purity: 90 ~ 95% oxygen pressure: 0.1 ~ 0.4mpa (available 0.4 ~ 3.0mpa) dew point: -40 ° c ~~ -60 ° c (atmospheric pressure)

• MOQ 1 Set(s)
• Brand NameT&J

We are offering oxygen plant. Main technique target of oxygen plantproducts capacity （m³/hr） purity（%） pressure（mpa） oxygen 50-2000 99.6-99.8 0.25-22 liquid oxygen right amount 99.6-99.8% 0.25 nitrogen 50-3000 99.99-99.999 0.5-22 liquid nitrogen right amount 99.99-99.999 0.5-1.1 we can provide the special designs as the user requires. main equipment of oxygen plant 1、 air compressor 2、 air tank 3、 precision filter 4、 air pre-cooling system 5、 water separator 6、 molecular sieve purification system 7、 heater or molecular sieve purification system 8、 rectification column 9、 heater or the rectification column 10、gas bearing turbo-expander 11、liquid oxygen pump 12、filling device 13、electrical & instrument control system 14、liquid storage tanks 15、gas cylinders, etc main features of oxygen plant * this development and design of flow is new, my company use the technology to mature. * simple operation, convenient maintenance, starting time is short, unit power consumption is low. * oxygen of high purity and very stable, meet and exceed technical indicators of gb8982-1998《medical oxygen》 * use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *security -- the outside compression process is oxygen be compressed at room temperature, the inside compression process is liquid oxygen be compressed at low temperature, security than more with the inside compression process； extraction a lot of liquid oxygen from evaporation-condenser, to ensure that no accumulation of hydrocarbons; evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; reducing fire hazards. * reliability - liquid oxygen pump excellent performance, easy to maintain; booster compressor is one or two compression, oxygen compressor booster compressor is three or five compression, high reliability with booster compressor.

• MOQ 1 Set(s)
• Brand NameT&J

We are offering psa oxygen generator. Working principle according to the principle of pressure swing adsorption using zeolite molecular sieve as adsorbent zeolite molecular sieves have selective adsorption characteristics of nitrogen zeolite molecular sieve a large number of adsorption of oxygen in the gas phase is enriched in the role of the pressure swing adsorption nitrogen-oxygen separation. Two adsorption tower process, a tower adsorption of oxygen production, a tower desorption regeneration cycles of the pneumatic angle seat valve opening and closing of the plc intelligent program control so that the two towers, a continuous output of high-quality oxygen. technical features low energy consumption, equipment operation, cost, adaptability, and gas production is fast, easy to adjust purity; modular structure designed to save floor space; easy operation, stable performance, high degree of automation can realize unmanned operation; the internal structure of design, to improve the efficiency of the zeolite molecular sieve adsorption; special air diffusion device, reduce the airflow speed impact, and to extend the life of the zeolite molecular sieves; the key components of well-known brand is an effective guarantee for the quality of equipment; automatic interlock shorting device to ensure the quality of the finished product oxygen; optional touch screen display, dew point measurement, energy-saving control, dcs communications. Technical indicators oxygen production: 3 ~ 200nm3 / h oxygen purity: 90 ~ 95% oxygen pressure: 0.1 ~ 0.4mpa (available 0.4 ~ 3.0mpa) dew point: -40 ° c ~~ -60 ° c (atmospheric pressure)

• MOQ 1 Set(s)
• Brand NameT&J

We are offering psa nitrogen generator. How it works: under some pressure due to dynamic effects, oxygen diffusion rate of nitrogen in carbon molecular sieve differences, within a short time, the oxygen molecules of carbon molecular sieve a large number of adsorption of nitrogen molecules in the gas phase enrichment to achieve the separation of oxygen and nitrogen. significant difference due to the adsorption capacity of the carbon molecular sieve oxygen with different pressure, reduce stress, to desorption of oxygen molecules adsorbed by carbon molecular sieves, carbon molecular sieve regeneration, able to repeat the cycle. Two adsorption tower in a tower adsorption capacity of nitrogen, another tower desorption regeneration cycles of the continuous output of high quality nitrogen. features: low energy consumption, equipment operation, cost, adaptability, and gas production is fast, easy to adjust purity; improve the process design, optimal results; modular structure designed to save floor space; easy operation, stable performance, high degree of automation can realize unmanned operation; the internal structure of design, to improve the efficiency of the carbon molecular sieve adsorption; special air diffusion device, reduce the airflow speed impact, and to extend the life of the carbon molecular sieve; automatic interlock shorting device to ensure the quality of the finished product nitrogen; multiple fault diagnosis, alarm and automatic processing capabilities; optional touch screen display, dew point detection, energy-saving control, dcs communications technical indicators: nitrogen flow rate: 5 ~ 5000nm3 / h nitrogen purity: 95 ~ 99.9995% nitrogen pressure: 0 ~ 0.8mpa (adjustable) dew point: -40 ° c ~~ -60 ° c (atmospheric pressure).

