Jingsen International Chemicals Co., Ltd

Specifications 1.low in price and good quanlity High flocking ability, excellent dry, wet wearing fastness. 2.clear patterns soft hand feeling Product description I. Properties: (1) Appearance: light white paste (2) Composition: high molecular polymer (3) Ion type: Negative ion type or Non-ionic type II. Characteristics (1) Good fastness, does not peel (2) Good luster and transparency, will affect the luster of organza flakes (3) Excellent in oxidation resistance performance, does not discolor (4) Effect of golden onion paste III. Reference formula 80 percent of golden onion paste 20 percent of golden onion flakes 100% IV. Application scope It is suitable for printing golden/silver flakes, pearl powder, colorful flakes on cotton or cotton blended fabrics. V. Printing processes As the printing effect of golden onion paste is not as good as that of golden onion paste, please select golden onion flakes according to the printing quality requirement, following is the flake printing process: golden onion paste ---adhering flakes---pressing---baking---forming. VI. Precautions: (1) Do not mix it with other adhesive pastes (2) After printing, immediately add the onion flakes and carry out hot pressing. (3) Generally it should be baked under a temperature of 130°C to 150°C for 2 minutes. (4) The Quality guarantee period is 6 months under room temperature. Product description I. Quality Indexes (1) Appearance: bluish milk white liquid (2) Composition: Multi-member copolymer latex of self-linking acrylic ester (3) Solid content: 41±1% (4) Viscosity: The initial viscosity is less than 120CP; working viscosity exceeds 8700CP. (5)PH Value: 3~4 II. Product features: (1) High flocking ability, excellent dry and wet wearing fastness. (2) The flocked fabrics have clear patterns and soft hand feeling III. Application scope: It is suitable for electrostatic flocking on cotton or cotton blended fabrics. IV. Reference formula: Magma ammonia cross-linking agent/catalyst: 100%, 2.4 grams/5 grams/1 gram (PH6.0~6.5)(PH6.8~7.0)

Specifications Transparent paste I. Properties: (1) Appearance: milk white paste. (2) Composition: high molecular polymer latex and filling compound (3) Ion type: Negative ion type or Non-ionic type II. Characteristics (1) Good screen-passing property, strong covering power, soft hand feeling. (2) Good elasticity, good fastness, well washable (3) Smooth and lustrous surface, not sticky to hands (4) environmental, good tenacity. (5) products quality is certify by SGS (6) softness/washable (7) good fastness (8) safe no harm to people For deep color For light color Elastic white paste 30% Elastic white paste 70% Elastic transparent paste 70% Elastic transparent paste 30% Colorants X% Colorants X%

Specifications discharge paste are environment friendly good fastness / soft / elastist easy to print dry in 150degree no tough feel Applications: The cotton cloth which is suitable to reactive dying Instructions: For white modulation Amount For color modulation Amount H-101 85-95% H-400 85-95% 100(active-discharge printing powder) 5-10% 100(active-discharge printing powder) 5-8% Coloring(pigment) X% Total 100% Total 100% To be baked for 1-3 minutes with 160-180 centigrade after printing 5-30 minutes.You can also hot pressing it for 10-25 seconds with 160-180centigrade.Suitable to the products which are high demand in color. How to solve the faults. There are many reasons may cause the product poor fastness. 1. There is too much soft silicone oil on the fabric. GUIDELINES; the effect will be better if you put FY-1002(catalyst)into it .You can also put 5-10% Nylon solid paste into it. 2. The surface of the paste has not dry fully. GUIDELINES: You should put it inside for 4-5 hours and let it dry naturally 3. The additional of colorants more than 10% GUIDELINES; You could use the higher concentration coloring(pigment) QUESTION TWO. 1 Why the color of the cloth change light or did not show after the product be baked or hot pressing? GUIDELINES ;Beause the knitting print paste is depend on the reducing agent to restore the color. You should choose the coloring(pigment)which is Oxidation resistance. QUESTION THREE: How to avoid becoming hard or it taking the shape of powder on the surface? Guidelines; When you are printing you adopted the method is the same as printing water-paste.

