Laboratory Apparatus

We offer the best product range of DIN Wear Instrument and Rapid Oil Extraction Apparatus.

DIN Wear Instrument

₹ 90.50 / Set Get Latest Price

Min. Order (MOQ) 1 Set(s)
Brand Name QINSUN
Usage Textile Testing Instrument
Total Carbohydrate 12 Months
Power Electronic
Certificate SGS

Brief Introduction: Din rubber abrasion testing machine is mainly used for the abrasion resistance detection of an elastic material, conveyor belts, rubber, tires, shoe soles, synthetic leather and other soft materials. Core advantages:With a small sample, save time, friction way of non-repetition, low noise, high efficiency, good reproducibility and easy to operate and so on.Applicable Standards:DIN 53516, JIS K6369 , GBT 20991, GB 20265-2006, GB20266-2006, SATRA TM174, BS 903, JIS K6264, GBT9867, ISO4649 Specifications:1. The test piece: 16mm, 6 15mm (D)2. Clamp load: 2.5N3. Weight load: 2.5N, 5N4. The fixture lateral displacement volume: 4.2mm wheel every lap5. Abrasive cloth: 60 #6. Roller Diameter: 150mm7. Roller Length: 460mm8. The roller speed: 40rpm9. predetermined stroke: 40m 20m10. Wear Speed: 0.32m sec11. Inclination: 3 test piece and the roller support shaft vertical angle12. Volume: 70 30 30cm13. Weight: 61kg14. Power source: 1, AC220V, 3A Din rubber abrasion tester main principles: What a load under a certain level in gauze, grinding a cylindrical cross-section sample determined stroke on the gauze surface, by measuring the amount of wear quality of the sample, and then by the density of the sample to calculate the volume of the amount of abrasion, in order to the test comparable, and finally be subject to the standard rubber, the test results are expressed as relative volumetric wear to verify the amount of gauze-based or full representation with respect to the amount of wear of a certain standard wear rubber base.

View Complete Details

Ask Latest Price & Details

Rapid Oil Extraction Apparatus

₹ 90.50 / Set Get Latest Price

Min. Order (MOQ) 1 Set(s)
Power Electronic
Application Textile Testing Instrument
Brand Name QINSUN
Warranty 12 Months

Seam Fatigue Tester Testing Standards Toyota TSL5101G Section 3.7, GMW 3405, Nissan M-0154, Ford Motor Co. BN 106-02, TSL5100G Section 4.22 Applications: The Seam Fatigue Tester is a two station bench top machine, used for evaluating fabric or leather seating materials resistance to tearing or needle hole elongation of a sewn seam. Each station includes a pair of suitable clamps for attaching the test sample. Product Information: A set up gage is used to set the 140mm sample clamp separation for each station.One or two stations can be tested at a time. Seam Fatigue Tester Testing Method: The operator installs the set up gage between one pair of sample clamps on a station. The sewn test sample is aligned and clamped into position.The set up gage is removed and installed on the second station. The second sample is aligned and clamped into position and the set up gage is removed. The desired number of test cycles is entered on the cycle counter and the test is started. Once this cycle count is reached the machine will automatically stop. Test samples are visually evaluated.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : packaged in wooden cases

Delivery Time : within one month

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back