• MOQ 1 Set(s)
• Brand NameT&J

We are offering hydrogenation purification device. The role of catalyst, the reaction of low purity nitrogen, oxygen system by adding hydrogen to generate water to remove residual oxygen after further dehydrogenation re-entering the deep dehydration of the drying system to get high purity nitrogen. technical features automatic control hydrogenation capacity and high degree of automation, safety and reliability. Efficient catalysts, advanced technology, stable performance. Safe and reliable control components, reliable operation. Automatic interlock shorting, with a variety of fault alarm and automatic processing capabilities. technical indicators tjhn-a: nitrogen yield: 10 3000nm3 / h nitrogen purity: ≥ 99.9995% hydrogen content: 500ppm ~ 5% (adjustable) oxygen content: ≤ 5ppm dew point: ≤ -60 ℃ tjhn-b type: nitrogen yield: 10 3000nm3 / h nitrogen purity: ≥ 99.9995% hydrogen content: ≤ 5ppm oxygen content: ≤ 5ppm dew point: ≤ -60 ℃

• MOQ 1 Set(s)
• Brand NameT&J

We are offering psa nitrogen plant. How it works: under some pressure due to dynamic effects, oxygen diffusion rate of nitrogen in carbon molecular sieve differences, within a short time, the oxygen molecules of carbon molecular sieve a large number of adsorption of nitrogen molecules in the gas phase enrichment to achieve the separation of oxygen and nitrogen. significant difference due to the adsorption capacity of the carbon molecular sieve oxygen with different pressure, reduce stress, to desorption of oxygen molecules adsorbed by carbon molecular sieves, carbon molecular sieve regeneration, able to repeat the cycle. Two adsorption tower in a tower adsorption capacity of nitrogen, another tower desorption regeneration cycles of the continuous output of high quality nitrogen. features: low energy consumption, equipment operation, cost, adaptability, and gas production is fast, easy to adjust purity; improve the process design, optimal results; modular structure designed to save floor space; easy operation, stable performance, high degree of automation can realize unmanned operation; the internal structure of design, to improve the efficiency of the carbon molecular sieve adsorption; special air diffusion device, reduce the airflow speed impact, and to extend the life of the carbon molecular sieve; automatic interlock shorting device to ensure the quality of the finished product nitrogen; multiple fault diagnosis, alarm and automatic processing capabilities; optional touch screen display, dew point detection, energy-saving control, dcs communications technical indicators: nitrogen flow rate: 5 ~ 5000nm3 / h nitrogen purity: 95 ~ 99.9995% nitrogen pressure: 0 ~ 0.8mpa (adjustable) dew point: -40 ° c ~~ -60 ° c (atmospheric pressure).

• MOQ 1 Set(s)
• Brand NameT&J

We are offering mobile oxygen production plant. Mobile oxygen production plant is an oxygen generating system built in iso container. The oxygen is produced from compressed air by pressure swing adsorbtion technology. The compressed air system as well as the separation system is integrated in the container. features: transportable (pass for fork-lift and bolt-on iso corners) turnkey, plug&play solution designed for outdoors - the container is an excellent protection against rain and sun automatic start and stop operation standard outlet pressure 4barg; higher pressure available on request the unit can be equipped with surveillance system and audio visual alarm as an option. technical specification: model: mopp 4 mopp 8 mopp 13 mopp 30 capacity: 3.6 nm3/h 7.8 nm3/h 13.2 nm3/h 30 nm3/h operating conditions: -20°c to 40°c -20°c to 40°c -20°c to 40°c -20°c to 40°c iso container 10ft. 20ft. 20ft. 20ft. dimensions: 2.9x2.4x2.6m 6.1x2.5x2.6m 6.1x2.5x2.6m 6.1x2.5x2.6m weight: 2000kg 3550kg 4350kg 7000kg power: 4.5kw 12kw 17kw 21kw the unit designed for high ambient temperatures is furnished with container insulation and air conditioning; the surface is treated with special coating. mobile oxygen production plant is preferred compact solution design for outdoors, can be placed on the roof of the building or in the remote area. If you have specific requirements, do not hesitate to contact us and we will design you a solution to meet your requirements. oxygen from this containerized oxygen generating unit is being used in many applications like health-care, fish farming, ozone, waste water, glass works, pulp-and-paper etc.

