Hebei XINYU Welding Co., Ltd.

Cangzhou, China

(1)the molten metal of xms-307hm is 20%cr-9%ni-6%mn.(2)the welding operation and crack resistance are well.(3)its used to weld thick plateor or binding large workpiece, carbon steel and stainless steel, dissimilar steel welding.

Characteristics ( 1 ) the molten metal of xms-308 is 20%cr-9%ni austenite structure.( 2 ) its used to weld 18%cr-8%ni stainless steel, such as aisi 304301302308, etc.( 3 ) stable arcweld pass forming is beautifulthe molten metal contains appropriate ferrite, crack resistance is well.

( 1 ) the molten metal of xms-308l is20%cr-9%ni low carbon structure.( 2 ) the welding operation, crack resistance and corrosion resistance are well.( 3 ) its used to weld low carbon 18%cr-8%ni stainless steel, such as aisi 304, 301, 302, 308, etc.

( 1 ) the molten metal of xms-308h is 20%cr-10%ni austenite structure.( 2 ) the carbon content of molten metal is higher than 308l and 308, high temperature strength is stable.( 3 ) its used to weld aisi 304, 308h stainless steel.

( 1 ) the molten metal of xms-308lsi is 20%cr-9%ni austenite structure.( 2 ) the flowability of weld pool is well, weld pass forming is beautifulcontains appropriate ferritecrack resistance and corrosion resistance are well.( 3 ) its used to faster weld 18%cr-8%ni thin stainless steel, such as aisi 301, 302, 304, 304l, 308, etc.

1 the molten metal of xms-308lmo is23%cr-13%ni-2%mo austenite structure.2the molten metal contains mo content, corrosion resistance is better than xms-309 when high temperature.weld pass forming is beautifulcontains appropriate ferritecrack resistance is well.3its used to weld between carbon steel with stainless steel, dissimilar steel welding.

1the molten metal of xms-309l is low carbon 24%cr-13%ni austenite structure.( 2 )the molten metal contains appropriate ferrite, the welding performance and crack resistance are well.3the cr content and ni content of molten metal are high, under 900 using xms-309, it has a good corrosion resistance and strength.4its used to weld between carbon steel , chromium-molybdenum steel with stainless steel, ais 309s13cr18cr.

( 1 ) the molten metal of xms-309lsi is 24%cr-13%ni austenite structure.( 2 ) the welding operation and the flowability of weld pool are better than xms-309lweld pass forming is beautifulcontains appropriate ferritecrack resistance and corrosion resistance are well.( 3 ) its used to weld between carbon steel with low carbon stainless steel, dissimilar steel welding.

( 1 ) the molten metal of xms-310 is 25%cr-20%ni austenite structure.( 2 ) the cr content and ni content of molten metal are high, under 1000 using xms-310, it has a good corrosion resistance and strength.( 3 ) its used to weld between aisi 310s, carbon steel , chromium-molybdenum steel with stainless steel, dissimilar steel welding. Its also used to weld stainless steel or stainless steel without magnetism.

Characteristics( 1 ) low temperature impact performance is intelligent, welding slag stripping is good.( 2 ) the welding wire has high melting rate, high efficiency, less flux consumption, unipolar, bipolar, ac dc power supply are common.( 3 ) belong to neutral flux, suitable for single and multi layer docking of pressure vessel, shipbuilding, steel structure brid ge, etc.

( 1 )welding bead appearance is smooth and beautiful, welding slag stripping is good.( 2 melting gold has excellent physical properties, unipolar, bipolar, ac dc power supply are common.( 3 ) suitable for the butt joint and fillet welding of general structural parts and important equipment.

Characteristics:( 1 ) suitable for multi-layer welding.( 2 ) welding bead appearance is smooth and beautiful, welding slag stripping is good., operational superiority. ( 3 ) suitable for butt welding and fillet welding in shipbuilding, machine building, steel bridge.

Characteristics( 1 ) low temperature impact performance is intelligentwelding slag stripping is good.( 2 ) the welding wire has high melting rate, high efficiency, less flux consumptionunipolar, bipolar, ac dc power supply are common.( 3 ) belong to neutral fluxsuitable for single and multi layer docking of pressure vessel, shipbuilding, steel structure bridge, etc.

Characteristics:(1)this product is the 600mpa grade high strength steel wire, it has very good mechanical properties. (2)with the mixed shielding gas, this wire widely used in steel, mining machinery, engineering machinery, automobile and other industries.Precautions:1. Pay attention to the gas purity and mixture ratio. 2. Keep the gas flow rate between 15 -25 l min. 3. The extension length keep between 15 to 20mm 4. Clear the oil, rust, moisture, dust and other debris of the welded parts. 5. Keep the welding hood clean and unobstructed.

