rishbin

wuxi, China

Steel Deck produced by deck roll forming machine is smooth without any scratches. The steel deck is widely used to adhere to the concrete of industrial buildings well because of its high strength and large wavelength. The metal deck roll forming machine not only saves steel mold plate but also reduces the weight of stores. With same bearing capacity, it greatly economizes steel and cuts down investment costs.

The production of squarerectangular pipes adopts the combined roller. The roller position will be adjusted by spacer and motor adjustment to realize one set of the roller to apply for different size of pipe. The square or rectangular shaping is formed out before the tube welding, with important advantages in terms of power and material cost reduction. Square and rectangular industrial tube mills feature: The position of the roller will be adjusted automatically by the motor. And roller can be shared with different size, so time and labor are saved when changing size. Multipoint pre-flex assembled forming roller design technology, flexible Cold Roll Forming, high-quality product, low roller loss. AC motor drives individually, which is higher effective lower energy consumption and maintenance cost. Perfect shape of the tube, the R Angle maintain uniform.

Machine Parts in the Steel hot roll slitter Coil car Decoiler Peeler entry table Straightener. Shearing machine Loop table Coil guide and pinch roll Slitting machine Scrap winder (both sides) Loop table Separator and tension table Deflector roll and exit threading table Recoiler The overarm separator in the recoiler. Exit coil car for recoiler Hydraulic system Pneumatic system Electrical control system

A downspout forming machine, known as rainwater downpipe roll forming machine as well, has been designed for making square or round (circle or rectangular) rainwater pipes. A downspout has many different names as, waterspout, downpipe, drain spout, and roof drain pipe etc. According to the wiki, the downspouts are applied mainly as below: Downspouts are usually vertical and usually extend down to ground level. The water is directed away from the building's foundation, to protect the foundations from water damage. The water is usually piped to a sewer, or let into the ground. In the very beginning the downspouts are made of plastic, then PVC; due to the advancement of roll forming technology, people turn to roll formed pipes, and in modern times, most of the downspouts or rainspouts have been produced from pre-painted steel, galvanized steel, aluminum or copper.

Applications of pipe roll forming machine Downspout (downpipe) is a pipe for conveying rainwater from a roof or gutter to the ground, also referred to as leaderpipe, downpipe, or drainspout. The downspouts are more and more widely applied in rainwater storage solution. Downspout disconnection (sometimes called roof leader disconnection) represents a cost-effective onsite alternative for reducing the volume and cost of stormwater that requires public management. Runoff from residential rooftops is collected by eavestroughs, which are installed along the edge of the roofline. Water collected in the eavestrough is conveyed to ground level by one or more downspouts. Downspouts may then connect directly to the storm sewer system into the combined storm and sanitary sewer system