• MOQ 1 Set(s)

We are offering cryogenic nitrogen plant. Main technique target of nitrogen plant products capacity （m³/hr） purity（%） pressure（mpa） oxygen liquid oxygen nitrogen 50-3000 99.99-99.999 0.5-22 liquid nitrogen right amount 99.99-99.999 0.5-1.1 main equipment of nitrogen plant 1、 air compressor 2、 air tank 3、 precision filter 4、 pre-cooler 5、 water separator 6、 purifier 7、 heater of purifier 8、 rectification column 9、 heater of the rectification column 10、expansion turbine 11、liquid pump 12、filling device 13、electrical & instrument control system 14、liquid storage tanks 15、gas cylinders, etc main features of nitrogen plant * this development and design of flow is new, my company use the technology to mature. * simple operation, convenient maintenance, starting time is short, unit power consumption is low. * use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *security -- the outside compression process is oxygen be compressed at room temperature, the inside compression process is liquid oxygen be compressed at low temperature, security than more with the inside compression process； extraction a lot of liquid oxygen from evaporation-condenser, to ensure that no accumulation of hydrocarbons; evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; reducing fire hazards. * reliability - liquid oxygen pump excellent performance, easy to maintain; booster compressor is one or two compression, oxygen compressor booster compressor is three or five compression, high reliability with booster compressor.

• MOQ 1 Set(s)
• BrandT&J

We are offering liquid nitrogen generator. main technique target of liquid nitrogen plant products capacity （m³/hr） purity（%） pressure（mpa） oxygen liquid oxygen nitrogen 50-3000 99.99-99.999 0.5-22 liquid nitrogen right amount 99.99-99.999 0.5-1.1 main equipment of liquid nitrogen plant 1、 air compressor 2、 air tank 3、 precision filter 4、 pre-cooler 5、 water separator 6、 purifier 7、 heater of purifier 8、 rectification column 9、 heater of the rectification column 10、expansion turbine 11、liquid pump 12、filling device 13、electrical & instrument control system 14、liquid storage tanks 15、gas cylinders, etc main features of liquid nitrogen plant * this development and design of flow is new, my company use the technology to mature. * simple operation, convenient maintenance, starting time is short, unit power consumption is low. * use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *security -- the outside compression process is oxygen be compressed at room temperature, the inside compression process is liquid oxygen be compressed at low temperature, security than more with the inside compression process； extraction a lot of liquid oxygen from evaporation-condenser, to ensure that no accumulation of hydrocarbons; evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; reducing fire hazards. * reliability - liquid oxygen pump excellent performance, easy to maintain; booster compressor is one or two compression, oxygen compressor booster compressor is three or five compression, high reliability with booster compressor.

• MOQ 1 Set(s)
• Brand NameT&J

We are offering membrane separation nitrogen generator device. Working principle according to the compressed air in a variety of gas solubility and diffusion coefficient of the difference in the membrane, resulting in gas through the membrane relative permeation rate, permeation rate was faster gas such as hydrogen and oxygen through the membrane after side was enriched in the membrane permeation, penetration rate of the slower gases such as nitrogen, argon and other stagnant side of the membrane enrichment to achieve the purpose of separation of oxygen and nitrogen. technical features simple to operate, reliable, high degree of automation, no moving parts to meet the long-term continuous operation requirements; on / parking easily and quickly boot a short time to the production of qualified nitrogen; the increase in the membrane can expand the system to produce nitrogen capacity to meet the needs of customers of different nitrogen production; the gas separation process noise, pollution-free, does not produce hazardous waste, producing high nitrogen clean; compact structure, easy installation, small footprint; equipment in the form according to user applications, box-type, pry-block, containerized, mobile. Technical indicators nitrogen yield: 5 ~ 1000nm3 / h nitrogen purity: 95 ~ 99.9% nitrogen outlet pressure: ≤ 1.2mpa dew point: -40 ° c ~~ -60 ° c (atmospheric pressure).

• MOQ 1 Set(s)
• Brand NameT&J

We are offering mobile nitrogen production plant. Mobile nitrogen production plant mobile nitrogen production plant is an nitrogen generating system built in iso container. The nitrogen is produced from compressed air by pressure swing adsorbtion technology. The compressed air system as well as the separation system is integrated in the container. features: •transportable (pass for fork-lift and bolt-on iso corners) •turnkey, plug&play solution •designed for outdoors - the container is an excellent protection against rain and sun •automatic start and stop operation •standard outlet pressure 5barg; higher pressure available on request •purity range from 95% to 99, 999% the unit is equipped with surveillance system and audio visual alarm as an option. technical specification: capacity: 2 to 300 nm3/h purity: 95% to 99.999%(10ppm) pressure dew point: -50°c operating conditions: -20°c to 40°c (50°c) iso container 20ft. (10ft.) dimensions: 6.1x2.5x2.6m (3.1x2.5x2.6m) power consumption: from 0.21 kw/m3 at 95% from 0.32kw/m3 at 99.5% from 1.0kw/m3 at 99.999% the unit designed for high ambient temperatures is furnished with container insulation and air conditioning; the surface is treated with special coating. mobile nitrogen production plant is preferred compact solution design for outdoors, can be placed on the roof of the building or in the remote area. If you have specific requirements, do not hesitate to contact us and we will design you a solution to meet your requirements. nitrogen from this containerized nitrogen generating unit is being used in many applications e.g. As inert gas in coal mining or petrochemical industry or cutting gas in laser cutting.