Specifications 1.Good elasticity, good fastness, well washable 2.High flocking ability, excellent dry and wet wearing fastness. Product description I. Quality Indexes (1) Appearance: bluish milk white liquid (2) Composition: Multi-member copolymer latex of self-linking acrylic ester (3) Solid content: 41±1% (4) Viscosity: The initial viscosity is less than 120CP; working viscosity exceeds 8700CP. (5)PH Value: 3~4 II. Product features: (1) High flocking ability, excellent dry and wet wearing fastness. (2) The flocked fabrics have clear patterns and soft hand feeling III. Application scope: It is suitable for electrostatic flocking on cotton or cotton blended fabrics. IV. Reference formula: Magma ammonia cross-linking agent/catalyst: 100%, 2.4 grams/5 grams/1 gram (PH6.0~6.5)(PH6.8~7.0) V. Processes Printing (or coating) on fabrics----flocking----drying ----curing for 5 minutes under a temperature of 100°C. VI. Precautions: (1) Do no store it in a place where the temperature is above 40°C or under 0°C. (2) The curing temperature and time must be strictly controlled. (3) The Quality guarantee period is 6 months under room temperature

Specifications Water based textile foaming paste. ISO9001:2000, SGS. Environment friendly. Elastic, soft, good coverage, fastness. Water based foaming paste for textile printing. Features: 1.Soft, good coverage , fastness. 2.Non stick hand. 3.Do not block the screen. 4.Dry in normal temperature. 5.Environment-friendly. Instructions: For deep color For light color White paste 10~30% White paste 70~100% Transparent paste 70~90% Transparent paste 0~30% Colorant X% Colorant X% It can be washed for 2 hours in 60°C water. Dry in normal temperature for about 48 hours after it printed.

• MOQ 10 Ton

Specifications Binder for pigment printing Ingredient:acrylic acid polymer Physicochemical properties: Appearance:white slightly blue light emulsion Ion:anionic/nonionic PH value:7-8 Characteristics 1. Eco friendly thickener for aqueous printing 2. Strong water cohesive and thickening ability 3. High concentration, small dosage, no influence to handle, good color yield, sharp definition. 4. To enhance colour depth in loop ager for disperse prints. 5. Tested by independent testing centers (SGS) in China. 6. Available to be used in cotton cloth, T/C cloth, nylon, special fibers and pass 110-120 degrees of heat treatment after finishing printing. Usage self-crosslinking type of binder, good compatibility with various pigments, preparation of paste, no fouling or clogging, good stability, directly mixed with pigment and thickener to prepare paste.Low formaldehyde content, can meet the requirements for export, application to pigment printing of various fiber fabrics. Application methods mixed with pigment, thickener and water for paste with stirring, adding some crosslinker(10-15% ratio to binder) will obtain better results, printing, drying and curing at 150°C for 3 mimutes or 170-180°C for 30 seconds.If dosage of pigment is 5-8%, adding 10-20% binder, for printing special dark color, increase the binder dosage. Package and storage:200kg plastic drum, sealed at cool, dry place, validity for 6 months.

Specifications （elastic white paste） Product description: I. Properties: (1) Appearance: milk white paste. (2) Composition: high molecular polymer latex and filling compound (3) Ion type: Negative ion type or Non-ionic type II. Characteristics (1) Good screen-passing property, strong covering power, soft hand feeling. (2) Good elasticity, good fastness, well washable (3) Smooth and lustrous surface, not sticky to hands III. Application scope: It is suitable for deep or light colored elastic cotton fabrics or cotton blended fabrics. environment friendly elastic white paste Elastic Paste 1. Color: Milk White / Milk White 2. Element: Multi-polymer & titanium powders & auxiliary / Multi-polymer & auxiliary 3. PH: 7.5-8.5 /7.0-8.0 4. Irons: Negative ions / Negative ions 5. Elasticity: 12-140000pcs / 10-120000pcs 6. Stability: Good / Good 7. Application: Printings for clothes, toys and textile; all kinds of cottons, TC clothes, blending, weaving clothes etc 8. Characteristics: Good covering power, high whiteness & elasticity, water-washing fastness, non stick, good hand-feeling and high elasticity

