Yangzhou, China Our Products
Leading Manufacturer, Supplier & Retailer of Carbon Rod Electrode Gouging Carbon Rods and ARC Air Gouging Carbon Rod.
Process description
Air carbon arc gouging works as follows. An electric arc is generated between the tip of a carbon electrode and the workpiece. The metal becomes molten and a high velocity air jet streams down the electrode to blow it away, thus leaving a clean groove. The process is simple to apply (using the same equipment as MMA welding), has a high metal removal rate, and gouge profile can be closely controlled. Disadvantages are that the air jet causes the molten metal to be ejected over quite a large distance and, because of high currents (up to 2000A) and high air pressures (80 to 100 psi), it can be very noisy.
Application
As air carbon arc gouging does not rely on oxidation it can be applied to a wide range of metals. DC (electrode positive) is normally preferred for steel and stainless steel but AC is more effective for cast iron, copper and nickel alloys. Typical applications include back gouging, removal of surface and internal defects, removal of excess weld metal and preparation of bevel edges for welding.
Product Specification
| Diameter * Length ( mm ) | Diameter * Length ( inches ) | Current Range ( A ) |
| 3.2*305 | 1/8*12' | 130-180 |
| 4*305(355) | 5/32*12'(14') | 150-200 |
| 5*305(355) | 3/16*12'(14') | 200-250 |
| 6*305(355)(400)(455)(510) | 15/64*12'(14')(16')(18')(20') | 15/64*12'(14')(16')(18')(20') |
| 6.5*305(355) | 1/4*12'(14') | 320-370 |
| 7*355 | 9/32*14' | 350-400 |
| 8*305(355)(400)(455)(510) | 5/16*12'(14')(16')(18')(20') | 400-450 |
| 9*305(355) | 23/64*12'(14') | 450-500 |
| 9.5*305(355) | 3/8*12'(14') | 500-550 |
| 10*305(355)(400)(455)(510) | 3/8*12'(14')(16')(18')(20') | 550-600 |
| 11*305(355) | 7/16*12'(14') | 600-650 |
| 12*305(355) | 15/32*12'(14') | 750-850 |
| 12.7*305(355) | 1/2*12'(14') | 800-1000 |
| 13*305(355) | 1/2*12'(14') | 800-1000 |
| 16*305(355) | 5/8*12'(14') | 1000-1200 |
| 19*305(355) | 3/4*12'(14') | 1200-1400 |
Process description
Air carbon arc gouging works as follows. An electric arc is generated between the tip of a carbon electrode and the workpiece. The metal becomes molten and a high velocity air jet streams down the electrode to blow it away, thus leaving a clean groove. The process is simple to apply (using the same equipment as MMA welding), has a high metal removal rate, and gouge profile can be closely controlled. Disadvantages are that the air jet causes the molten metal to be ejected over quite a large distance and, because of high currents (up to 2000A) and high air pressures (80 to 100 psi), it can be very noisy.
Application
As air carbon arc gouging does not rely on oxidation it can be applied to a wide range of metals. DC (electrode positive) is normally preferred for steel and stainless steel but AC is more effective for cast iron, copper and nickel alloys. Typical applications include back gouging, removal of surface and internal defects, removal of excess weld metal and preparation of bevel edges for welding.
Product Specification
| Diameter * Length ( mm ) | Diameter * Length ( inches ) | Current Range ( A ) |
| 3.2*305 | 1/8*12' | 130-180 |
| 4*305(355) | 5/32*12'(14') | 150-200 |
| 5*305(355) | 3/16*12'(14') | 200-250 |
| 6*305(355)(400)(455)(510) | 15/64*12'(14')(16')(18')(20') | 15/64*12'(14')(16')(18')(20') |
| 6.5*305(355) | 1/4*12'(14') | 320-370 |
| 7*355 | 9/32*14' | 350-400 |
| 8*305(355)(400)(455)(510) | 5/16*12'(14')(16')(18')(20') | 400-450 |
| 9*305(355) | 23/64*12'(14') | 450-500 |
| 9.5*305(355) | 3/8*12'(14') | 500-550 |
| 10*305(355)(400)(455)(510) | 3/8*12'(14')(16')(18')(20') | 550-600 |
| 11*305(355) | 7/16*12'(14') | 600-650 |
| 12*305(355) | 15/32*12'(14') | 750-850 |
| 12.7*305(355) | 1/2*12'(14') | 800-1000 |
| 13*305(355) | 1/2*12'(14') | 800-1000 |
| 16*305(355) | 5/8*12'(14') | 1000-1200 |
| 19*305(355) | 3/4*12'(14') | 1200-1400 |
Sara(Magala New Energy Co. Limited)Guoji Industrial park Gaoyou City Yangzhou Jiangsu Provicne China - 225654
Share us via 
