Qingdao Huashida Machinery Co., Ltd

We have Plastic Welder or Plastic Hand Extruder.model: Hj-30bvoltage: 220vpower of Extruder: 1020wpower of Hot Blower: 3400wwelding Rate: 3kg/5mmmachine Weight: 4.8kg application: 1.welding Pe and Pp Thermoplastics for Application InContainer Engineering2.plastic Fabrication 3.pipeline Construction4.landfill Sites and Abandoned Polluted Areas the Machine Has Absorbed the Technology from the Similar Products of Germany and Itlay and Adopted Imported Hot Machine. Due to Large Power, the Ext Rusion Volume Could Reach 3kg. Its Performance is Stable. the Integrated Design is Adopted for the Preheating Air and Screw Extruder. the Plasticizing Quality is Good and the Mould Design is Smooth Without Any Blockage. Also, There is No Dead Corner and Carbonization. the Fan Imported from Switzerland is Installed to Ensure Large Air Output, Adequa Te Heat and the Base Materials Will have a Higher Temperature Prior to Adhesion in Order to Achieve Good Melting Effect. the Machine Could Be Operated Simply and Light in Weight, Only 4kg, Whichhelps to Weld the Postion that is Difficult to Reach.purpose: It is Mainly Used for the Welding of Pp/pe/pvc Plates, Vessels and Chemical Tanks, the Connection of Pipeline, and Pipe Bends Making, Connection and Sealing of Varioous Plastic Pipes, and the Making and Fixing of Pastic Tanks, the Welding of Plastic Sheets and the Making of the Pipe Fittings and Bends of Different Shapes. in Particular, It is Fit for Outdoor Onsite Operation.

Plastic hand extruder Model: HJ-30B Voltage: 220V Power Of Extruder: 1020W Power Of Hot Blower: 3400W Welding Rate: 3KG/5mm Machine Weight: 4.8Kg APPLICATION: 1.Welding PE and PP thermoplastics for application in Container engineering 2.Plastic fabrication 3.Pipeline construction 4.Landfill sites and abandoned polluted areas The machine has absorbed the technology from the similar products of Germany and Itlay and adopted imported hot machine. Due to large power, the ext rusion volume could reach 3KG. Its performance is stable. The integrated design is adopted for the preheating air and screw extruder. The plasticizing quality is good and the mould design is smooth without any blockage. Also, there is no dead corner and carbonization. The fan imported from Switzerland is installed to ensure large air output, adequa te heat and the base materials will have a higher temperature prior to adhesion in order to achieve good melting effect. The machine could be operated simply and light in weight, only 4kg, whichhelps to weld the postion that is difficult to reach. Purpose: It is mainly used for the welding of PP/PE/PVC plates, vessels and chemical tanks, the connection of pipeline, and pipe bends making, connection and sealing of varioous plastic pipes, and the making and fixing of pastic tanks, the welding of plastic sheets and the making of the pipe fittings and bends of different shapes. In particular, it is fit for outdoor onsite operation.