(1) this product is the 600mpa grade high strength steel wire with the alloy elements of ni cr etc., it has very good mechanical properties. (2) with the mixed shielding gas, this wire widely used in mining machinery, automobile and other industries.Precautions:1. Pay attention to the gas purity and mixture ratio. 2. Keep the gas flow rate between 15 - 25 l min. 3. The extension length keep between 15 to 20mm 4. Clear the oil, rust, moisture, dust and other debris of the welded parts. 5. Keep the welding hood clean and unobstructed.

Feature & use:( 1 ) shielding gas is mixed gas, with low short-circuit current, weld pool fluidity & cracking resistance is the best., small splashing, thin slag easy to clean, adapt to thin steel plate with nice bead.( 2 ) adapt to single-pass welding and multi-layer welding , belongs to gmaw wire.( 3 ) wide current range, but nice bead. Notice:1.please use specialized welding gas, eg: purity ofco299.5%, h2o0.005%, ar99.99%.gas flow:20-25lmin.2.wind affects arc and welding pool, please take steps to block the wind.3.there is smoke when welding, pay attention to ventilation.4.distance betweentipand base steel is about15mmwhen current is below 250a; and2025mmwhen current is above 250a.5.welding materials should be stored in dry places.6.please check the welder , wire feeder, gas regulator and heater before operation.7.please keep the percentage of mixed gas stable and keep gas pressure stay the same.8.as to thin steel plate, downward welding in the inclined position or forward welding is recommended, (pictures are followed below).9.please moveplastic spoolandbasket spoolin a correct way.

Feature & use:( 1 ) xm-58 containing ti element, it adapts to high current welding.( 2 ) stable arc, small splash in high current.( 3 ) adapt to thick plate welding, such as construction machinery, bridges, steel structures etc. Notice:1.please use specialized welding gas, eg: purity ofco299.5%, h2o0.005%, ar99.99%.gas flow:20-25lmin.2.wind affects arc and welding pool, please take steps to block the wind.3.there is smoke when welding, pay attention to ventilation.4.distance betweentipand base steel is about15mmwhen current is below 250a; and2025mmwhen current is above 250a.5.welding materials should be stored in dry places.6.please check the welder , wire feeder, gas regulator and heater before operation.7.please keep the percentage of mixed gas stable and keep gas pressure stay the same.8.as to thin steel plate, downward welding in the inclined position or forward welding is recommended, (pictures are followed below).9.please moveplastic spoolandbasket spoolin a correct way.

Characteristics:( 1 ) the product is cr-mo steel mig welding wire.( 2 ) the molten metal contains 1.25%cr- 0.5%mo alloy content, its used to weld similar content alloy steel.( 3 ) its used to weld pearlitic heat resistant steel under 520oc working temperature, such as boiler pipe, high pressure vessel, oil refining equipment, etc.Precautions:( 1 ) adequately clear the oil, rust, moisture, dust and other debris of the welded parts.( 2 ) the hardening capacity of molten metal is strong in air-cool, it need preheat before welding and heat treatment after welding.( 3 ) preheat and interpass temperature in 135165, heat treatment after welding in 675705.

Characteristics:( 1 ) the product is 1.25cr0.5mo cr-mo steel mig welding wire.( 2 ) its used to weld similar content alloy steel, such as boiler pipe, high pressure vessel, oil refining equipment , etc.Precautions:( 1 ) adequately clear the oil, rust, moisture, dust and other debris of the welded parts.( 2 ) the hardening capacity of molten metal is strong in air-cool, it need preheat before welding and heat treatment after welding.( 3 ) preheat and interpass temperature in 135165, heat treatment after welding in 675705.

Characteristics:( 1 ) the product is 1.25cr-0.5mov cr-mo heat resistant steel mig welding wire.( 2 ) its used to weld pearlitic heat resistant steel under 540oc working temperature, such as boiler pipe, high temperature and high pressure pipe, oil cracking equipment, high temperature synthesis of chemical machinery , etc.Precautions:( 1 ) adequately clear the oil, rust, moisture, dust and other debris of the welded parts.( 2 ) the hardening capacity of molten metal is strong in air-cool, it need preheat before welding and heat treatment after welding.( 3 ) preheat and interpass temperature in 135165, heat treatment after welding in 675705.

Characteristics:( 1 ) the product is cr-mo heat resistant steel mig welding wire.( 2 )the molten metal contains 5%cr-0.5%mo alloy content, its used to weld similar content alloy steel.( 3 ) its used to weld oil refining, chemical industry equipment, such asm astm a387gr.5, jis scmv6. Precautions:( 1 ) adequately clear the oil, rust, moisture, dust and other debris of the welded parts.( 2 ) the hardening capacity of molten metal is strong in air-cool, it need preheat before welding and heat treatment after welding.( 3 ) preheat and interpass temperature in 160190, heat treatment after welding in 840870.

