Product introduction:ks-3c03 is a curing agent based on a procoagulant modification component in synthetic resins and solvents. It is the curing, sealing and hardening of concrete inside and outside surfaces, improving the strength of concrete, chemical resistance, and durability.construction instructions:1. Stir the material thoroughly before use.2, curing agent can be evenly sprayed on the surface after the final calendering of the concrete surface is completed.3. The construction time is about 2-4 hours after calendering (depending on the ambient temperature and humidity at that time) the basic requirement is that there is no free water on the surface.4. Immediately after removing the formwork, the facade concrete should be sprayed with an oil curing agent.construction temperature: minimum 5ctheoretical dosage: 28-33 square meters/kgproduct usage:the oil curing agent can form a high-performance water blocking film on the concrete surface, which can reduce the evaporation of moisture in the concrete, so as to achieve the purpose of curing the concrete. The utility model can be used for multiple purposes to harden and seal the base surface and improve chemical resistance and oil pollution resistance. Performance, especially for substrates that need to be coated or covered.product advantages:1. Excellent curing properties make the cement fully hydrated.2. Seal concrete and provide a dust-proof surface.3, construction is convenient, reduce labor.4, fast dry, clean.
Jiangmen, China
Write a Review
Li Dong Hui (JiangmenKasoleBuildingMaterialsCo.LTD.)
Share us via
