Hebei Luma Wire Mesh Machine Co. Ltd.

hengshui, hebei, China

• MOQ 1 Set(s)

function features: it adopts synchronous control technology. the welding time and free running welding are controlled by plc numerical programmable system. the input panel falls into two types, touch screen or keyboard, which makes the opearation more reasonable and more intelligentizing. the welding is drived by pneumatic system, which makes the adusting of the welding pressure simple and convinent. the transversal wire feeding system is with hopper type drived by step motor. both the mesh pulling system and longitudinal wire feeding system are controlled by step motor. it is special for mine timbering mesh and the mesh opening size can be adjustable within certain scope. main parameters: wire diameter 6-8mm rated voltage 380v mesh opening 100*100-150*150mm rated power 441kva mesh width 1300mm mesh length 1300-2600mm longitudinal wire number 14 machine weight welding speed 40strokes/min overall dimension 7280*4110*1945mm

• MOQ 1 Set(s)

We are offering wire straightening machine, wire cutting machine. technical data: gt12 wire diameter: 5-12mm cutting length: 800-12000mm haulage speed: 80-120m/minute accuracy of cutting length: ≤±3mm capacity of pay- off: ∽2t rated power: 27.5kw machine size: 20*1.5*1.5m total weight: 4t gt12a wire diameter: 5-12mm cutting length: 800-12000mm haulage speed: 0-120m/minute accuracy of cutting length: ≤±3mm capacity of pay- off: ∽2t rated power: 27.5kw machine size: 20*1.5*1.5m total weight: 4t gt14 wire diameter: 8-14mm cutting length: 800-12000mm haulage speed: 0-180m/minute accuracy of cutting length: ≤±3mm capacity of pay- off: ∽3t rated power:55kw machine size: 20*2*1.5m total weight: 7t.

• MOQ 1 Set(s)

FINE WIRE WELDING MACHINE APPLICATION: floor heating mesh, 3D panel covered flat mesh, seedbed mesh, building roof pouring reinforced mesh, Cage mesh Main Features: 1. Both the line wire and cross wire feeding are from coil wires automatically. 2. Both the line wire spacing and cross wire spacing can be adjusted manually within certain range. 3. The finished product can be in mesh sheet or mesh roll. If the output form is in mesh roll, the machine will be equipped with the mesh coiling machine. If the output form in mesh sheet, th emachine can be equipped with the automatic mesh cutter or manual mesh cutter. The automatic mesh cutter can cut the mesh to the desired length automatically without stop welding. 4. The cross wire can be straightened and cut automatically by the machine itself. And it is equipped special device to cut and feed the cross wire precisely. Therefore, it can save the time and labor cost to slice the burr on the mesh edges. Precise cross wire cutting device patent No.: ZL02208722.2 Precise cross wire positioning device patent No.: ZL02208721.4 5. Mesh pulling system adopts the springy drag link and positioning device , which make the cross wire spacing size is more accurate, compared with other similar mesh roll welding machines. Springy drag link type mesh pulling device patent No.: ZL200520024380.9 6. The welding device takes new type of transformer with high efficiency. It has 8 different adjustable voltage grades, which enlarge the welding adjusting range and the weldable wire size range. 7. In order to adapt to the power transformer capacity and reduce the current impact, the welding control adopts the way of welding in one time but electricity input in several separate phases, that is (i.e.), the welding transformers work separately when welding one cross wire. 8. The welding adopts electric and electronic synchronous control technique. Both the welding time and separate phase-welding is composed of digital integrated circuit with high speed, stable function, high precision, firm welding spot without welding track. It is easy to operate. 9. In order to make the quota regulation and control more convenient, it takes digital mesh length counting device, electronic counter, and can control the cutting of the mesh cutter. It is very convenient and accurate to regulate the mesh length data. 10. the main structure is more well-set with complete function and compact which take up very small layout space. FINE WIRE MESH WELDING MACHINES Wire diameter: 1.5-2.5mm Mesh opening: 50*50mm-150*150mm Width: 900-1200mm Welding speed: 60times/minute Line & cross wire feeding from coil Automatic system for mesh cutting Excellent mesh accuracy Easy machine adjustments Easy maintenance & use