Characteristics:( 1 ) welding bead appearance is smooth and beautiful, welding slag stripping is good.( 2 ) melting gold has excellent physical properties, unipolar, bipolar, ac dc power supply are common.( 3 ) suitable for the butt joint and fillet welding of general structural parts and important equipment.

(1)the molten metal of xms-307si is 20%cr-9%ni-6%mn.(2)the welding operation and the flowability of weld pool are better than xms-307hm.(3)crack resistance is well, its used to weld thick plateor or binding large workpiece, carbon steel and stainless steel , dissimilar steel welding.

Feature & use:( 1 ) for 550 mpa high tensile steel, and applied to steel structures accordingly. Notice:1.please use specialized welding gas, eg: purity ofco299.5%, h2o0.005%, ar99.99%.gas flow:20-25lmin.2.wind affects arc and welding pool, please take steps to block the wind.3.there is smoke when welding, pay attention to ventilation.4.distance betweentipand base steel is about15mmwhen current is below 250a; and20-25mmwhen current is above 250a.5.welding materials should be stored in dry places.6.please check the welder , wire feeder, gas regulator and heater before operation.7.please keep the percentage of mixed gas stable and keep gas pressure stay the same.8.as to thin steel plate, downward welding in the inclined position or forward welding is recommended, (pictures are followed below).9.please moveplastic spoolandbasket spoolin a correct way.

Feature & use:( 1 )for 550mpa high tensile steel, containing ti and b, so it forms acicular ferrite micro structure, bearing excellent impact toughness. ( 2 )adapt to q460e high tensile steel, widely applied to petroleum gas pipeline and coal machinery etc. notice:1. Please use specialized welding gas, eg: purity ofco299.5%, h2o0.005%, ar99.99%.gas flow:20-25lmin.2.wind affects arc and welding pool, please take steps to block the wind.3.there is smoke when welding, pay attention to ventilation.4.distance betweentipand base steel is about15mmwhen current is below 250a; and2025mmwhen current is above 250a.5.welding materials should be stored in dry places.6.please check the welder , wire feeder, gas regulator and heater before operation.7.please keep the percentage of mixed gas stable and keep gas pressure stay the same.8.as to thin steel plate, downward welding in the inclined position or forward welding is recommended, (pictures are followed below).9.please moveplastic spoolandbasket spoolin a correct way.

Feature & use:( 1 ) operating condition is wide, from low to high current. It is a kind of solid wire.( 2 ) containing special alloy, its arc is stable even in high current.( 3 ) adapt to 490 mpa steel , like ships, steel structures, and machinery etc. Notice:1. Please use specialized welding gas, eg: purity of co299.5%, h2o0.005%, ar99.99%. Gas flow: 20-25lmin.2. Wind affects arc and welding pool, please take steps to block the wind.3. There is smoke when welding, pay attention to ventilation.4. Distance between tipand base steel is about15mmwhen current is below 250a; and20-25mmwhen current is above 250a.5. Welding materials should be stored in dry places.6. Please check the welder , wire feeder, gas regulator and heater before operation.7. Please keep the percentage of mixed gas stable and keep gas pressure stay the same.8. As to thin steel plate, downward welding in the inclined position or forward welding is recommended, (pictures are followed below).9. Please move plastic spooland basket spoolin a correct way.

Characteristics:( 1 ) welding bead appearance is smooth and beautiful, welding slag stripping is good.( 2 ) the applicability is good for rust, excellent hole( 3 ) unipolar, bipolar, ac dc power supply are common.( 4 ) suitable for the butt joint and fillet welding of general structural parts.

Characteristics:( 1 )the product is 1.25cr-0.5mov cr-mo heat resistant steel mig welding wire.( 2 ) its used to weld pearlitic heat resistant steel under 540oc working temperature, such as boiler pipe, high temperature and high pressure pipe, oil cracking equipment, high temperature synthesis of chemical machinery, etc.Precautions:( 1 ) adequately clear the oil, rust, moisture, dust and other debris of the welded parts.( 2 ) the hardening capacity of molten metal is strong in air-cool, it need preheat before welding and heat treatment after welding.( 3 ) preheat and interpass temperature in 135165, heat treatment after welding in 675705.

(1) this product is the general mag co2 welding wire and suitable for all-position welding(2) the wire have stable arc at low currents , less sparks and splashing, and adapt to larger current rangeprecautions1. Pay attention to the gas purity and mixture ratio. 2. Keep the gas flow rate between 15 25 l min. 3. The extension length keep between 15 to 20mm 4. Clear the oil, rust, moisture, dust and other debris of the welded parts. 5. Keep the welding hood clean and unobstructed.