ninechip

Guangzhou, China

1.product features: function limiting speedspeed range 10 to 120 kmhspeed limit deviation 1 kmhthe operating voltage range 9-36 vapplication temperature -40 to 85 rated power consumption 2 wapply to all kind of vehicle vibration-resistance performance indicators frequency 20-50hz acceleration 1 g electromagnetic compatibility the group of impulse voltage 4000 v the vehicle speed limiter can be installed in the car, bus, school bus, truck, garbage truck, oil tank truck, etc.!if the driver drives over speed, then there may be many traffic accidents.So, choose nxs-3 vehicle speed limiter is your best choice!we have original pvc cover and normal pvc cover, the oem will be welcome! no problem!connection way: 1. The standard connection way it so connect the fuel pump:the green wire of vehicle speed limiter should be connected the fuel pump in the car. The other side whichconnect the fuse box should be cut off and reconnect with the green wire. 2. If some vehicles have no fuel pump, please connect to the key switch.The green wire should be connected the on point. cut the wire behind the on point and green wirereconnected it. The fitter can see that there is the key switch. Turning the key , before turning, the volts is 0v, ( the fitter can measure voltages with multimeter). But after turning the key, it is 12v. Just connect this wire. The vehicle speed limiter can be installed in the vehicle with electronic pedal and mechanical pedal! we had got the soncap certificate, iec test report, ce certificate, fcc certificate, rohs certificate, ece certificate. Soncap: iaf code :ji03ce iec test report: uni2015091704sr-01 ce certificate no, : ctb150702006e-zs fcc certificate no.: ctb150702006e rohs certificate no.: ctb150702001c-zs ece certificate no.: 10r-058511

Product descriptionthis system is a forklift overspeed alarm. As the name implies, when forklift exceeds the standard speed, system will alarm to prompt driver attention to slow down.It is also a forklift speed limiter, which can directly limit the speed of forklift. Preset the speed value, such as 20kmh, then forklift speed will be controlled within 20kmh. No matter how to accelerate the forklift, it still run within 20kmh.Product featureswide voltage for power supply: dc12v24v dc48v, customisable .Wireless speed sensor, easy to install.High speed limit precision, overspeed alarm prompt.Remote control setting function.Two types of alarm: voice alarm and alarm light.4 levels of volume for adjustment, loud voice, up to 120 db.Alarm lock time: 099s, adjustable.If exceeding the speed preset, over the set lock time, will automatically lock and alarm.Waterproof, anti-vibration, anti-interference, waterproof grade up to ip67.Suitble for electricbattery forklifts, diesel forklifts, almost all forklifts.Electric parameterpower supply: dc 12v24valarm loudness: 120dbtachometer signal input parameter: high level: 2-6v; low level 0.3v; drive current: 15ma; frequency: 10k;mini width of pulse: 100us; effective signal: falling edge effective.Anti-vibration performance: frequency 20-50hz, acceleration 1g.Electromagnetic compatibility: anti group pulse voltage up to 4000v.Low temperature resistance: -40high temperature resistance: +85