Specifications 1 print paste hot transfer print paste for fabric 2 softness/good fastness/washable 3 High elasticity 4 dry naturely 5 gloss This product is a print paste of water-based hot-melt performance. Its anionic. People use the product to print in cloths, it can cross-linking and self-cross-linking, it was used for Foil Printing , Glue printing , Flocking printing in every textiles . After printed with the product, the textiles are felt soft, Washable and Flexible. This product is stable property, Non-toxic, Environmental protection, is the best choice for printing in cloth and textiles. Technical order Serial number Project Instruction 1 Outward appearance Cream color and paste 2 Solid content (%) 50+1 3 PH 5-7 Packaging: 50KG /CAN Storage condition: 5- 35, put the product in the cool and dry place by sealed. Storage life: 6 Months Usage: The use of such products can be diversified; you can move the cold/silver paper on to the cloth with 150-170 by the traditional process, and you could also move the gold/silver paper to the cloth directly before the paste dry completely. Hot process method: 1. print on the cloth for 3-4 times 2. dry it naturally 3. bronzing in 150-170 Cold process method: Print on the cloth for 3-4 times→surface dry →bronzing→put up the cloths→dry it with 150-170 →finished goods Paste up the pearls process method: print on the cloth for 2-3times →paste up the pearls→dry naturally→hot pressing for 15 seconds with 150

Specifications Water based textile burnt out paste. ISO9001:2000, SGS. Environment friendly. Elastic, soft, good coverage, fastness. Water based textile burnt out paste. Printing process : 1. Mixing 10~20% burnt-out powder with burnt-out ink and stirring them evenly 2. Printing directly on cotton for 1-2 times(3-4 scrapes per time) 3. Baking for 1~3 minutes or hot pressing for 10 seconds with 180°C. 4. Clear the burned objects by washing it. . Note: 1. This burnt-out ink can be used on the fabric which contains 70% cotton only, but not the purified cotton. Adding proportions Burnt-out powder Burnt-out ink 10-20% 100% Printing process： 1. Printing directly with burnt-out ink on darcon for 1-2 times (3-4 scrapes per time). 2. Hot pressing for 10 seconds or baking for 1-3 minutes with 180°C. 3. Clear the burned objects by washing it. Note: 1. This burnt-out ink can be used on the fabric which contains 30% cotton only, but nor the purified darcon.

Specifications cracking printing paste mainly for screen printing, User friendly, Premium quality, Quick delivery, Competitive pricing White Cracking Paste-HCG402/Clear Cracking Paste-HCG410 cracking printing paste is mainly used to produce pattern cracking effect on general fabrics. It is environmental printing binder system free of formaldehyde, PVC, phthalate and heavy metals. Chemical Nature: Specialty Resin Compound, Titanium Dioxide, etc. Appearance: white HCG402; milky HCG410 PH value: 6.5-7 Features: Non-tacky, Soft Hand, cracking evenly and vividly, Formula: For white: HCG402 80%-90%, HCG410 10%-20% For medium color intensity: HCG402 40%-50%, HCG410 50%-60% For high color intensity: HCG402 10%-20%, HCG410 80%-90% Pigment emulsion no more than 10 %. Printing process: Base printing for 2 runs→cracking paste printing for 3 runs→air dry or through dryer→cracking pattern produced→130°C-150°C for 2 minutes through dryer or 130°C-150°C heat pressing for 10-15 seconds→2 hours washing fastness at 60°C for 3 times or more. Packing: 60kgs/HDPE drum for HCG402; 50kgs/HDPE drum for HCG410 Attention: 1.5%-3% special catalyst is recommended for better adhesion. Sharpness of cracking depends on paste deposit printed.