• MOQ 1 Short Ton

We are offering reinforce steel bar mesh machine. main features: 1、the welding current adopts micro-computer control. The welding time and current of each welding transformer can be adjusted separately 2、the operation interface is color touch panel and control buttons. It is easy and simple to operate. 3、the main body is box-style frame structure with stable function. 4、the welding pressure can be adjusted continuously which make the firm and beautiful welding spot. 5、the driving power of the machine is integrated speed reduction electromagnetic brake motor, controlled by frequency converter with adjustable speed. 6、the upper and lower electrode device is designed in modularization, which make the line wire spacing size adjustment faster, more simiple and convenient. 7、the cross wire feeding way: the revolving disc driven by step motor dropping the cross wires into welding. The cross wire feeding magazine is equipped with cross wire feeding supplement device -electric roller. Therefore, the cross wire feeding magazine can accommodate more cross wires compared with the common magazine. It can accommodate about 1.5ton cross wires. 8、the cross wire feeding magazine device is installed separately on one mobile frame, which make the eletrode spacing adjustment and machine maintenance more simple and convenient. 9、mesh pulling adopts pneumatic clamps controlled by servo motor. You can set diverse cross wire spacings in the same mesh panel. And the cross wire spacing size is accurate. 10、line wire feeding adopts mobile trolley controlled by step motor. It can make the line wires ready for welding the next mesh sheet when welding the current mesh sheet, which can save the operation time. 11、the machine is equipped with mesh sheet supporting roller frame and the mobile line wire placing tabe. the advantage compared with other pneumatic reinforcing steel bar welding machine: it doesn’t need the air compressor and cool dryer, which cut down the cost and save the layout space. When the environmental temperature is below zero degree, the pneumatic type machine may can’t work normally because the water is frozen in the pneumatic components. While, this machine is not impacted by the environment. the application of the mesh product: the reinforcing welded mesh for high-rise building, bridge, road, highway. technical data: wire diameter: 5-12mm mesh opening: 100*100mm-300*300mm width: max 2.5m welding speed: 50times/minute no. Of electordes: 41 pcs line & cross wire feeding from pre staighten & cut bar excellent mesh accuracy easy machine adjustments easy maintenance & use

• MOQ 1 Set(s)

Function Features: The machine adopts electrical and electronic syschronous control technique both welding time and cent-control welding is composed of digital and integrated electric circuit. This operation is accurate, it has stable function, firm welded point and without welded tracks. Not only welding speed is fast but also it is easy to learn and operate. The machine is equipped with precise equipment for weft cutting(that won the nation patent ZL02208722.2) and position(that won the nation patent ZL02208721.4), so the length of wefts is identical and regular, it is unnecessary to slice the side, mesh panel drawing system adopts elastic tension link(that met the nation patent ZL200520024380.9) and mesh opening positioning device, it is easy to regulate mesh hole and mesh opening size is rather accurate, welding aperture could adjust randomly within certain range. The main parameter: wire diameter 1.8-3.5mm rated voltage 380v welding aperture 50*50-200*200mm rated electrical power 189kva width of mesh 1200 overall dimension 1.8*2.5*1.8m number of warp 25 machine weight 3.2 welding speed 45strokesmin

• MOQ 1 Set(s)

Function Characteristics ----motor power 1.This machine adopts electrical & electronic synchronous control technique both separate-phase welding and welding time is composed of digital and integrated electric circuit. This opeartion is accurate, it has stable function , firm welded point and without welded tracks. 2.The cross and line wires are fed from coils. 3.This machine is equipped with precise equipment for weft cutting (that won the nation patent ZL2208722.2)and position (that won the nation patent AL02208721.4), so the length of wefts is identical and regular, it is unnecessary to slice the side. 4.Mesh pulling system adopts elastic tension link(that won the nation patent ZL200520024380.9)and opening positioning mesh, it is easy to regulate the mesh hole and mesh opening size is rather accurate, welding aperture could adjust randomly with range. Not only welding speed is fast but also it is easy to learn and operate.Only two men can finish the operation. 5.The finished products can be in coil or in panel. The main technical parameters Wire dimater 1.4-2.3mm Line wire feed continuous Cross wire space 50-200mm Cross wire feed continuous Line wire space 50-200mm Rated voltage 380V Width of mesh 1200mm Rated electrical power 36KVA×2 Welding speed 50times/min Overall dimension 2.5 X 2.5 X 1.5M Number of warp 25 Machine weight 2800KGS

