Shaanxi Elade Material Technology Co.Ltd

Parameters of platinum electrode for hydrogen rich water ionizer: substrate material:gr1 ti electrode column: gr1 ti electrode column connection: welding, spot welding or screw fixation coating process: high temperature sintering coating composition: platinum precious metal coating thickness: 0.25-5 m operating temperature: 65 operating ph: 2-12 operating current density: 2000a m2 coating features: platinum and titanium substrate combined with a solid, stable performance, high output current density, long operating life shapes: mesh, plate, tubular, rod, wire, or customized advantages: high corrosion resistance, long operating lifespan, anode dimensional stable, insoluble electrode, high current density, low operating voltage; low energy consumption, high production capacity; dsa light weight, reduce labor intensity; the base metal titanium can be reused. test: standard: "electrolysis water machine cas124-2007" "electrolytic cell anode coating hg t2471-2011" condition: 0.5mol h2so4; temperature: 401oc; anode current density:2.0a cm2, anode surface area:1.0 cm2, electrodes distance: 1.0 cm, adhesion: wipe the electrode surface with filter paper no foreign material; uniformity : x-ray fluorescence spectrometer 10% applications: hydrogen-rich cups, electrolysis water cups; hydrogen-rich generators;

High performance:1. High overpotential for the oxygen evolution reaction , strong ability of oxidation;2. Can be used under high current density , high current efficiency , long service life;3. Good corrosion resistance, higher stability in strong acid h2s04 or hn03;4. Tipbo2 anode, relative to traditional graphite electrode, has more easily machining, higher strength, better corrosion-resistance , longer service life, lower energy consumption , without expansion and peel off occurred in graphite electrode, there being no risk of increasing carbon content in the deposited metal products on the cathode;5. Compared with the traditional lead anode, tipbo2 anode's advantage lies in:(1) its strength is stronger, the mass is lighter, not easy to deformation during use, can maintain relatively fixed electrode distance, lower cell voltage, saves the electricity, electrode work is more stable, avoiding the economic loss caused by frequent maintenance to the customer, reduce workers labor intensity;(2) strong corrosion resistance, long service life, in use process lead dioxide dissolution rate is lowthe pollution of cathode products is slight(3) the corrosion mechanism of tipbo2 anode and lead anode is different. When lead anode is used in sulfuric acid system, its surface generates a layer of lead oxide thin film which can slow the corrosion of anode. But the film is loose, especially used in the electrolyte containing a small amount of chloride ion, the film is more prone to be punctured, eroded and come off; the exposed surface of the lead in deep layer continue to be oxidated and form a new film, again punctured, cycling in this way, speeding up the anode corrosion. However, tipbo2 anode is always the electrochemical corrosion occurred on lead oxide coatings at workcan keeping a lower anode corrosion ratethereforethe anode has relatively long service life.