Pingxiang Jinxin Trade Co.,Ltd

Pingxiang, Jiangxi, China

The HNMCC-A catalyst is produced by using honeycomb ceramics material as the supporter, special material as the coat and noble metals (Palladium and platinum) as the active component, which possesses the advantages of high catalytic activity, high thermal stability, long life, low pressure drop and high intensity etc. The performance of the catalyst is comparable to that of roughly identical foreign products. The HNMCC-A catalyst can be widely applied in the purification and deodorization of organic waste gas , which releases from chemical industry , manufacture of oil paint, enameled wire, metal printing, multicolor printing and leather, pharmaceutical industry and municipal sewage. The catalyst can ne especially applied in the treatment of the waste gas from acrylonitrile production device. Technical Specification Item Unit IndexSize mm 100x100x40, 50x50x50Surface area m2/g 1525Crushing strength Mpa 10Apparent density g/ml 0.650.75Decontamination index ml/m3 GB16297, 150 Technology Condition Item Unit IndexApplication temperature of catalyst 600Operating pressure Mpa 0.5Gas airspeed h-1 1500025000Residual oxygen content % 0.5

1. Reforming catalyst is mainly used for hydrogen methanol and water happen cracking transform reaction, into H2, N2, CO2, very small amounts in CH4, CO and necessary product H2 preparation.2. Characteristic1. One-way high conversion2. Side effects, not less, paraffin3. High strength, not easy pulverization, resistance is low3. Condition of usage1. In gas material 1ppm, chlorine content in sulfur

The benzene hydrotreating catalyst includes two kinds of JQ-1, JQ-2. In order to comply with state environmental requirements and meet the clean production of coal chemical industry, our company develops JQ series Benzene hydrotreating catalyst which used for benzene, toluene and xylene preparation from coking benzene hydrogenation. 1. JQ-1 Catalyst(1) Product DescriptionJQ-1 Catalyst is used in crude benzene hydrogenation two-stage fixed-bed pre-hydrogenation reactor at low temperature, for removing carbon disulfide, styrene and olefins and other unsaturated compounds and other substances(2) Technical Specification Item ValueColor Light yellowShape 2.5mmBar 2-3mmSphereCrushing strength 25N/cm 50N/pcSurface area 200m2/gPore volume 0.5ml/gBulk density 0.7g/mlWater adsorption 50%Service temperature 185-230 2JQ-2 Catalyst(1) Product DescriptionJQ-2 Catalyst is used in crude benzene hydrogenation two-stage fixed bed main reactor at low temperature, for further hydrogenate the materials which after the pre-reactor, thiophene sulfides, oxides and nitrogen converse to hydrocarbons, hydrogen sulfide, water and ammonia and other ingredients.(3) Technical Specification Item ValueColor Light blueShape 2.5mmBar 2-3mmSphereCrushing strength 25N/cm 50N/pcSurface area 200m2/gPore volume 0.5ml/gBulk density 0.7g/mlWater adsorption 50%Service temperature 270-350

Methanol Synthesis Catalyst are widely used in coal, oil and natural gas with gas and oil as raw material of low-pressure methanol synthesis reaction device (low pressure tubular column pipe and cold shock type synthesis tower, cold tube types synthesis tower etc other types of reactors). This product has the catalytic activity of low temperature, good thermal stability, selectivity high characteristic; the technical indexes have reached the international advanced level. Chemical composition This type of catalyst mainly composed of CuO, ZnO, Al2O3 and other additives. Physical Properties Shape Cylinders with black lusterSize, mm 5*(4-5) and 6*(3-4)Bulk density(kg/m3) 1300-1500Crush Strength , N/cm 200Surface Area m2/g 80-100 Technological Conditions Operation Temperature, 190-300Best Working Temperature, 210-260Operation Pressure, Mpa 3.0-15.0Space Velocity, h-1 4000-20000 Standard of QualityBeginning activated: space time yield of methanol 1.30 g/mlh Thermal stability:350, after high temperature heat-resistant, space time yield of methanol 1.00g/mlh