• MOQ 1 Set(s)
• Brand NameT&J

We are offering Vpsa Oxygen Plant. Working principle. Vacuum pressure swing adsorption air separation oxygen adsorption process of vacuum desorption is a super-atmospheric pressure, the oxygen molecular sieve to select the nitrogen adsorption in the air under pressure, but is not the adsorption of oxygen enriched product gas at the top of the adsorption tower output at the same time, another adsorption tower vacuum regeneration. When the adsorption tower in the adsorption state of near saturation prior to the tower automatic decompression desorption regeneration and other renewable adsorption tower pressurized adsorption system to take oxygen. This cycle, the two adsorption towers alternately repeated oxygen production and regeneration to achieve continuous preparation of oxygen. oxygen and nitrogen close to the boiling point, both difficult to isolate, in the gas phase with enrichment. The vacuum pressure swing adsorption oxygen generator usually only a purity of 90 to 95% oxygen (oxygen limit of 95.6% purity, the rest is argon), also known as oxygen-rich. Compared with the cryogenic air separation unit, which can be produced from the purity more than 99.5 percent oxygen. technical features oxygen scale of 10000m3 / h below the oxygen, lower power consumption, smaller investment; civil small amount of the installation cycle is shorter than the cryogenic air separation unit; device operation and low maintenance costs; devices run high degree of automation, open parking is convenient, less operating personnel; device operation stability, safe; simple operation, the main components are the selection of internationally renowned manufacturers; the use of imported oxygen zeolite, superior performance, long life; technical indicators oxygen production: 100 ~ 10000nm3 / h oxygen purity: ≥ 90 to 95% (according to user requirements to be adjusted within the range of 30 to 95 percent) oxygen pressure: ≤ 20kpa (supercharged)

• MOQ 1 Set(s)
• Brand NameT&J

We are offering oil and gas industry specific nitrogen generator. both marine and terrestrial nitrogen in the oil / gas fields contain every aspect of upstream drilling and production and downstream refining. Nitrogen is widely used in the following aspects of the upstream oil and gas industry: 1) underbalanced drilling, completion, 2) oil and gas mining, to improve oil and gas recovery 3) oil and gas pipeline purge. whether it is in the remote mountainous areas, deserts, or offshore platforms, oil and gas industry-specific nitrogen generator can meet the different gas consumption, continuous with the requirements of the gas, to ensure that customers production. system components the three main components of the nitrogen system: a. Air compressor: diesel engine or electric motor driven air compressor, including a local control system. two. Nitrogen generator: air purification system, psa nitrogen system (or membrane nitrogen system) and the control system. 3. Supercharger unit: diesel engine or motor-driven supercharger, including local control system. technical indicators nitrogen flow rate :50-5500nm3 / h (95% purity) nitrogen purity :90-99.9% adjustable (same set of equipment flow, purity can be adjusted for flow and purity is inversely proportional to) sources of power: diesel engine (no need for external power source), or motor-driven (external power supply) cooling mode: water-cooled air-cooled (fixed displacement device is optional) applicable to the environment: -35 ℃ ~ 50 ℃ control modes: distributed control (plc in the control of major equipment complete local control) external form: box, pry the block, mobile non-standard products (nitrogen flow / purity / pressure based on the use of customer requirements, the use of the environment, the main purpose and the special requirements of customers), we will rely on years of professional experience, technical features professional and rigorous design and manufacturing, with mature and advanced technology to ensure superior system reliability. Our professionalism is reflected in - the experience, technology, design, service and other aspects, the whole process. supporting the professional leading manufacturers of complete sets of the air compressor group, booster engine, reliable quality, stable performance, low maintenance costs, can create more value for customers; eib to focus on the pressure swing adsorption system (or membrane separation system), control system with a total complete sets. intelligent control system to ensure that the system for a long time running smoothly, the normal life of more than 10 years; operation, maintenance, maintenance is simple and efficient. the high efficiency of the production of carbon molecular sieve (or membrane) nitrogen can increase the gas production per unit time, improve efficiency, reduce working hours, saving production costs, system operation more economical. nitrogen system package can be designed into the explosion-proof type of protection, explosion-proof, protection class according to user request. the entire nitrogen system is compact, easy to move. range of applications underbalanced drilling, completion three mining the job pipeline purge natural gas gathering and transportation station lng terminal offshore drilling / production platform natural gas purification plant.