Jiangsu Xinghai Cable Co.,ltd - Outdoor Optical Fiber Cable

We offer Optical Fiber Cable.Description: The fibers 250um are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound.A steel wire locates in the center of core as a metallic strength member.The tubes and fillers are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part, then they are completed with a polyethylene (PE) sheath to be figure 8 structure.Characteristics: High tensile strength of stranded wires meet the requirement of self-supporting and reduce installation costGood mechanical and temperature performanceHigh strength loose tube that is hydrolysis resistantSpecial tube filling compound ensure a critical protection of fiberThe following measures are taken to ensure the cablewater-proof performanceSteel wire used as the central strength memberLoose tube is filled with special filling compound100% cable core fillingAPL moisture barrierComplies with Standard YDT 1155-2001 as well as IEC607941.

We offer Optical Fiber Cable.DescriptionGYXTC8S type optical cable is center pipe loosing filling , steel-PE adhesive jacket, 8 font self undertaken type ofoutdoor optical cable for communicationCharacteristics:Being used full section water retardant structure it possesses good water retardant and damp-proof propertySpecial factice is filled into loose tube which takes keyprotection to optical fiberVertical wrapped steel strip strengthens resisting lateral pressureability8 font self undertaken type structure possesses high tensilestrength and is convenient for aerial installation and itsinstallation cost is cheapThe service life of the product will be more 30 yearsComplies with Standard YDT 1155-2001 as well as IEC607941.

Product description:The fibers 250um are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant compound.in center of cable core is a steel wire strength member, Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable is completed with a PE sheath.Characteristics:Good mechanical and temperature performanceHigh strength loose tube that is hydrolysis resistantSpecial tube filling compound ensure a critical protection of fiberSpecially designed compact structure is good at preventing the loose tube from shrinkingPE sheath protects cable form ultraviolet radiationThe following measures are taken to ensure the cable watertight:Steel wire used as the central strength memberLoose tube is filled with special filling compound100% cable core fillingAPL moisture barrier

We offer Stranded Loose Tube Non-metallic Strength Member Non-armored Cable.Product description:The fibers 250um are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound.A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member.The tubes (and fillers) are stranded around the strength member into a compact and circular core. Outside the cable core is filled with the filling compound to protect it from water ingress. The cable is completed with a PE sheath.Characteristics:Good mechanical and temperature performanceHigh strength loose tube that is hydrolysis resistantSpecial tube filling compound ensure a critical protection of fiberexcellent crush resistance and flexibilityThe following measures are taken to ensure the cable water -proof performanceSingle Fiber Reinforced Plastic as the central strength memberLoose tube is filled with special filling compound100% cable core filling

We offer Stranded Loose Tube Armored Optical Fiber Cable.Product description:The fibers 250um are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant compound.A steel wire locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath. Characteristics:1.Accurate controlled length of the cable can ensure the cable has excellent tensile strength and temperature characteristics2.The material of PBT loose tube has excellent Hydrolysis resistance and high strength3.Inner of loose tube is filled with special ointment , thus can protect the optical fiber 4.Having excellent crush resistance5.Smooth outer sheath can reduce the friction when setting up6.PE sheath can prevent optical cable from Ultraviolet radiation7.100% cable core is filled 8.APL or PSP is used as moisture layer9.Storage or operating temperature :-40to +7010.Product standards:comply with standard YDT901-2009 as well as IEC60794-1

We offer unitube light-armored optical fiber cable.The fibers 250um are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistantfilling compound.the tube is wrapped with a layer psp .between the psp and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape.at last the cable is completed with a polyethylene (pe) sheath.Characteristics:1.having good mechanical and temperature characteristics2.the material loose tube having good hydrolysis resistance and high tensile strength3.inner of loose tube is filled with special ointment , thus can give critical protection of optical fiber4.excellent crush resistance and flexibility5.two parallel steel wire ensure the tensile strength of optical cable6.small diameter light weight, make it install more easier7.standard:comply with ydt 769-2010

The fibers 250umare positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound.Over the tube, water-blocking material is applied to keep the cable watertight. Two parallel Fiber ReinforcedPlastics (FRP) are placed at the two sides .The cable is completed with a polyethylene (PE) sheath. Good mechanical and temperature performanceHigh strength loose tube that is hydrolysis resistantSpecial tube filling compound ensure a critical protection of fiberTwo parallel FRP ensure tensile strength of optical cablePE sheath protects cable form ultraviolet radiationSmall diameter , light weight make it easy to installLong delivery length

We offer Stranded Loose Tube Non-metallic Strength Member Armored Cable. Description:The fibers 250um are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound.A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member.The tubes(and fillers) are stranded around the strength member into a compact and circular cable core.Then the cable core is covered with a thin Polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress.A layer of water-blocking materialis applied around the cable core to prevent it from water ingress all the same.After a corrugated steel tape armor is applied, the cable is completed with a PE outer sheath.Charateristics:Good mechanical and temperature performanceHigh strength loose tube that is hydrolysis resistantSpecial tube filling compound ensure a critical protection of fiberexcellent crush resistance and flexibilityThe following measures are taken to ensure the cablewatertightSingle Fiber Reinforced Plastic as the central strength memberLoose tube is filled with special filling compound100% cable core fillingPSP enhancing moisture-proof Standard:Complies with Standard YDT 901-2009 as well as IEC 60794-1.