• MOQ 1 Set(s)

The machine can make the brickforce for construction. The finished brickforce is in rolls and the machine can output three brickforce rolls at the same time. It is easy to operate and maintain. The brickforce is used in the brickwork reinforcement. It can be black brickforce or galvanized brickforce. The application of the brickforce: Brick Force masonry reinforcement is specified into projects by consulting engineers for it's cost and time saving properties. Brick Force consists of two parallel wires joined by cross wires. The flattened profile of the main wires allows for efficient lapping and ensures sufficient mortar cover to develop bond. Brick Force is available in both galvanised and stainless steel material. 5． Brickforce wire mesh welding machines Technical data: Operators needed: 2 persons .The components of the brick reinforcement machine: Main welding part 1unit Mesh coiling part 1unit Auxiliaries needed: Wire straightening and cut machines 2 sets Line wire straightening rollers 1set Line wire payoffs 6sets Electric cutting tool 1piece The mesh product specifications made by the machine

• MOQ 1 Set(s)

Application: Construction mesh, enclosure mesh, seedbed mesh, 3D panel covered mesh Main Features: 1、the line wire feeding is from coil wires automatically. 2、Both the line wire spacing and cross wire spacing can be adjusted manually within certain range. 3、The cross wire feeding is in pre-cut wire. The originative cross wire feeding disc driven by step motor can drop cross wire one by one automatically into welding, which structure is compact and more reasonable. 4、The finished product can be in mesh sheet or mesh roll. If the output form is in mesh roll, the machine will be equipped with the mesh coiling machine. If the output form in mesh sheet, th emachine can be equipped with the automatic mesh cutter or manual mesh cutter. The automatic mesh cutter can cut the mesh to the desired length automatically without stop welding. 5、Mesh pulling system adopts the springy drag link and positioning device , which make the cross wire spacing size is more accurate, compared with other similar mesh roll welding machines. Springy drag link type mesh pulling device patent No.: ZL200520024380.9 6、The welding device takes new type of water cooling transformer with high efficiency. Each welding transformer can be adjusted steplessly with separate controller. It can prevent the transformer from heated and protect the welding transfomer itself effectively. 7、In order to adapt to the power transformer capacity and reduce the current impact, the welding control adopts the way of welding in one time but electricity input in several separate phases, that is (i.e.), the welding transformers work separately when welding one cross wire. 8、The electrodes adopts special alloy copper 9、The welding adopts electric and electronic synchronous control technique. Both the welding time and separate phase-welding is composed of digital integrated circuit with high speed, stable function, high precision, firm welding spot without welding track. It is easy to operate. 10、In order to make the quota regulation and control more convenient, it takes digital mesh length counting device, electronic counter, and can control the cutting of the mesh cutter. It is very convenient and accurate to regulate the mesh length data. 11、the main structure is more well-set with complete function and compact which take up very small layout space. Technical parameters: Wire diameter: 1.8-4mm Mesh opening: 50*50mm-150*150mm Width: 900-1200mm Welding speed: 50times/minute Line & cross wire feeding from coil Cross wire feeding from pre straighten& cut wire Automatic system for mesh cutting Excellent mesh accuracy Easy machine adjustments Easy maintenance & use

• MOQ 1 Set(s)

We are offering construction mesh welding machine. application: construction mesh, fencing mesh technical parameters wire diameter: 3-5mm mesh opening: 50*50mm-200*200mm width: max 2.5m no. Of electordes: 41 pcs welding speed: 50times/minute line wire feeding from coil cross wire feeding from pre straighten& cut wire automatic system for mesh cutting excellent mesh accuracy easy machine adjustments easy maintenance & use